新型陶瓷材料

本文论述了新型陶瓷材料的范围、种类和特性，以及新型陶瓷微粉填充聚合物后，赋予纤维材料功能性的研究与开发。

This article deals with the range , kind and properties of new ceramic materials , and the study and develop-ment on the materials to render fibre a specific function after they are filled with polymer .

尤其对高可靠、高密度多层陶瓷封装技术以及新型陶瓷材料作了详细评述，并对今后我所封装方面的研制、开发工作提出了建议和设想。

Especially , the technology of high reliability , high density multilayer ceramic package and new ceramic materials are reviewed . In addition , the author also offers some suggestions on the future packaging development in our institute .

新型陶瓷材料Ti3SiC2制备技术的研究进展

Research progress of the synthesis of the new ceramic Ti_3SiC_2

LiCoVO4新型陶瓷材料的ChimieDouce法合成及其价键振动研究

Study on chimie-douce-method synthesis and vibration modes of novel ceramic material licovo_4

本文对近几年来等离子体原子发射光谱（ICP-AES）和等离子体质谱（ICP-MS）在新型陶瓷材料分析中的应用进行了评述，讨论了应用ICP-AES/MS技术测定陶瓷材料中痕量杂质的各种进样技术。

A review on the analysis of advanced ceramic materials by ICP AES / MS were presented . The sample introduction techniques of ICP AES / MS in the determination of trace impurities in advanced ceramic materials were also discussed .

热力学参数状态图在新型陶瓷材料中的应用实例

The Application Examples of Thermodynamic Phase Diagram in New Ceramic

正交试验法在新型陶瓷材料研究中的应用

The Application of the Cross Experiment Design in Studying the Advanced Ceramic Materials

新型陶瓷材料&钛酸铝的分析方法探讨

A Discussion on Analysis Method for Aluminum Titanate

新型陶瓷材料的动力学研究

The kinetic studies on new-type ceramic materials

随着新型陶瓷材料在工程上的广泛应用，为工程陶瓷的珩磨加工提出了许多新的研究课题。

The application of advanced ceramics in industry proposes new research work for ceramic honing .

感耦等离子体发射光谱/质谱分析新型陶瓷材料研究进展

The Application of Inductively Coupled Plasma Atomic Emission Spectrometry / Mass Spectrometry to the Analysis of Advanced Ceramic Materials

新型陶瓷材料的发展将在今后十年和21世纪对世界工业和社会进步产生很大影响。

The development of advanced ceramics will effect remarkably on industrial and societal towards this decade and the21st century in the world .

并且，这种新型陶瓷材料还具有很好的抗热震性能，可在大范围温度波动下被迅速加热或冷却。

The new ceramic compound is very resistant to thermal shock and can withstand rapid heating or cooling at wide temperature fluctuations .

微晶陶瓷是由玻璃原位析晶而获得的一种结构均匀、致密，晶粒尺寸为纳米或亚微米级的高技术新型陶瓷材料。

Glass-ceramics is a high-technology and novel ceramic materials with homogeneous and dense microstructure and nano-or submicro-crystals , attained by in-situ crystallization in glass .

红外泡沫陶瓷是一种用途广泛的新型陶瓷材料，它的研究和开发，对红外加热技术有重要的意义。

Infrared foamed ceramics is a new and usefull ceramic material . The research and development of this material are of significance for infrared heating techique .

支撑熔盐膜由一种新型陶瓷材料（偏铝酸锂）和锂、钠、钾的三元最低共熔点混合物制成。

Supported molten salt membrane is made from a new kind of ceramic material ( lithium meta-aluminate ) and ternary eutectic mixture of lithium , sodium and potassium carbonates .

结论：由于氧化铝玻璃复合体的强度和断裂韧性是目前牙科瓷的两到三倍，因而，它是一种极有前途的、制作牙科冠桥的新型陶瓷材料。

Conclusion : Alumina glass composite is a new promising ceramics for fabricated dental crowns and bridges , because their strength and fracture toughness are 2 ~ 3 times stronger than those of current dental ceramics .

Cf/SiC复合材料是一种具有广阔应用前景的新型陶瓷制动材料。

C_f / SiC has the broad application prospect when it as a new kind of braking material .

利用TEM和电子衍射图谱分析，研究了新型陶瓷刀具材料JX－2－I的界面微观结构。

Interfacial Microstructure of advanced ceramic tool material JX-2-I have been studied with TEM and elec-tron diffraction spectrum .

研究了Al2O3/SiC/（W，Ti）C新型陶瓷刀具材料在切削铸铁时的耐磨性能。

S : Anti_abrasion performance of a new Al 2O 3 / SiC / ( W , Ti ) C ceramic tool material when cutting cast iron is researched .

研制出一种稀土补强Al2O3/（W，Ti）C新型陶瓷刀具材料，并对其增韧补强机制作了研究。

An advanced Al2O3 / ( W , Ti ) C composite ceramic tool material reinforced by rare earth elements is developed , and the toughening and strengthening mechanisms are analyzed .

热压工艺参数对纳米SiC-Al2O3/TiC新型陶瓷刀具材料力学性能的影响

The effect of hot pressing parameters on mechanical properties of nano sic-al_2o_3 / tic

热解氮化硼（PyrolyticBoronNitride，简称PBN）是七十年代发展起来的新型无机陶瓷材料。

Pyrolytic Boron Nitride ( PBN ) is a new inorganic ceramic material developed during 1970s . It can be used to make insulating shield and crucible . This paper describes the use of PBN as a crucible in MBE .

本文研制成功的新型陶瓷刀具材料&SiC晶须（SiCw）增韧和SiC颗粒弥散增韧Al2O3陶瓷刀具Jx－2－I，该刀具材料具有高的抗弯强度和断裂韧性等优点；

? An advanced ceramic tool material Jx-2-I has been developed by means of silicon carbide whisker ( SiCw ) reinforcement and silicon carbide particle ( SiCp ) dispersion alumina . The material has the advantage of high bending strength and fracture toughness .

新型陶瓷刀具材料JX－2－I界面结构的实验研究

Study on the Interfacial Microstructure of Advanced Ceramic Tool Material JX-2-I

新型陶瓷刀具材料及其发展前景

New types of ceramic cutting tools and its development prospect

新型陶瓷刀具材料的热应力分析

Thermal Stress Analysis of Newly Functionally Graded Ceramic Cutting Tools

新型陶瓷蓄热材料的开发研究

Exploit and Research on the New type Ceramic Regenerative Material

新型陶瓷刀具材料JX－2－Ⅰ界面扩散研究

Study on the Interface Diffusion of Advanced Ceramic Tool Material JX-2 - ⅰ

新型加工陶瓷材料的微波加热系统

A New Microwave Heating System for Processing of Ceramics