混流泵

  • 网络mixed-flow pump;mixed flow pump;mixed-flowpump
混流泵混流泵
  1. 高比转数混流泵叶轮水力设计CAD系统的研究

    Hydraulic Design for Impeller of High Specific Speed Mixed-flow Pump and CAD System 's Research

  2. 喷水推进混流泵流体动力性能的CFD研究

    Hydrodynamic Performance of the Jet Propulsion Mixed-flow Pump by CFD Simulation

  3. 离心泵、混流泵叶轮水力CAD(Windows)软件的开发

    Development of the hydraulic CAD ( Windows ) for Centrifugal and Mixed-Flow Pumps

  4. 混流泵叶轮内部流动的PIV实验

    Experimental Study on the Flow in Mixed Pump Impeller by PIV

  5. 基于Bezier函数的混流泵叶片造型研究

    Study on Surface Modeling of the Blade of Mixed-flow Pump Based on Bezier Function

  6. 液压控制系统在小型喷水推进装置中的应用喷水推进混流泵流体动力性能的CFD研究

    The Application of Hydraulic Control Systems on Low Power Waterjet Hydrodynamic Performance of the Jet Propulsion Mixed-flow Pump by CFD Simulation

  7. 等环量流型高比转速混流泵内部流场数值模拟电站锅炉应用等速型低NOX燃烧器的数值模拟

    Numerical Simulation of Interior Flow for High Specific Speed Mixed-flow Pump Designed by Constant Circulation flow Pattern Numerical simulation of low NO_X pulverized-coal burners in same velocity of two channels in utility boilers

  8. 基于二元理论,用FORTRAN语言编程实现了高比转速混流泵叶轮的水力设计。

    Based on the two-dimension theory , a computer code is made in FORTRAN language to design the high specific speed mixed-flow pump .

  9. 以速度矩Vur为控制变量,通过正反问题迭代计算从而构制出叶片,力求使叶轮叶片形状与叶轮内实际流态相吻合,从而得到性能优异的混流泵。

    With velocity moment V_ur as the command variable , the shape of blade is developed by iterating computation of positive and inverse question , which ensures full coincidence of blade shape with real flow status through the impeller and creation of a mixed-flow pump with good performance .

  10. 混流泵启动过程汽蚀性能的试验研究

    Experimental Study on Cavitation Characteristics of a Mixed-flow-pump during Starting Period

  11. 混流泵叶轮二元设计方法的研究

    A Study of Two-dimensional Designing Method for Mixed Flow Pump Impeller

  12. 大型导叶式混流泵叶片的数控加工工艺

    NC machining process of large guide vane of mixed flow pump

  13. 导叶式混流泵叶片三坐标测量分析

    Analysis of Three Dimensional Measurement of Guide Vane Mixed Flow Pump

  14. 立式轴流、混流泵用陶瓷轴承

    Introduction of Porcelain Bearing Used in Vertical Axial and Mixed-flow Pump

  15. 混流泵停机过程的瞬态水力特性分析研究

    Analysis on Transient Performance of Mixed Flow Pump During Stopping Period

  16. 粉末涂料的流平问题混流泵的性能预测

    Levelling of Powder Coatings Performance Prediction for the Mixed Flow Pump

  17. GB/T13006-1991离心泵、混流泵和轴流泵汽蚀余量

    " NPSH for centrifugal , mixed flow and axial pumps "

  18. 前置式自吸混流泵的开发与研制

    The Development and Study of Prepositioned Self-priming Mixed Flow Pumps

  19. 反问题与神经网络相结合的混流泵叶片优化设计

    Blade Optimization of Mixed-Flow Pump Using Inverse Design Method and Neural Network

  20. 混流泵内流场的数值模拟

    Numerical Simulation of Interior Flow Field of Mixing Flow Pump

  21. 混流泵叶轮切割规律的试验研究

    Experiment and Research of Incision Law on the Impeller of Circulating Pump

  22. 混流泵三维势流与边界层迭代计算

    Iterative Computation for a 3-D Potential Flow-Boundary Layer in a Mixed-Flow Pump

  23. 混流泵叶片角对泵性能的影响

    Influence of the Blade Angle of Mixed-flow Pump on the Pump Function

  24. 高比转速混流泵叶轮设计方法

    Design method for impeller of high specific speed mixed-flow pump

  25. 以及YH&400型移动式液压潜水混流泵的具体设计过程和步骤;

    We demonstrate design procedures of YH & 400 moveable pumping station .

  26. 混流泵叶轮的正反问题迭代设计

    Design of mixed flow pump impeller by using direct inverse problem iteration

  27. 混流泵叶轮奇点法水力设计

    Hydraulic design of mixed-flow pump impeller by singularity method

  28. 液压调速器液压调节器装在泵上的机械调速器可调叶片高比转速混流泵内部流场数值模拟

    Numerical simulation for adjustable high specific speed mixed-flow pump

  29. 联体立式混流泵在抽水泵站中的应用

    Application of integral vertical process pumps in pump stations

  30. 可调导叶式混流泵主要设计要素的确定

    Determination of primary design factor for adjustable mixed flow pump with guide blades