电磁加热
- 网络electromagnetic heating
-
电磁加热解除近井凝析油堵塞效果研究解除气井有机沉积物堵塞用的解堵剂JD-3
Eliminating condensate blocking by electromagnetic heating Blockage Relieving Agent JD-3 for Removing Organic Precipitates in Gas Wells
-
基于金属薄板的电磁加热理论模型的研究
Research on Theoretic Model of Electromagnetic Heating Based on Sheet Metal
-
电磁加热解除近井地层凝析油堵塞的数学模型
Mathematical model to remove condensate blockage by electromagnetic heating
-
凝析油气井电磁加热增产影响因素研究
Research on the influence factors of increasing productivity by electromagnetic heating in condensate gas well
-
电磁加热&化学复合解除凝析油堵塞温度分布研究
Study on temperature distribution pattern during application of electromagnetic heating compounded with chemical injection to remove condensate blockage
-
本课题所研究的是模糊控制电磁加热电饭煲的智能控制系统的设计与实现。
This thesis focuses on the design and realization of the induction heating rice cooker control system using fuzzy control algorithm .
-
需要进一步研究电磁加热化学复合解除凝析油堵塞技术的热力化学机理,建立能描述该复杂过程的数学模型。
To further study the thermodynamic-chemical working mechanism of this new compounding technology so as to set up a mathematic model demonstrating this complicated process .
-
当井筒积液严重后可采用气举方式排液,应用电磁加热技术减轻近井积液对产能的影响;
When liquid accumulation in wellbore is serious , gas lift and electromagnetic induction heating technology can be used to discharge down-hole liquid and improve near wellbore permeability .
-
建立了井下电磁加热&化学复合解除凝析油堵塞的温度分布数学模型,采用数值方法进行求解。
The related pilot study has been completed , from which a mathematical model for temperature distribution during the condensate blockage removal process is established , which has been solved by numerical method .
-
实验表明采用本文设计的农用薄膜机组电磁加热系统后,生产节电率能达到54%,节电量约150kwh/t。
Experiments show that production energy saving rate can reach 54 % and electricity saving quantity about 150kwh / t after using the agricultural film unit electromagnetic heating system designed in this paper .
-
本文分析了电磁加热的原理,对电磁感应加热的功率进行了估算,得出了影响电磁加热的因素。
In this article , the principle of electromagnetic heating was analyzed first , and the power of electromagnetic induction heating was be estimated , then the factors affect the electromagnetic heating has been known .
-
为了给凝析油气井电磁加热增产技术的选井及加热工艺优化提供依据,通过数值模拟研究加热方式、产量、加热功率和孔隙度对加热解堵效果的影响。
In order to provide basis for well selection and heating technique optimization of electromagnetic heating , the impact of heating manner , production rate , heating power and porosity on block removal efficiency is studied by numerical simulation .
-
采用注入流体辅助电磁加热的技术可有效提高地层的加热半径。(5)电磁加热效果受可控因素如加热功率、产量的影响,同时也受到地层孔隙度、含水饱和度等地层因素的影响。
The combination of injecting fluid and electromagnetic heating can increase the heating radius . ( 5 ) The effect of electromagnetic heating can be dominated by the geological factors such as the porosity , water saturation , besides controllable factors such as heating power , flow rate .
-
PLC在电磁感应加热造纸烘缸中的应用
Application of PLC in Electromagnetic Induction Heated Dryer for Paper Production
-
电磁感应加热造纸烘缸及PLC控制系统的实现
Implementation of Electromagnetic Induction-Heating Cylinder Dryer in Paper Mill and the PLC Control System
-
介绍了电磁感应加热的基本原理,详细说明了PWM串联型中频感应电源的原理及各部分组成。
This paper introduced the principle of induction-hearting and the makeup of pulse width modulated ( PWM ) induction-hearting power system .
-
简述了电磁感应加热方式应用于热轧无缝钢管生产中荒管再加热的优越性。加热喷雾法制备DMFC扩散层的性能研究
Briefed in the paper are the advantages of the electromagnetic induction heating process employed for shell reheating in seamless steel tube manufacturing . Study on performance of MEA prepared by heated-spray method for direct methanol fuel cell
-
电磁感应加热理论研究及强力感应加热器设计
The Study of Electromagnetic Induction Heating and Design of Super Induction Heater
-
一种高频电磁感应加热封口机电源
A Power Supply for HF Electromagnetic Induction Heating Sealing Equipment
-
电磁感应加热在管道管口焊接预热中的应用
Application of the Electromagnetic Induction Heater to Pipe Mouth Welding Preheating in Pipeline
-
无缝钢管中频电磁感应加热炉的控制系统设计
Control System Design of Mid-Frequency Magnetic-Influence Heating Stove in Seamless Steel-Pipe Heating Processing
-
电磁感应加热技术在包装工程中的应用
Applications of electromagnetic induction heating technology in packaging engineering
-
造纸机电磁感应加热烘缸的研究与设计
Study and Design of Dryer Cylinder Heated by Electromagnetic Induction for Papermaking Equipment
-
电磁感应加热温度场建模方法的研究
A Study on the Model of the Temperature Field of Electromagnetism Induction Heating
-
电磁感应加热技术在注射机温度控制系统上的应用
Application of Electromagnetic Induction Heating Technology in Temperature Control System of Injection Molding Machine
-
因此,此前将电磁涡流加热技术应用于开发热水器的研究并不十分成功。
So the application of electromagnetism vortex in developing water heater is not very successful .
-
为满足这一要求,目前普遍采用电磁感应加热。
To satisfy these requirements , induction heating has been generally used for a long time .
-
电磁感应加热是目前将电能转换为热能的一种高效方式。
At present , electromagnetic induction heating is an efficient way to convert the electrical energy to thermal energy .
-
电磁感应加热烘缸是利用电磁感应加热技术的新型烘缸。
Dryer cylinder heating by electromagnetic induction is a new kind of dryer cylinder which based on the electromagnetic induction technique .
-
电磁感应加热系统高效率、高精度、稳定、可靠的控制是一个重要的研究课题。
The control for electromagnetic induction heating system with high efficiency , high accuracy , stability , reliability is an important research subject .