气路

电路、气路、油路及其连接的部件设置合理、结构紧凑、操作方便、便于检修。

The circuit , the gas circuit , the oil circuit and components connected therewith have the advantages of reasonable setting , compact structure , convenient operation and convenient inspection .

列尾主机自动检测台气路控制方法探讨

Designing gas circuit control system of auto-detection platform for train teal host

PLC在差压铸造设备气路控制系统中的应用

Application of PLC on Pneumatic Control System for Differential-gravity Casting Equipment

涡扇发动机气路故障定量诊断的BP网络研究

Fault quantitative diagnosis of turbofan gas path component by BPN

基于MATLAB的背压气路特性曲线分析

Analysis of the Characteristic Curve in the Backpressure Gas Path Based on MATLAB

结合反吹外切技术优化改造分析气路，实现N2O的连续测定；

With back-flush and separately sweeping technique to achieve continuous analyse of N2O ;

在此基础上，采用多气路输送不同金属有机源的方法，进行了ZnO晶须的掺杂，制备了掺铝元素的一维定向晶须阵列。

Multi-gas pipelines were used to transport different metal organic compounds to prepare Al doped ZnO whiskers .

介绍了ShimadzuICPV＿1012型等离子体光谱仪的RF发生器、气路控制和计算机故障的排除方法。

Trouble_shooting methods for RF generator , gas controller and computer system of Shimadzu ICPV_1012 plasma spectrometer were discussed in this paper .

AOD炉气路检测与控制系统的选择

The Selection of Monitoring and Controlling System on Gas Pipe Lines of AOD Furnace

根据塑料中空吹瓶机的生产工艺，通过PLC硬件配置及编程，设计了塑料中空吹瓶机的气路系统和顺序控制系统。

The gas-way system and sequence control system of plastic bottle-blower are designed on the basis of the productive technology . The allocation of PLC and program design are completed .

分析了造成CS800型C、S分析仪分析时间过长的原因：如氧气的纯度、转化炉的工作效率、气路等；并找到了相应的解决方法。

The reasons for the long-time response of CS 800 carbon and sulfur analyzer were analyzed on the purity of oxygen , work efficiency of catalyst furnace , gas way , and the solutions were suggested .

介绍了烟丝喂入的工作过程，对于该系统的气路系统、PLC输入和输出接线以及软件设计进行了论述。

The working process of cut tobacco feeding , the air circuit and software ( design ) of the control system , the input and output connections of PLC were introduced .

所设计的气路转换系统和同心石英等离子体炬管等，使扫描式分子气体ICP光谱仪既可用于分子气体ICP放电，又可用于氩ICP放电。

The designed quartz concentric torch and the gaseous transfer system are suitable for both argon ICP discharge and the molecular gases ICP discharges .

BPN在涡扇发动机气路故障诊断中的应用

Application of BPN to quantitative diagnosis of gas path component faults in turbofan

我们对压力式气路进行分析，用MATLAB软件对测量曲线进行仿真，得到工作压力、节流孔和喷嘴孔径三个参数对测量曲线的影响。

Under the help of the analysis about the pressure gas way we got the influence result from the three parameters of work pressure and nozzle diameter Orifice separately by simulation of the measurement curve using MATLAB software .

分析研究了放电功率密度对臭氧浓度的影响，并通过实验研究了改变沿气路方向放电功率密度的均匀性对DBD等离子体合成臭氧的影响。

Influences of discharge power density are analyzed and discussed , and the impacts of inhomogeneous power density on ozone generation are studied experimentally .

简要介绍了北京海光仪器公司生产的AFS＿2201型双道原子荧光光度计中的气路控制、温度控制和空心阴极灯电源的电路原理、常见故障及排除方法。

In this paper , design principle , common troubles and trouble_shooting methods for gas and temperature control system , HCL power supplier in AFS_2201 double_channel atomic fluorescence spectrometer were described .

研究表明利用CFD技术结合具体工程对流场进行仿真，能够有效的对清扫车虚拟样机气路系统进行优化分析。

It is shown that application of CFD on the flow field simulation , associating with the engineering specific , is effective on simulation analyses and structure optimizations in the design of gas system of highway mechanical sweeper .

KZ-28型可控震源的气路在冬季施工过程中常出现洁冰现象。

The air passage of KZ-28 vibroseis appeared icing phenomenon in winter operation .

TC-136氧/氮仪分析气路的改进

Improvement in Analytic Gas Way of TC-136 O-N Meter

介绍了汽车起重机气路系统的贮气筒采用弧焊机器人自动焊接的工艺过程，着重介绍了配套的焊接变位机的总体结构与PC控制系统。

The automatic welding process to weld the air reservoir for pneumatic system of crane truck using the arc welding robot was presented in this paper , with emphases on the description of the general structure of the ancillary welding positioner and the PC control system .

根据清洗要求及实际工作需要，设计了本清洗机的气路控制系统以及PIC控制系统，并且根据清洗要求制定了清洗流程。

The cleaning machine has been put into production now . ( 4 ) We design the pneumatic control system and PLC control system according to the cleaning requirements and actual need of work and make the cleaning process .

在分析过程中，该方法采用恒定色谱柱温操作，通过改变六通阀的位置，依次将色谱柱1（GDX-101）和色谱柱2（TDX-01）切换到气路系统中。

Two chromatographic columns can be switched in the gas way by changing the positions of the six-way valve .

该装置由气路管道系统、传感检测系统和智能控制等部分构成，不仅能够实现在局部封闭空间中模拟低浓度SO2污染的大气环境，并具有操作性强和可靠性高的优点。

This device consists of gas pipeline system , sensor detection systems and intelligent control system , then we can simulate low concentration of SO2 pollution in the micro-environment with the use of the device , and it has the maneuverability and high reliability properties .

第三章简要介绍色谱仪的硬件系统，包括电路系统和分析气路系统，重点介绍了色谱仪的处理核心&嵌入式计算机PC104。

In the third chapter , the dissertation introduces the hardware system of chromatograph , including electric system and gas route , PC 104 embedded computer , the data processing kernel .

结论RICU内机械通气患者应在48小时至7天，依据气路管道的污染情况及时更换循环管路，下呼吸道感染与气路管道污染的细菌具有相关性。

Conclusion The breathing circuit of the patients with mechanical ventilation in RICU should be changed timely according to the degree of pollution from 48 hours to 7 days . The pathogens of lower respiratory tract infection have relativity with those of breathing circuit pollution .

文中介绍了基于8752单片机和美国FOXBORO公司微差压变送器研制的高精度中压型智能测漏仪，论述了其工作原理、气路结构、硬件电路设计及系充软件设计。

This paper introduces tte working principle , the pneumatic connection , the hardware circuit and the system software design of the High Precision Mid-Pressure Intelligent Air Leakage Tester , based on 8752 single chip microcomputer and the differential pressure transmitter produced by FOXBORO Co. of America .

气路控制系统在混凝土搅拌站上的应用

Application of the pneumatic control system in the concrete mixing station

发动机试车气路故障诊断系统的设计与应用

Design and application of engine test gas path fault diagnosis system

两位式控制阀的控制气路改进

Improving the Air Passage on an ON - OFF Control Valve