扁线

  • 网络flat-wire;flat wire
扁线扁线
  1. 不锈钢扁线及半圆线常用材料

    Commonly used materials for Stainless Flat Wire & Half Round Wire

  2. 连续挤压生产铜扁线硬化装置的设计

    Design of Copper Flat Wire Strengthening Equipment

  3. 铜扁线连续挤压生产线GOT监测控制系统

    Development of GOT Display and Control System for Continuous Copper Strips Extrusion Line

  4. 基于PLC的连续挤压铜扁线硬化控制系统设计

    Design of the controlling system of hardening device about continuous extrusion of copper flat wire based on PLC

  5. 网侧绕组和阀侧绕组的电磁线采用H级聚酰亚胺漆包铜扁线,以提高绝缘可靠性。

    The electromagnetic wires of the line side winding and the valve side windings adopt H-grade polyimide enamel covered flat wires so as to improve the insulating reliability .

  6. 设计了一种强化铜扁线的设备,包括其工作原理、机械结构和以计算机与PLC为核心的控制系统。

    Copper flat wire strengthening equipment was introduced in this paper , including its working principles , the mechanism structure and the control system composed of computer and PLC .

  7. 线包采用丝包铜扁线技术工艺,用H级绝缘材料垫层,散热快、效率高、寿命长。

    Bare copper flat wire technology is adopted for wire package , with H class insulant as bedding to realize functions like : quick heat dissipation , high efficiency and long working life .

  8. 利用VFW进行视频采集卡的研究,并实现了铜扁线表面图像的实时采集。

    We research the VFW and the real-time collection of digital image became true .

  9. 铜扁线连续挤压生产的模糊控制

    Fussy control apply in continuous extrusion production of flat copper wire

  10. 铜扁线产品质量明显提高,并已经广泛应用于铜扁线的生产。

    The quality of rectangular copper wire have been improved .

  11. 拉拔退火法与连续挤压法铜扁线的组织分析

    Microstructure of Copper Strip Produced by Drawing - anneal and Continuous Extrusion

  12. GB/T4074.10-1983漆包线试验方法漆膜附着性试验扁线

    Methods of test for enamelled wires Adherence test Rectangular wires

  13. 对国产LHD-700/5型型线拉线机生产紫铜扁线的评议

    A Discussion on Domestic LHD-700 / 5 Stretcher for Producing Flat Copper Wire

  14. 铜扁线连续挤压生产控制系统数学模型的实验测定法

    Experimental modeling of the control system of continuous extrusion production of copper strip

  15. 适用于起动电机定子磁场扁线绕组的绕线。

    Be suitable for winding of motor stator magnetic field 's flat wire .

  16. 铜扁线连续挤压成形过程的数值模拟

    Simulation on Continuous Extrusion Forming Process of Copper Strip

  17. GB/T4074.7-1983漆包线试验方法扁线弯曲试验

    Methods of test for enamelled wires & Mandrel winding test for rectangular wires

  18. 铜扁线连续挤压技术

    Technology of continuous extrusion for rectangular copper wire

  19. 铜包铝复合扁线轧制变形行为的数值模拟与实验研究

    Numerical simulation and experimental investigation on rolling behaviors of copper cladding aluminum flat wires

  20. 智能化铜扁线强化机的研制

    Development of the Intellectualized Copper Strip Strengthening Machine

  21. 铜扁线生产工艺中的配模机理及计算机管理

    Principle and computer management of dies arrangement in the process of flat copper wires

  22. 通过对铜扁线表面图像的研究,总结了对图像噪声的处理方法,找出了降低噪声的适合铜扁线检测的一些方法。

    We research the copper strips ' digital images and find the ways to denoising .

  23. 在微细扁线的生产中,收卷是很重要的一个环节。

    The winding is a very important aspect in the production of fine flat line .

  24. 不同阻碍角下大宽厚比铜扁线连续挤压过程数值模拟

    Numerical Simulation of Big Flakiness Ratio Copper Flat Wire Continuous Extrusion Forming for Different Hindrance Angles

  25. 应用连续挤压技术生产铜扁线

    Copper strip produced by continuous extrusion

  26. 铜扁线主要应用于变压器、电动机、发电机以及各种电器设备的绕组中。

    Copper strip is mainly used in transformers , motors , generators and windings of electrical equipment .

  27. 该强化设备将应用于对连续挤压生产的铜扁线进行强化。

    The equipment will be used to strengthen the copper flat wire produced by continuous extrusion machine .

  28. 分析了传统拉拔退火法和连续挤压法生产铜扁线的组织。

    The microstructure for copper strip produced by traditional drawing anneals method and continuous extrusion method are analyzed .

  29. 但是采用连续挤压方法只能得到软态的铜扁线,抗变形能力较差。

    But the copper strips made by continuous extruding are soft and the anti - bending property is low .

  30. 得出铜扁线中间层纵向应变、弯曲力矩、压弯力和包角的计算公式。

    The calculation formulas about neutral layer vertical strain , bending moment , bending force wrap angle were deduced .