弯曲度

  • 网络Curvature;BENDING;Bend;BOW;Tortuosity
弯曲度弯曲度
  1. SEM分析表明:原棉纤维的表面较光滑,并有一定的天然弯曲度。

    SEM analysis showed that the surface of pure cotton fabric fiber was smooth and had a certain degree of natural curvature .

  2. PCL角和弯曲度指数测量结果在ACL损伤组和非损伤组间具有显著性差异(P<0.01)。

    There were remarkable statistical differences between the ACL tears group and ACL normal group in the results of ( PCL ) angle and PCL curvature index ( P < 0.001 ) .

  3. 基于CCD的身管弯曲度的测量

    Measurement of cannon barrel straightness based on CCD

  4. 基于Zernike矩的管道弯曲度高精度检测

    Camber Measurement Based on Zernike Moments at High Accuracy

  5. Micro-CT评价不同弯曲度根管预备后根尖偏移的实验研究

    Evaluation of apical transportation after shaping different curved root canals by Micro-CT

  6. 本文从PCB的设计、物料选择、压板程序、流程操作等四个方面介绍了影响PCB弯曲度的一些因素。

    The paper introduce some factor about influence of PCB wrappage from PCB design , materiel selection , press program , flow operation four aspect .

  7. 结论:LASIK术后,角膜弯曲度、球面性的改变及其设计理论,可能影响角膜地形图的测定结果。

    Conclusion : After LASIK , corneal topography may be affected by corneal sphere , curvature change and the design .

  8. 分析内圆锯切过程中,振动变化及其对硅晶片表面粗糙度、弯曲度和TTV的影响。

    Analysis the effect of the wafers ' surface roughness and its precision leading from the vibration of the blade .

  9. 结论前交叉韧带撕裂病人的PCL弯曲度增大,可作为MRI诊断前交叉韧带撕裂的间接征象之一。

    ConclusionThe camber of PCL in the patients with complete ACL rupture increases , which can be used as one of indirect signs for MRI diagnosis of ACL rupture .

  10. 结论:DHS抗弯曲度强,有利于断端,尤其是压力侧骨折愈合。DHS内固定手术不复杂,治疗粗隆部骨折效果较好。

    Surgery of fixing inside using DHS is not complex and its curative effect to fractures of thighbone tuberosity is better .

  11. 终访时,A组平均椎间高度和颈椎前弯曲度较术后早期显著性降低(P<0.05),B组、C组和D组则无显著性差异(P>0.05)。

    When the following-up was over , the average of interbody height and interbody angles had significantly reduced compared with early following-up in group A ( P < 0.05 ) . There was no significant difference and complication of implanted material in group B , C and D.

  12. BASF已经研发了一项新的系统,可以改善涂层表面硬度,并且使涂层有更好的弯曲度和深拉伸强度。

    BASF have developed a new system which provides coatings with improvements in surface hardness as well as better bending and deep-drawing strength .

  13. 系统地介绍了混凝土孔结构存在的各种分形特性,在此基础上结合混凝土的孔结构特征,利用广义vonkoch曲线构造描述孔通道弯曲度的孔轴分形模型,并确定孔轴分形维数的计算方法。

    Based on the pore structure characteristic and Von koch curve , we constructed the pore axis fractal model and ascertained the computational method of the pore axis fractal dimension .

  14. 对8例有前交叉韧带(ACL)损伤和22个没有ACL损伤的膝关节,分别测量后交叉韧带(PCL)角和弯曲度指数,并进行统计学分析。

    The posterior cruciate ligament ( PCL ) angle and PCL curvature index were measured in 8 patients with anterior cruciate ligament ( ACL ) tears and in 22 patients with ACL normal .

  15. 在利用高斯子波得到的以弯曲度为基本量的无穷域中NS方程的基础上,得到了有界区域内的以弯曲度为基本量的NS方程。

    Gaussian wavelet is used to obtain the N-S equation with flexion as a fundamental quantity in an infinite domain . The ( N-S ) equation with flexion as a fundamental quantity in a finite domain is shown .

  16. 然后利用CAD工程制图里常用的B样条曲线拟合航迹,在综合考虑到船舶航行采集的经纬度数据量大、转换后的坐标点列弯曲度大、分布间隔也不均匀等因素后。

    After comprehensive consideration to such factors as the large amount of latitude and longitude data that was collected when ship was navigating , converted coordinate point series bending heavily , uneven distribution interval , using b-spline curve which is usually used in the CAD engineering drawing to fit track .

  17. 锯片振动及磨损过程对硅晶片表面粗糙度、弯曲度和TTV的影响。采集从新锯片开始锯切到失效整个过程中,锯片径向和轴向振动信号。

    The effect between vibration of the blade , its abrasion and the wafers ' surface roughness , warp and TTV . Sample the radial and axial vibration of the blade , and carry on power cepstrum , frome a new ID saw blade slicing till to its invalidation ;

  18. 百米钢轨矫前弯曲度与残余应力的研究

    Research of Curvature and Residual Stress before Straightening on 100-meter Rail

  19. 节矩法测量火炮身管弯曲度的数学模型

    Mathematical Model Study to Measure Bore Flexure Degree with Interception Method

  20. 镍钛机动根管预备器械对根管弯曲度的影响

    The Effects of Three Nickel-Titanium Rotary Instruments on Root Canal Curvature

  21. 机织织物及针织物的弯曲度及偏斜度试验法

    Test method for bow and skewness of woven and knitted fabrics

  22. 石墨薄片弯曲度的高分辨率电子显微镜研究

    A high resolution electron microscopy investigation of curvature in multilayer graphite sheets

  23. 两个方向上的弯曲度无明显差异(P>0.05)。

    There is no difference of curvature degree in the two directions .

  24. 这个临界值与纤维的摩擦因数,弯曲度,均匀程度等相关。

    The threshold effect by fiber frictionfactor , curvature , and uniformity .

  25. 光栅光调制器的表面弯曲度分析及实验

    Analysis and Experiment of Surface Bending of Grating Light Modulator

  26. 根管弯曲度的曲线分析和几何学测量

    Curve analysis and geometric measurement of root canal curvatures

  27. 弯曲度能和留下它们的人匹配起来。

    The curvature can be matched back to the person that made them .

  28. 原木弯曲度对顺纹抗压强度影响的研究

    Effect of bowing rate of log on the compression strength parallel to grain

  29. 根管弯曲度测量法的几何原理剖析

    Geometrical analysis in measurements of root canal curvature

  30. 如果弯曲度不够的话,又会导致视觉的失真(远视)。

    If not curved enough , distortion occurs in the foreground ( hyperopia ) .