甲基丙烯酸

jiǎ jī bǐng xī suān
  • methacrylic acid
甲基丙烯酸甲基丙烯酸
  1. 水溶性C(60)-甲基丙烯酸共聚物的摩擦学特性研究

    Study on tribological property of water-soluble C_ ( 60 ) - methacrylic acid copolymer

  2. 2-10%的丙烯酸、甲基丙烯酸(III)或衣康酸或它们的混合物。

    And 2-10 % acrylic acid , methacrylic acid ( III ), or itaconic acid , or their mixts .

  3. C(60)聚甲基丙烯酸甲脂复合膜的结构、光学和电荷转移特性

    Structural and optical properties and charge transfer study for C_ ( 60 ) - PMMA composite films

  4. N,N-二甲氨基甲基丙烯酸乙酯的原子转移自由基聚合

    Study on the atom transfer radical polymerization of n , n - ( dimethylamino ) ethyl methacrylate

  5. ~(13)cNMR方法研究聚甲基丙烯酸羟乙酯的立构序列分布

    Configuration sequence distribution of poly ( hydroxyethyl methacrylate ) by ~ ( 13 ) c NMR

  6. 甲基丙烯酸甲酯与SBS接枝聚合动力学的研究

    Study on Kinetics of Graft Copolymerization of SBS and Methyl Methacrylate

  7. 原位生成甲基丙烯酸钠补强EVA的研究

    Reinforcement of EVA by sodium methacrylate prepared in situ

  8. 以HTPB为基的聚氨酯(PU)/聚甲基丙烯酸I酯互穿聚合物网络的研究

    Study on HTPB Based PU / PIMA Interpenetrating Polymer Networks

  9. 甲基丙烯酸锌对EPDM的补强作用

    Reinforcement of EPDM with zinc dimethacrylate

  10. 甲基丙烯酸甲酯共聚物作为LIGA抗蚀剂的研究

    Investigation of methyl methacrylate copolymers as the resist in LIGA process

  11. 方法制备了聚(甲基丙烯酸泊洛沙姆)共聚物水凝胶;在不同pH值的介质中研究凝胶溶胀、药物扩散和药物释放性质;

    Method P ( MAA co poloxamer ) copolymer hydrogels were synthesized and the gel swelling , solute diffusivity and drug release properties were investigated in different pH media .

  12. 方法:纯度为99%的川芎嗪单体、甲基丙烯酸甲酯共聚物和聚乙醇酸均匀喷涂于金属裸支架上,制成含川芎嗪200μg的涂层支架。

    Methods : Bare metal stents were uniformly sprayed painting with Tetramethylpyrazine monomer ( 200 μ g )、 methyl methacrylate copolymer and polyglycolic acid , and prepared Tetramethylpyrazine-eluting stents .

  13. 本文采用SiO2纳米粒子作为种子进行了甲基丙烯酸甲酯的乳液聚合。初步探讨了此类种子乳液聚合的过程;

    In this experiment , seed emulsion polymerization of methyl methacrylate was carried out by using SiO 2 nanoparticles as seeds .

  14. 测定了-45.6~60℃范围内由~(60)Coγ射线引发聚合的甲基丙烯酸三丁基锡酯的等规度。

    Poly ( tributyl tin methacrylate ) has been synthesized by low temperature ( -45.6-60 ℃) radiation initiated polymerization . The tacticity and molecular weight of polymers have been measured .

  15. 加入功能性单体甲基丙烯酸(MAA)和丙烯酸(AA)都能使聚合反应的稳定性增强,随着MAA用量的增加,聚合反应稳定性呈先增强后下降的趋势。

    The addition of functional monomer methacrylic acid ( MAA ) was beneficial to the polymerization stability .

  16. 研究了聚丙烯悬浮法接枝甲基丙烯酸β-羟乙酯(HEMA),考察了反应温度、反应时间、HEMA及过氧化苯甲酰(BPO)的浓度对HEMA接枝率的影响。

    The suspension grafting of HEMA onto polypropylene was studied .

  17. 甲基丙烯酸镁对EVM硫化胶性能的影响

    Effect of magnesium methacrylate on properties of EVM vulcanizate

  18. 二氧化碳和丙烯在Cu2(OEt)2/SiO2催化下超临界合成甲基丙烯酸

    Synthesis of Methacrylic Acid from CO_2 and C_3H_6 on Cu_2 ( OEt ) _2 / SiO_2 Catalyst under Supercritical Condition

  19. 甲基丙烯酸封端的复合乳液生成交联型聚合物,PU的硬段和硬段间的氢键也受到破坏。

    While the containing the methacrylic end group is almost fully crosslinked , there is less hard-hard segment of PU hydrogen bond in the hybrid polymer .

  20. 聚[丙烯酸甲酯-甲基丙烯酸2-(二甲氨基)乙酯]/环氧树脂IPN力学性能的研究

    Mechanical Properties of Poly [ Methyl Acrylate-2 - ( Dimethylamino ) ethyl Methacrylate ] / Epoxy Resin IPN

  21. Tbβ2AA与甲基丙烯酸甲酯共聚物的荧光性研究

    Study on the Copolymer of MMA with Tb Complexes

  22. 将甲基丙烯酸甲酯(MMA)、苯乙烯(S)在氯化聚乙烯(CPE)存在下进行悬浮接枝共聚,获得MCS树脂。

    MCS resins can be synthesized by suspension swelling graft copolymerization of methyl methacrylate ( MMA ) and styrene onto chlorinated polyethylene .

  23. 以甲基丙烯酸甲酯(MMA)、甲基丙烯酸丁酯(BMA)为单体,或以其混合物为接枝单体,对聚苯乙烯-聚异戊二烯-聚苯乙烯(SIS)进行接枝共聚制备溶剂型胶粘剂。

    The grafted copolymerization of SIS with MMA and BMA or mixture of both as monomer was carried out .

  24. 聚四氟乙烯(PTFE)膜经Ar低温等离子体预处理,无光引发剂紫外光照接枝甲基丙烯酸缩水甘油酯(GMA)。

    PTFE films were pretreated by low-temperature Ar plasma , then subjected to UV-induced graft polymerization with glycidyl methacrylate ( GMA ) without photo-initiator .

  25. 用模压的方法制备了甲基丙烯酸缩水甘油酯(GMA)改性大豆分离蛋白质(SPI)塑料。

    Glycidyl methacrylate ( GMA ) modified soy protein isolate ( SPI ) plastics were prepared via the compression molding .

  26. 氧气对316L不锈钢表面等离子体聚合甲基丙烯酸丁酯涂层性能及内皮细胞生长行为的影响

    Effects of oxygen on the properties and behavior of endothelia cells of plasma poly n-butyl methacrylate on 316L stainless steel

  27. 本文研究了季铵化甲基丙烯酸二甲胺基乙酯(DM)-丙烯腈(AN)共聚物功能膜的成膜规律和性能。

    Membrane preparation and properties of quaternary copolymer of N , N dimethylamino ethyl methacrylate ( DM ) and acrylonitrile ( AN ) were studied in this paper .

  28. 对氢氧化钠和甲基丙烯酸(MAA)发生中和反应原位生成甲基丙烯酸钠补强乙烯乙酸乙烯酯橡胶(EVA)进行了研究。

    The reinforcement of EVA by the sodium methacrylate prepared in situ from the neutral reaction of sodium hydroxide with MAA was investigated .

  29. TiO2/Na2SO3体系中日光催化聚合甲基丙烯酸甲酯的研究

    Solar photocatalytic polymerization of methyl methacrylate in aqueous medium with tio_2 / na_2so_3 system

  30. 氯丁橡胶(CR)、甲基丙烯酸甲酯(MMA)和丙烯酸(AA)在低毒溶剂中接枝成胶。

    The chloroprene rubber ( CR ) combined with methyl methylallate ( MMA ) and allenoic acid ( AA ) to obtain graft adhesive in low poisonous solvent .