烧结机理

讨论分析了AlPb合金轴瓦材料的烧结机理。

The sintering mechanism of Al Pb bearing alloy was discussed .

从热力学计算分析H2气氛下Cr2O3的烧结机理

Analysis the Sintering Mechanism of Cr_2O_3 at Hydrogen Atmosphere from Thermodynamic Calculation

金刚石颗粒-金属粉末的CO2激光烧结机理研究

Study on CO_2 laser sintering for the mixture of metallic powder and diamond grits

Al2O3/3Y-TZP复相陶瓷的液相烧结机理

Mechanism of liquid phase sintering for Al_2O_3 / 3Y-TZP composite

同时对SiC的液相烧结机理也进行了探索。

The liquid-phase sintering mechanisms of SiC were also studied .

ZnCr2O4-SnO2陶瓷湿敏材料烧结机理的探讨

On Sintering Mechanism of Humidity-Sensitive Ceramic ZnCr_2O_4-SnO_2

烧结机理为SPS低温液相烧结。

The sintering mechanism is found to be liquid phase sintering .

作者采用粉末冶金方法，通过X－ray衍射谱、SEM观察等大量实验，研究了钢基－Al2O3金属陶瓷复合材料的烧结机理。

The method of powder metallurgy is applied to Fe-Al2O3 cermet composites by X-ray diffraction spectrum , SEM observation , etc.

α-Al2O3的恒速无压烧结机理研究

The Investigation on the Sintering Mechanism for α - Al_2O_3 under the Pressureless Sintering Condition at Constant Heating Rates

应用SEM方法观察了MgO与ZrSiO4的反应烧结机理。

The reaction sintering mechanism of MgO and ZrSiO_4 was observed by SEM .

着重讨论了SiC粉体的分散性、悬浮体的流变性、沉降行为以及烧结机理。

The dispersivity of SiC powder , the rheological property of the suspension , sedimentation behavior and the sintered mechanism of R-SiC were discussed .

CaO-B2O3-SiO2系微晶玻璃的低温烧结机理

Study on the Low Temperature Sintering Mechanism of the Glass Ceramics in CaO-B_2O_3-SiO_2 System

ZAO靶材烧结机理与特征的研究

Research on basic sintering processes of ZAO target

研究了在热压条件下制备（SiC，TiB2）/B4C复合材料的烧结机理。

The sintering mechanism was investigated for ( SiC , TiB_2 ) / B_4 C matrix composites fabricated under hot pressing conditions .

Fe-Ti合金的液相烧结机理及性能的研究

A study on liquid sintering mechanism and properties of Fe-Ti alloy

推断了试样MD、DH和MDH的初期烧结机理，计算了其表观活化能。

The mechanism for the initial sintering stage of specimens MD , DH and MDH was postulated and the activation energy calculated .

结合传统粉末烧结机理和热塑性塑料SLS成型特征，研究了尼龙材料选区激光烧结快速成型机理；

The prototyping mechanism of rapid prototyping of PA during the SLS process is studied by combining with traditional powder sintering mechanism and SLS fabrication characterization of thermoplastic .

运用本模型，成功的解释了ZAO的显微结构形成的烧结机理。

Based on the study , a sintering model for two phase powder was produced , which successfully explained the sintering mechanism of forming ZAO microstructure .

比较了97瓷与钛刚玉瓷中不同添加剂对烧结机理的影响，并采用XRD、SEM和EDS等方法研究了两种陶瓷的显微结构。

The effects of different additions upon sintering mechanism in 97 ceramics and titanium corundum ceramics have been compared , and the microstructure of two ceramics has been studied by means of XRd , SEM and EDS.

单相陶瓷材料SHS／QP超快速烧结机理：SHS反应后热量来不及散失，试样处于半固态。

The mechanism of sinter single-phase ceramic by SHS / QP is : after SHS the product is in a state of semi-solid because of the extra high combustion temperature .

研究了SiCp/Fe金属基复合材料的界面反应和烧结机理，并分析了工艺参数对材料性能的影响。

The interface reaction and sintering mechanisms of a new SiC p / Fe metal matrix composite ( MMC ) have been studied . The effects of the manufacturing process and its technological parameters on the properties of the material were analyzed .

利用TG、DTA、DDTA等分析手段研究Bi2O3的低温烧结机理，并确定最佳烧结温度范围在840～900℃之间。

The mechanism of low temperature sintering is discussed by means of TG , DTA and DDTA , and the optimum sintering temperature range is between 850 ~ 900 ℃ .

研究了添加V2O5的NiFe2O4尖晶石样品的烧结机理、导电性、腐蚀性。

The sintering mechanism , electrical conductivity and corrosion of the NiFe_2O_4 spinel sample with the addition of V_2O_ ( 5 ) were investigated .

介绍了一种新型的Al／Al2O3陶瓷基复合材料，讨论了该材料的烧结机理及界面结合性能，并分析了一些主要工艺因素对材料性能的影响。

In this paper , a new Al / Al2O3 Ceramic Matrix Composite ( CMC ) was introduced . The sintering mechanism and interface property of the material were also discussed . Moreover , the effect on the materials properties by some main factors of technology was analyzed .

SHS／QP技术制备陶瓷及陶瓷基复合材料耗时短（＜5min），产物密度接近理论密度，用传统的扩散烧结机理很难解释，预示着不同的烧结机理。

The relative density of ceramic composites fabricate by SHS / QP in few minutes was nearly theoretical , which is hard to explain by traditional diffuse sintering theory and indicates a new sintering mechanism .

通过对PFW结晶化学和烧结机理的分析，证明在PZN中添加PFW能减少或抑制焦录石的形成。

Through an analysis of crystal chemistry and sintered mechanism for PFW . it has been shown that addition of PFW to PZN can decreases or suppresses the formation of pyrochlore phase .

硅藻土超轻陶粒制备及其烧结机理

Preparation of Super-light Ceramic Granule from Diatomite and Its Sintering Mechanism

纳米氧化锆陶瓷烧结机理及模拟计算

Study of Sintering Mechanism and Analog Calculation of Nano Zirconia Ceramics

讨论了该材料的烧结机理，研究了烧结气氛对该材料性能的影响。

The sintered mechanism of the material is discussed , too .

陶瓷材料SHS/QP超快速烧结机理研究

Mechanism of Superfast Sintering of Ceramic Composites by SHS / QP Process