弯曲表面

  • 网络curved surface
弯曲表面弯曲表面
  1. 弯曲表面上光的临界反射现象及其应用

    The critical light reflection from curved surface and Its Applications

  2. 这些试验使他们掌握了空气作用在弯曲表面时的实际情况。

    These tests gave them the correct information about air pressure on curved surfaces .

  3. 平滑弯曲表面的区域反射特性

    The Zone Reflection Characteristic of the Smooth Bent Surface

  4. 康达效应是指流体总是倾向于沿着它所接触到的弯曲表面的轮廓流动。

    Coanda Effect refers to the fluid tend to along its figure of the curved surface .

  5. 是一种方法,通过它地球的弯曲表面被描绘于一个平坦的表面。

    A method by which the curved surface of the earth is portrayed on a flat surface .

  6. 对倾斜和弯曲表面进行激光微抛光试验研究,也得到较好的光滑表面。

    Some of laser polishing experiments on the tilt and bending metallic surface were made and better results were also gotten .

  7. 用开口同轴探头测量弯曲表面高损耗材料涂层的电磁特性的研究

    A Study on Finite Flange Open-ended Coaxial Probe and Its Application to Electromagnetic Properties Characterization of Curved Surfaces High Loss Coating Materials

  8. 针对一种特殊的三维目标&平滑弯曲表面,从理论上讨论了它的区域反射特性;

    The zone reflection characteristic of the smooth bent surface & a special 3 D object is discussed in theory in the paper .

  9. 该传感器由于在柔性基底上制作,可用于桥梁等结构设施中弯曲表面的应力应变检测。

    These flexible sensors can be used on curved surfaces of bridges and other buildings to test stress and strain because of their flexible substrates .

  10. 按照这一模型,液体的某些表面现象,如表面张力、弯曲表面的饱和汽压等都能得到满意的说明。

    There is a different value of saturated vapour pressure between the plane liquid surface and the curved one , namely an additional value ( positive or negative ) .

  11. 细陶瓷-单块陶瓷常温断裂韧度试验方法-弯曲表面龟裂法

    Fine ceramics ( advanced ceramics , advanced technical ceramics ) - determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure ( scf ) method

  12. 散射体可为具有弯曲表面的三维物体,传输结构可为多介质的变向和分支型导波结构,时间波形可为单频定态波也可为任意脉冲波。

    The scatterer may be a 3-D body with curved surface , and the transmission structure may be direction-changeable and a branched one with multiple dielectrics . The incidence can be either single frequency sine-wave or arbitrary impulse wave .

  13. 你的脚会感觉比头更“重”一些,你的感觉就像是被拉伸了一样:就像你躺在橡胶球的弯曲表面上,或者你躺在旋转木马的地上,并且头靠近中心。星球表面的逃逸速度约为每秒5米。

    Your feet would feel heavier than your head , which you 'd feel as a gentle stretching sensation . It would feel like you were stretched out on a curved rubber ball , or were lying on a merry-go-round with your head near the center.The escape velocity at the surface would be about 5 meters per second .

  14. 一种悬臂弯曲加载表面裂纹扩展试样及其应用

    Specimen for surface crack growth by loading at cantilever bend and application

  15. 近零冲角下环型压气机叶栅的弯曲叶片表面静压的研究

    A Study of the Surface Static Pressure of Curved Blades in Annular Compressor Cascades at Near-zero Incidence

  16. 刚毛可以弯曲与表面上的所有沟壑与裂缝进行连接。

    These setae can bend to make contact with all the grooves and crevices in a surface .

  17. 弯曲滑动表面上的偶配表面应当由单块加工成需要的表面光洁度。

    The mating surface of curved sliding surfaces should be machined to the required surface finish from a single piece .

  18. 一种端子上带有弓状的探头,专供测量滚轴、管道、圆柱体和极弯曲的表面。

    A bow type head on this probe for measurement of rollers , pipes , cylinders and most curved surface .

  19. 当心接缝。一个弯曲/光滑表面应是少有接缝的。

    Be careful with seams . A curved / smooth surface should be seamless .

  20. 壁薄、大面积、表面不加工的平板铸件易出现弯曲变形、表面质量不好等问题。

    Slab casting with thin wall 、 large area and unprocessed surface is easy to produce warping deformations and surface quality defect , etc.

  21. 同时,结合表面弯曲模型和表面态分析了不同形貌的多孔结构的形成机理。

    The formation mechanism of porous InP with different structure is discussed combining surface curvature model for porous Si with surface state , and characteristics of InP wafers . 3 .

  22. 研究了聚烯烃/霞石复合材料的拉伸性能、弯曲性能和表面硬度,并采用扫描电镜直接观察其冲击断面的形态结构以及霞石在基体材料中的分布状态和被包裹状态。

    The tensile properties , bending properties and hardness of polyolefin / nepheline composites were studied in this paper , and the morphology of the impact samples and the situation of dispersion and coverage of nepheline were directly observed by means of SEM .

  23. 根据Paris疲劳裂纹扩展规律,对拉伸和纯弯曲疲劳载荷下表面裂纹扩展进行了数值模拟。

    Fatigue crack growth of surface cracks in tension and bending plates is investigated with numerical simulation technique based on the Paris law of fatigue crack growth rate .

  24. 通过研究温度对GMT材料的力学性能(弯曲强度)、表面质量的影响,得到了优化的工艺参数。

    The influence of temperature and pressure on mechanical properties , surface quality and dimension precision are discussed and get the process parameters optimized .

  25. 静叶正弯曲改变了叶片表面的静压分布,在吸力面表面建立起了C型压力分布,即沿径向两端压力高,中间压力低。

    The positive dihedral stator changed the static pressure distribution on the surface of blade , and it establishs the C-type pressure distribution on the suction surface , which means that the static pressure near end wall is higher than that far from the end wall in radial direction .

  26. 不锈钢管弯曲椅架,表面镜面抛光,完美圆角弯曲。2、特制加厚皮革坐垫。

    Fully welded tubular steel frame with mirror finish , Full round bends . 2 , heavy reinforce saddle leather .

  27. 采用作者新近提出的四节点压电复合材料层合矩形板弯曲单元,对表面粘贴有压电驱动器的复合材料层合板在外加电场和外载荷作用下的弯曲变形进行了分析。

    The bending deformations of piezoelectric laminated plates subjected to combined applied voltage and loads were analyzed by using the proposed rectangular bending element .

  28. 通过电测法观测不同加压量固定的不同实验模型在不同等级弯曲工况下骨表面的应变及轴向位移变化;

    The method of electric resistance fragments were used to observed values of stress of bone surface and axial displacement at grade loads and various models .

  29. 表面弯曲性能优良、表面质量高、耐蚀性差,适用于较温和的应用环境如室内家电,办公用品。

    Coating easy for bending and good surface quality , poor corrosion-resistant performance , suitable for such applications as electrical household appliances and things for office use .

  30. 实验测试了该光纤弯曲传感器,结果表面其相对于现有的光纤弯曲传感器在分辨率上有较大的提高。

    Took experimental tests of the optical fiber bending sensor , measurement results show it has a resolution of 0.004 m-1 which is higher than most of bending sensors .