热压

提高了高温热压所用的石墨模具材料应具备的基本性能。

Possessed basic properties of graphite die material for high temperature heat pressing were pointed out .

竹材胶合板的研究&Ⅱ.竹材胶合板的热压工艺

A study of bamboo plywood & ⅱ . on the heat pressing technique of bamboo plywood

先驱体转化&热压烧结法制备Cf/SiC复合材料

C_f / SiC Composites Prepared by Precursor Pyrolysis and Hot Pressing

基于PLC的热压机管式加热系统优化控制

The superior control of heating system in hot-press machine based on PLC

燃烧合成-热压制备Al2O3-TiC-ZrO2纳米复合陶瓷的力学性能与显微结构

Mechanical properties and microstructure of al_2o_3-tic-zro_2 nanocomposites prepared by combustion synthesis-hot pressing

反应热压法制备Al2O3/NiCrAl复合材料及功能梯度材料

Al_2O_3 / NiCrAl composites and functional gradient materials fabricated by reactive hot pressing

SiCp/MoSi2原位反应高温热压复合工艺的研究

In-situ Reaction and Hot Press Synthesis of SiC_p / MoSi_2

热压工艺对LCD边框厚度的影响

The Effect on LCD Seal Thickness Caused by Hot Press Technology

反应热压法制备TiB2-Ti（C，N）复相陶瓷研究

Study on tib_2-ti ( c , n ) ceramic composites prepared by reactive hot-pressing

热压法制备Bi2Te3基热电材料的组织与性能

Microstructures and properties of Bi_2Te_3-based thermoelectric materials prepared by hot pressing

热压烧结Ti3SiC2材料的性能

Properties of Ti_3SiC_2 Synthesized by Hot Pressing

热压Pr（Nd）-Fe-B-Cu永磁合金磁性及显微组织

Magnetic Properties and Microstructure of Hot-pressed Pr ( Nd ) - Fe-B-Cu alloys

原位反应热压SiCp/MoSi2复合材料的组织与性能

Microstructure and mechanical properties of SiC_p / MoSi_2 composites prepared by in situ synthesis and hot-pressing

工艺参数对SiC陶瓷热压反应连接强度的影响

Effects of Technological Parameters on the Joining Strength of SiC Ceramic by Hot Pressing Reaction Welding

固态相变-热压烧结制备Ti3Al/TiC+Al2O3陶瓷复合材料

Prepare Ti_3Al / TiC + Al_2O_3 Ceramic Composite by Phase Change in Solid State-Sintering under Hot Press

一种PMMA表面改性的热压键合方法研究

New Method of Layer-to-layer Bonding Technology of PMMA

通过选择合适的烧结制度，利用热压反应烧结成功地制备了Ti3Al/TiC+Al2O3多元复合材料。

With proper sintering processes , Ti3Al / TiC + Al2O3 multi-composites were prepared successfully by hot-pressing reaction sintering .

高能球磨与热压烧结制备TiAl基合金

Preparation of TiAl-based Alloys by High-energy Ball-milling and Hot-pressing Sintering

热压Al2O3-ZrO2（6mol%Y2O3）陶瓷复合材料的组织性能研究

Microstructure and Mechanical Properties of Hot-Pressed Al_2O_3-ZrO_2 ( 6mol % Y_2O_3 ) Ceramic Composite

当Al2O3颗粒含量小于20%时，热压使强度升高，塑性下降；

When Al_2O_3 particles content is less than 20 percent , hot pressing will strengthen the intensity and weaken the plasticity .

热压烧结可以大大提高SiC/Cu–Al复合材料的致密度，最高达到理论密度的99.9%。

The density of SiC / Cu – Al composites prepared by hot pressing can be improved and reach 99.9 % of theoretical density .

超细石英粉经热压成型（HP）制成红外陶瓷材料，工艺简单，原料成本低。

Infrared ceramics material is prepared using HP ultrafine quartz powder in a simple process and at low cost .

热压ZrO2陶瓷应力诱导相变是从G相转变为单斜相。

The stress-induced phase transformation in the hot-pressed zirconia ceramics is from the G phase to monoclinic phase .

塑料（PMMA）微流控芯片微通道热压成形工艺参数的确定

Process Parameter Determination in Fabrication of Microchannel of Plastic ( PMMA ) Microfluidic Chips Using Hot-embossing Method

纳米Ni-Al2O3金属陶瓷粉末热压致密化过程

Hot pressing densification process for nano Ni-Al_2O_3 powders

将纯Al，Ti，B粉进行真空热压反应烧结，成功地制备了原位生长TiB2增强Al复合材料。

The in situ forming TiB_2 reinforced AI composite was favourably prepared by reaction-sintering of pure AI , Ti and B powders under vacuum .

研究了热压扩散结合工艺对B／Al复合材料的强度的影响，并对试样拉伸断口及断裂路径进行了研究。

The influence of hot-pressing-bonding technique on B / Al composite strength was studied , and the microstructures in crack section of specimens as well as crack pathes were investigated .

纳米复合WC-Co粉末的热压烧结

Study on the Hot Press Sintering of Nanocomposite WC-Co Powder

结果表明：热压贴合成型PVC高填充地砖的加工技术可行，利用废PVC农膜生产PVC地砖基片，降低了产品成本，具有可推广性。

The results showed that the processing technology of filled PVC floor tile by hot pressing laminate moulding was practical and could be popularized .

利用PVT分析仪测定PS的热膨胀系数、等温压缩系数和热压系数

Measurements of Thermal Expansion coefficient Isothermal Compression Coefficient and Thermal Pressure Coefficient of Polystyrene with PVT Analyzer