烧结普通砖

利用金尾矿生产烧结普通砖的研究

Exploitation of the Use of Gold Tailings to Manufacture Fired Common Brick

使用非标准烧结普通砖的危害及防止措施

The fault of using nonstandard fired common brick and its prevention measures

烧结普通砖检测试验中的结果分析

The Analysis of Abnormal Test Results on Fired Common Bricks Test

浅析烧结普通砖外观缺陷

Analysis of Appearance Defects of Fired Common Brick

回弹法现场检测既有砌体结构中烧结普通砖的强度

In Situ Inspection of Strength for Fired Common Brick in Existing Masonry Structures Using Rebound Method

烧结普通砖标准GB5101&93应用中存在的问题及改进意见

Questions Existed in Application of 《 Common Fired Bricks 》 Standard GB 5101-93 and Improvement Opinions

新疆地区蒸压粉煤灰砖替换烧结普通砖的若干问题探讨

Discussion on several problems of autoclaved fly ash brick as substitutes of fired brick in Xinjiang

本实用新型公开了一种烧结普通砖抗压试件成型器。

The utility model discloses an anti-pressure sample shaping machine for sintered ordinary brisk , which includes a base-board and a top-board .

针对直接利用回弹测强公式测定砌体结构中烧结普通砖强度的可行性问题，通过试验分别探讨了砌筑砂浆和竖向压力对砌体结构中的烧结普通砖采用回弹测强公式测强的影响。

To the feasible problem of using rebound formulas determining clay blocks ' strength in masonry structures , and the influences of mortar and vertical stress is discussed .

制品性能达到GB/T5101&1998《烧结普通砖》的要求，烧成温度比一般烧结普通砖约降低100℃。

The product can meet the requirements of Chinese Standard GB / T 5101-1998 " Sintered Common Brick " while the sintered temperature is lower than general sintered brick about 100 ° C.

试验结果表明：砌筑砂浆和竖向压力对砌体中烧结普通砖直接采用回弹测强公式的影响很小，可以不予考虑，而直接采用回弹测强公式计算砌体结构中烧结普通砖的抗压强度。

The results of the tests show that their influences can be neglected , and it is feasible that the compressive strength of clay blocks in masonry structures are determined by rebound formula .

传统的烧结普通砖以牺牲优质黏土资源和破坏生态环境为代价，严重妨害可持续发展和人与自然和谐相处。

The traditional sintering ordinary brick to sacrifice the quality clay resources and damage the ecological environment as the price , serious disrupt the sustainable development and the harmony between human and nature .

在汶川地震中，由于砌体结构抗震抗剪能力差，整体受损严重，然而多孔砖砌体较烧结普通砖砌体呈现更大的脆性破坏且修复、加固更加困难。

However , in wenchuan earthquake , because masonry structure seismic shear capacity was poor , so the overall was severely damaged . And porous brick masonry is more brittle failure , repair and reinforcement is more difficult than sintering ordinary brick masonry .

介绍直接采用粘土砖生产的一般工艺，生产高掺量粉煤灰烧结轻质承重普通砖所进行的尝试。

It recommends the flyash load bearing brick production technology with high proportion mix of flyash .

烧结（垃圾）普通砖的孔结构及其作用

The Pore Structure and Effect of Fired Common Garbage Bricks

制得的烧结砖能满足国家标准《烧结普通砖》（GB5101-2003）的相关要求，并且能从一定程度上提高砖体的隔热保温性能。

The brick can be obtained to meet the national standard , " Bricks " ( GB5101-2003 ) of the relevant requirements , and to some extent it also improved the capability of heatproof .