控制材料

金属铪是优异的核反应堆控制材料。

Hafnium metal is excellent nuclear reactor control material .

噪声控制材料的性能测试

Property test of Noise Control Material

高含量SiP/Al热控制材料的无压浸渗工艺及热性能研究

Study on Process and Thermal Properties of Si_P / Al Composites Prepared by Pressureless Infiltration

结果表明：PAM可以有效地控制材料的形貌及粒度。

The results showed that the morphology and particle size of the material could be controlled efficiently by PAM .

核反应堆控制材料&B4C的研究

Study of reactor control material-b_4c

干燥温度对纳米级Ni（OH）2的团聚程度有较大影响，并可以在一定程度上控制材料的密度。

Drying temperature has a great influence on the agglomeration degree of nano-scale Ni ( OH ) _2 and thus can also control the density of nano-scale Ni ( OH ) _2 within a certain extent .

造船材料费跟踪系统的建立体现了现代物料管理与ERP系统的成功运用，对于其他造船企业控制材料费方面提供了新的思路。

The materials cost F / U information management system is the embodiment of the succeed application with modern materials management and ERP system management , which is beneficial for shipbuilding enterprises ' materials cost control development .

结果表明，通过优化化学镀工艺，调整施镀时间和SiC微粒的添加速度及添加量等参数，可以合适地控制材料镀层的厚度和成分梯度分布。

The results show that the thickness of FGM coating and the gradient distribution of composition can be controlled by changing the parameters such as plating time , the addition speed and concentration of SiC particles after optimizing electroless plating technology .

在MTS伺服控制材料试验机上测得了陨石的全程应力&应变曲线。对焊接空心球节点整体模型进行应力计算分析；

The whole stress-strain curve of the meteorite is drawn on a MTS servo-controlled testing machine , and the compressive strength , elastic modulus and Poison 's ratio are determined as well by way of uniaxial compression .

结合对ISO9000标准内涵的深刻理解，在总结贯标工作经验的基础上，从编制可行的项目质量计划，严格控制材料质量等方面，提出贯彻执行ISO9000标准，提高施工管理水平的措施。

Based upon detailed understanding of ISO 9000 standard and hand on background in carrying out international standards the measures are proposed in terms of scheduling feasible quality program , strictly control raw materials ' quality and other aspects to improve construction management level .

采用低周疲劳加载方法在Instron电液伺服控制材料试验机上实现了岩石中等应变速率下的动态加载破坏试验。

By using of the INSTRON electro-hydraulic and servo-controlled material testing machine and adopting low-cycle-index fatigue loading method , the test of rock failure with medium strain rate under dynamical loading had been carried out successfully .

最后，采用低周疲劳加载方法在Instron电液饲服控制材料试验机上进行了红砂岩中应变率下的动静组合加载破坏试验，对应变能密度准则和突变理论模型进行了验证。

Finally , by using of the Instron electro-hydraulic and servo-controlled material testing machine and adopting low-cycle-index fatigue loading method , the test of red sandstone failure with medium strain rate under dynamic loading is carried out to verify the strain energy density criterion and catastrophe theory model .

在FC-1飞机刹车材料（文中简称FC-1材料）的基础上，适当控制材料中石墨的加入量，在改善材料摩擦性能的同时进一步提高材料的机械强度，获得一种综合性能良好的新型刹车材料。

By suitable controlling the amount of graphite in FC-1 friction materials used for making landing brakes of airplane , the frictional properties and the mechanical strength of the material were therefore a new type of friction material , FC-2 , with favourable combination of properties was obtained .

矿井瓦斯爆炸控制材料的实验研究

Experiment Research on the Material Controlling Gas Explosion in Underground Coal Mine

发展施工分包控制材料消耗

Development of Construction Subcontract , Control of Material Consumption

在成形过程中，控制材料拉伸失稳是生产合格零件的前提。

Controlling plastic instability of the material is prerequisite to manufacture qualified products .

微机控制材料试验机的干扰源分析及抗干扰措施

Analysis of Interference Source of Computerized-Control Material Test System and Means of Anti-Interference

用离子束控制材料电子发射性能及应用

The control of electron emission property in materials by ion beam and its application

堆肥化过程中氮素损失控制材料的添加试验研究

Materials of Controlling Nitrogen Loss During Composting

有效控制材料的变形温度是获得良好热加工塑性、降低变形抗力和获得均匀微观组织的关键措施。

Ideal plasticity and resultant microstructures can be achieved by effective control of deformation temperature .

电缆终端型电场的应力控制材料及结构

Materials and Construction of the Stress Control Device for the Electric Field of Cable Termination

设置拉延筋是板料拉深成形过程中控制材料流动的有效方法。

Drawbead application is an effect method in sheet metal deep-drawing process to control material flow .

模板的结构、性质及存在状态等直接影响和控制材料的结构和形态。

Structure and character of the template have great effect on structure and morphology of the materials .

铝光亮阳极氧化涂层是一种重要的航天器热控制材料。

The white anodic film on aluminium surface is a kind of important thermal control coatings for spacecraft .

摘要根据空间快堆的具体特点，采用液态金属锂为控制材料。

According to the characteristics of space fast reactors , liquid metal lithium is selected as control material .

用作反应堆控制材料，特种玻璃器皿着色。

Function : used in the manufacture of reactor of the domination materials ; color particular kind of glass ware .

在早期，从事卤化银照相的人们凭经验和有限的能力控制材料的某些结构在纳米级范畴。

In the early period , photographic scientists developed empirically silver halide technology controlling some structures of photographic materials in nanoscale .

本文研究的结果对脆性材料强度指标选择和生产厂家控制材料质量方面有重要的参考价值。

The result of this work is important for to choose the strength index of brittle materials and to control the quality .

通过测量，达到控制材料物理特性的要求，以满足产品实际应用的需要。

Through measurement , achieve control of material of physical characteristics requirement , in order to satisfy the needs of product application .

通过调整热处理工艺与控制材料中夹杂物级别可以解决断口不平问题。

The problem of tensile fracture convexity could be solved by optimizing heat treatment technology and controlling grade of inclusion in raw materials .