球面反射镜

从而得出离轴球面反射镜所成图像畸变最小。

The conclusion is obtained that the image distortion of off - axis spherical mirror is the least .

提出了球面反射镜的放大自发辐射（ASE）方法测量小信号增益的理论模型，给出了相应的小信号增益系数的计算公式。

The theoretical model of measurement of small signal gain by ASE method with a spherical mirror was presented .

本文针对SiC非球面反射镜的加工特点，介绍了一种集铣磨成型、研磨抛光于一体的非球面复合加工机床的设计过程。

Aiming at the machining features of SiC aspheric mirrors , this dissertation introduces processes to design an aspheric surface compound machine tool with both grinding and polishing .

SiC非球面反射镜因其轻量化程度高，具有很高的光学性能，成为空间反射镜的首选材料。

SiC aspheric mirrors have high lightweight extent and excellent optical performance . Accordingly , SiC turns to be the first of all optical materials which are made for space mirrors .

本文重点介绍了WIDE系统的设计原则和技术指标的确定，以及为保证指标的实现，确定球面反射镜和后投影屏设计、制造和检测指标。

This paper mainly introduces design principles and technology parameters of WIDE System . To Ensure realization of those parameters , criteria for designing , manufacturing and testing of spherical mirror and back projection screen of this system are discussed .

由于软X射线多层膜的反射率还不能像其它波段反射镜反射率那样高，因此由两块同心球面反射镜组成的Schwarzschild物镜在软X射线波段得到了广泛的应用。

The Schwarzschild objective which consists of two concentric mirrors is extensively used in soft X ray range because the reflectivity of multilayers is lower than that in other range .

大相对孔径长波红外广角物镜介绍了一块Φ520mm大相对孔径（F/1.6）轻量化椭球面反射镜的加工与检测方法。

High-Speed Long-Wave Infrared Wide-Angle Objectives The method of manufacturing and testing for an ellipsoid mirror with Φ 520mm diameter are discussed .

采用球面反射镜实现环形腔的本征模式与激光束注入模式的匹配，给出实验装置及偏振光频差测量结果，并通过非线性坐标变换消除了压电陶瓷PZT的非线性对测量结果的影响。

The mode coupling between laser cavity and ring resonator has been realized by using a spherical reflector . The results of frequency difference measurement for the elliptically polarized light and its experimental installation are presented . The nonlinear measuring errors by PZT have been eliminated through nonlinear coordinates transformation .

球面反射镜镜面热变形的数值分析

Numerical analysis for surface deformation of a spherical reflector in thermal environment

非共轴深椭球面反射镜的设计原理

Design of Non - coaxial Ellipsoidal Mirror and its Applications

遥感器球面反射镜蜂窝孔轻量化优化设计

Research of lightweight honey-comb hole structure of spherical reflector of spaceborne sensor

长条型非球面反射镜轻量化及支撑结构优化研究

Study on Lightweight and Optimization of Supporting Structure for the Rectangular Aspherical Reflector

大型非球面反射镜的柔性光学制造技术

The flexible optical manufacturing technologies for large aspheric mirror

粉尘传感器中非球面反射镜的应用与设计

Application and design of aspheric mirror in dust sensor

两叠合的凹球面反射镜成像分析

An analysis of the imaging of two concave spherical reflecting mirrors in superposition

大口径凸非球面反射镜的检测方法

Optical testing method for large convex surface

球面反射镜的放大自发辐射方法测量小信号增益的理论研究

Theoretical Study on Measurement of Small Signal Gain by ASE Method with a Spherical Mirror

它由一组互相垂直的球面反射镜组成。

The microscope consists of two sets of spherical mirrors that scatter in orthogonal planes .

用大口径和大相对孔径的非球面反射镜拍摄一步彩虹全息图

Making one-step rainbow hologram by using an aspherical mirror with large aperture and large relative aperture

用于X光激光实验的离轴球面反射镜线聚焦系统的研究

Study of the off axis spherical mirror line focus system used for X ray laser experiments

非球面反射镜的复制

Reproduction of aspherical mirror

本文给出了计算一般球面反射镜轴对称激光谐振腔场分布的方法。

In this paper , a method is given for calculating field distribution of an axially symmetrical laser resonator .

本文提出了具有三面球面反射镜的复杂环形腔的象散分臂补偿方法。

The article develops an astigmatism compensation method in arm of a complex ring cavity within three spherical reflectors .

讨论了由平面玻璃板与球面反射镜（以下简称球面镜）组成的牛顿环仪观察不到干涉现象的原因；

This paper discusses why the interference phenomena from the Newton 's ring which consist of plain glass and spherical mirror cannot be observed clearly .

实验表明，在可溯源动态校准系统中，由球面反射镜形成的共轭光学系统是满足实验要求的。

The experiments testify that in the traceable dynamic calibration system , the conjugated optic system composed of sphere reflector can satisfy the experiment requirement .

用四球面反射镜曲率中心光学自准方法，通过测量自准像位移来计算弯沉角，是一种高分辨率、准确、简单地测量方法。

The paper describes a high resolution , high accuracy and simple method of measuring dymamic angle by means of optical self-collimating of concave mirror curvature center .

对一个非球面反射镜进行了实测并对测量结果进行插值运算，进而拟合出零件面形的曲线方程。

An aspherical reflector is tested and testing data are processed by the interpolation calculation , then the curve equation of the component surface shape is fitted .

介绍一个有趣的实验现象，计算叠合凹球面反射镜结构参数，并成对像规律进行了分析。

In this article , the structure parameter of two concave spherical reflecting mir - rors in superposition is calculated , and its imaging law is discussed .

第一类是由一块非球面反射镜和分别放置在它的前面和焦点前的两块非球面薄板组成的。

The first type consists of an aspheric mirror and two thin aspheric correcting plates , which are located in front of the mirror and its focus respectively .

通过计算机模拟验证了该加工方法的简便与可靠性，可以降低非球面反射镜加工的设备投入，提高生产效率。

The machining approach is verified to be simple and reliable by computer simulation , so the production efficiency can be improved and the equipment input can be reduced .