智能传感器

一种改进的智能传感器数据融合方法

An Improved Intelligence Sensor Data fusion Method

针对矿井的特殊环境和CAN总线的系统结构特点，设计了适合煤矿监控系统的CAN接口适配卡、智能传感器节点、最小系统节点的硬件结构。

The paper introduces the CAN Bus interface card , intelligence sensor node and minimum system node hardware structure designed for monitor system of special environment of underground mines based on system structure of CAN Bus .

IDEA加密算法在智能传感器中的应用

International Data Encryption Algorithm in Intelligent Sensor Applied

智能传感器中的Java机虚拟运行环境

Virtual Running Environment of Java Machine in Smart Sensor

基于DSP自动更新的无线智能传感器系统设计

Self-updata and Wireless Intelligent Sensor System Design Based on DSP

智能传感器用USB接口的开发

Development of USB interface by use of intelligent sensors

基于MEMS技术的复合型智能传感器设计

Design of compound and intelligent sensor based on MEMS technology

列车车厢内火灾报警智能传感器的SoC设计

SoC Design of Intelligent Sensor Used for Train Fire Alarm

基于Z元件的数字化智能传感器的设计与实现

Digital Intelligent Sensor Based on Z-elements

文中最后还给出了一个利用ISP技术设计智能传感器接口模块的实例。

Finally it also supplies an design example of intelligent sensor interface module applied ISP technique .

系统包括智能传感器、GPRS数据传输终端、传输系统和监控中心四部分组成。

The system contains four parts , including intelligent sensor , GPRS data transmission terminal equipment , transmission system and monitoring center .

一种让驾驶员保持警觉（甚至在自动驾驶状态下）的办法，是在车内应用追踪眼睛和头部动作的智能传感器，通用汽车（GeneralMotors）正在研究这项技术。

One way of keeping the driver alert even in autonomous mode is to use eye and head-tracking smart sensors in the cabin , something being worked on by General Motors .

以涡轮后燃气温度T4智能传感器为研究对象，进行了分布式统计判决仿真，并与最优中心决策以及最优似然比决策作了对比分析。

Taking the low pressure turbine outlet temperature T4 smart sensor as the object , simulations have been done .

多个矿用智能传感器通过CAN-bus可方便的接入矿用监测分站，组成井下监控系统。

Intelligent sensors by more than mine CAN-bus can easily access mine monitoring station to form the underground monitoring system . 4 .

比较IEEE1451.2和UART，基于蓝牙技术的无线智能传感器网络采用UART模式。

Comparing IEEE 1451.2 with UART interface , the sensor network uses UART interface to intergrate bluetooth module with intelligent sensor .

通过对数字通信差错控制编码技术的具体分析，提出了适合智能传感器与微机数据无线传输的CRC码差错检测方法。

By the introduction of Error-control Coding Technique in detail , a method called CRC error detect code that suits in non-wire data transportation among personal is presented .

基于PROFIBUS-PA总线的智能传感器设计

Design of Smart Sensors Based on PROFIBUS-PA

采用以DSP为核心的信号采集与信息处理技术，结合现代智能传感器技术的设计理念，设计了具有广泛适应性的移动机器人智能信号采集处理模块。

Based on the signal acquisition and processing technology of digital signal system ( DSP ), combined with modern design conception of intelligent sensor technique , we design a signal acquisition and processing module which can be widely used in mobile robot .

Internet的飞速发展和智能传感器技术的进步，将Internet技术与智能传感器技术相结合，使传感器在现场级就具有基于TCP/IP协议的通信功能，这是传感器重要的发展方向之一。

With the improvement of Internet and sensor techniques , it is an important tendency to combine the smart transducer technology with the Internet technology to develop the next generation of sensors , which enables the sensors to own the ability of TCP / IP-based communication at the device level .

其系统软件包括上位机应用程序、嵌入智能传感器模块的MCU程序、蓝牙模块HCI固件程序，及上位机、MCU与HCI间的通讯程序。

The system software includes application program in PC , the MCU program in of embedded intelligent sensor module , HCI firmware of bluetooth module and communication program among PC , MCU and HCI .

另外，IEEE1451标准把智能传感器划分为STIM和NCAP两个模块，必要性不强。

In addition , IEEE 1451 standard divides smart sensor into STIM and NCAP parts , this is not really necessary .

把传感器硬件冗余技术、BP网络以及串并联Elman递归神经网络结合起来，提出了一种新方法用于构造具有传感器故障检测、分离且具有冗余能力的智能传感器系统。

Combining the hardware redundant technology with BP neural network and Elman recurrent neural network , the paper presents a new method for constructing an intelligent sensor system with abilities of sensor fault detection , fault isolation and redundancy .

提出了矿用智能传感器的嵌入式软件的实现方式，分析了软件主要实现的功能和具体的流程，重点研究了对CAN-bus接口的驱动做了重点的分析。

Proposed mine smart sensors embedded software implementations , the main realization of the software features and specific processes , focus on the CAN-bus interface , on the driving focus of the analysis done . 6 .

智能传感器接口模块（STIM）包括传感器接口电路，信号调理和转换，标定，线性化，基本通信能力和电子数据表格。

The smart transducer interface module ( STIM ) contains the sensor interface electronics , signal conditioning and conversion , calibration , linearization , basic communication capability , and an electronic data sheet .

文章详细分析了现代雷达系统对新一代雷达测试系统的要求，分别从MC3一体化技术、虚拟仪器技术、网络测试技术以及智能传感器信息处理技术四个方面对新一代雷达测试系统进行了展望。

This paper analysis the requirement of modern radar system in new radar measurement system and the prospect of new radar measurement system in application of MC ~ 3 technology , virtual instrument technology , networked measurement technology and intellectual sensor technology .

神经网络技术在智能传感器系统中的应用与发展

Application and Development of Neural Network Technology in Intelligent Transducer System

基于IEEE1451的无线网络化智能传感器探讨

Research on Wireless Networked Smart Sensor Based on IEEE 1451 Standard

提出了一种采用智能传感器进行电流真有效值测量的系统设计方案。

A smart sensor to measure real RMS current is presented .

智能传感器系统多路混合开关电源设计与实现

Design of Multi-way Composite Switching Power Supply for Intelligent Sensor System

多参数网络化智能传感器阵列技术研究

Research on Technology of Intelligent Network Sensor Array with Excessive Parameters