电渣焊

基于PLC的电渣焊控制系统的研制

Development of Electroslag Welding Base on PLC

利用PLC技术实现了电渣焊焊丝摆动系统的控制；

The oscillating control of welding wire for electroslag welding have been realized by PLC .

提高BHW-35钢电渣焊冲击韧度的试验研究&电渣焊跟踪喷水冷却新工艺

Testing Research for Improvement of Impacting Tenacity of Electroslag Welded BHW-35 Steel

箱型钢梁（柱）隔板管极电渣焊纵缝焊接的工艺性能改善

Application of electroslag welding for Box-Beam ( pillar ) 's tendon

超声振动电渣焊是本次研究的重点。

Ultrasonic vibration electroslag welding is the focus of this study .

电渣焊在箱型结构中的应用

Application on the elctric penetration slag welding in the box type structure

电渣焊焊缝收缩规律及结构下料尺寸的确定

Shrink rules of seam welded by ESW and determination of the size of workpiece

用大功率板极电渣焊焊接厚大锻件的试验研究

Trial Research for Heavy Forgings Welded by Large Power Electroslag Welding with Plate Electrode

椭圆封头电渣焊拼接时最佳焊接位置的计算机辅助设计

Computer aided design for optimum welding position in contacting ellipse head by electro-slag welding

用退火代替正火后的电渣焊工艺可大大提高生产效率。

The procedure using anneal instead of normalizing will improve the productive efficiency of electroslag welding joint .

首次将振动调制工艺应用到常规电渣焊中。

Vibratory conditioning technology ( VCT ) was used in the routine electro-slag welding ( ESW ) for the first time .

振动调制电渣焊工艺参数与接头性能相关性振动调制工艺在高炉用钢电渣焊中的应用

Correlation between Processing Parameters of Vibratory Electro-slag Weld Conditioning and Welded Joint Properties Experimental study on electro-slag weld of blast furnace steel using vibratory conditioning technology

从硬度统计表观察，振动电渣焊的硬度与振动方式及振动参数无明显相关性。

From Statistics of hardness , we can conclude that the hardness of vibration electroslag welding have little to do with modes of vibration and vibration parameters .

高压锅炉锅筒纵缝焊接时，采用的焊接设备为电渣焊。在不具备电渣焊的情况下用改进的埋弧自动焊成功的替代了电渣焊。

The welding of high pressure boiler longitudinal weld shall be electric slag welding which may be replaced by improved auto-submerged arc welding when have no electric slag welding .

据此，本文对目前国内的电渣焊技术进行学习和深入研究后，依据生产现场的要求以及电渣焊焊接工艺的要求，首先，对电渣焊的自动控制的总体方案进行了研究和设计。

So domestic alternative equipment is much-needed . Accordingly , this paper designs the general control system of the electroslag welding after deeply researching on controlling method and processing techniques .

针对高炉炉壳立缝需要在垂直位置焊接及钢板厚度大的特点，为保证焊接质量，采用了熔嘴电渣焊焊接工艺。

Pointing to characteristics that the erect joint of the furnace shell should be welded vertically and the steel plate is thick , the process of electro slag welding with consumable nozzle is adopted to ensure welding quality .

通过焊接熔透性工艺试验、调控焊接工艺参数、优选装配坡口尺寸、提高衬条及隔板加工精度，保证了电渣焊质量和焊接效率的提高。

In this weldability test , the weld defect is eliminated , and the welding quality and efficiency are improved by adjusting welding parameter , optimizing the groove size and enhancing the fabricating precision of the backing and the inner clapboard .

特别是BX3-500、BX3-630其优良的恒流特性和强劲的输出功率是钢筋电渣压力焊的首选配套电源。

Additionally , BX3-500 and BX3-630 features outstanding constant current property and powerful output which is the preferred power supply for steel bar electric residue pressure welding .

竖向钢筋电渣压力焊质量控制初探

A Research on Quality control of Vertical Rebar Electroslag pressure welding

竖向电渣压力焊施工操作方法特点

Construction Operation Method Characteristic of Perpendicular Electric Shock Pressure Weld

某工程电渣压力焊钢筋接头质量控制与经济效益分析

Quality control and economic analysis of Electroslag Pressure Welding Adapter

钢筋电渣压力焊全自动控制的研究与实现

Study and realization of full-automatic control for reinforcing bar electro-slag pressure welding

竖向钢筋电渣压力焊研究&工艺部分

Study on Electro-slag Pressure Welding Technology of Vertical Reinforced Bar

钢筋电渣压力焊的现场施工质量问题及防治

Quality Problems and Preventions of Steel Bar Electroslag Pressure Welding Locale Construction

钢筋电渣压力焊缺陷产生的原因及预防措施

Welding Defects in Reinforced bar Electroslag Pressure Welding Causes and Preventive Measures

电渣压力焊钢筋连接工艺的技术性能分析

Analysis on technical characteristic of steel bar welding by using electroslag welding machine

施工现场钢筋电渣压力焊的缺陷防治与验收

Field quality control of steel bar electroslag pressure welding

保证钢筋电渣压力焊质量的关键施工措施

The critical construction measures of ensuring the quality of steel bar electroslag welding

竖向钢筋电渣压力焊工艺推广应用

Application of Electroslag-pressure Welding for Vertical Reinforcing Bar

螺柱电渣压力焊的研究与实现

Study and Realization of stud electroslag pressure welding