弥散强化材料

文本概述，机械合金化方法生产氧化物弥散强化材料的进展及其展望。

This paper summarizes the development of oxide dispersion strengthened materials made by mechanical alloying and looks forward to the future .

采用粉末冶金方法制备出Ag-ABO3颗粒弥散强化材料，并对新材料的制备工艺和电接触性能进行了研究。

The new composite materials of Ag-ABO 3 were prepared by the method of powder metallurgy . The preparing technique and performance of the composite were studied .

机械合金化是一种很有发展前景的固态合金化方法，已成功地应用于制备纳米级超细晶弥散强化材料、磁性材料、超导材料、纳米晶材料等。

The mechanical alloying is an excellent technology of alloying in solid state witch has good prospects and has been applied successfully to produce nano-crystalline ultrafine grain dispersion strengthened materials , magnetic materials , superconducting materials and nano-crystalline materials .

原位生成TiC制备弥散强化铜材料

Preparation of In-Situ TiC Particle Dispersion-Strengthened Copper Matrix Composites

利用机械合金化与高温烧结方法制备WC弥散强化铜材料，研究了高温烧结温度和烧结时间对复合材料组织和性能的影响。

WC dispersion strengthened copper ( DSC ) was prepared by mechanical alloying ( MA ) in combination with high temperature sintering . The influence of sintering temperature and time on microstructure and properties of the composites are discussed .

产业化制备弥散强化铜材料的性能及工艺研究

Performance and Processing Technology of Dispersion Strengthened Copper Materials Manufactured In Commercial Production

对高强高导弥散强化铜材料的可锻性进行了实验研究。

The forgeability of dispersion-strengthened copper material with high strength and high conductivity is studied .

对Cu-0.54%Al2O3弥散强化复合材料的拉伸变形和断裂行为进行了研究。

The tensile deformation and fracture behavior of Cu-0.54 % Al_2O_3 dispersion strengthened copper alloy were examined .

结果表明：用这种工艺制备的弥散强化铜材料具有高致密度、高强度、高电导率及高温热稳定性等优点；

The results indicate that the materials made by this technology have high density , high strength , high electrical conductivity and thermal stability at high temperatures .

研究了气雾化、气雾化+离心雾化及高压水雾化方法制取铜铝合金粉对弥散强化铜材料性能及冷加工性能的影响。

The effect of gas atomization , gas atomization and centrifugal atomization , water atomization on properties and cold-working properties of dispersion strengthened copper is summarized in the research .

研究了产业化制备弥散强化铜材料的力学性能、导电性能、微观结构，对产业化制备弥散强化铜材料工艺因素及现有工艺存在问题进行了分析与讨论。

The mechanical properties , conductivity character and the microstructure of dispersion-strengthened copper materials manufactured in commercial scale are studied . At the same time , the existing technological factors and problems are analyzed and discussed .

本文运用理论分析与实验研究相结合的方法对内氧化法制备的Al2O3弥散强化铜复合材料的内氧化动力学及其再结晶行为进行了深入研究。

To solve this problem , the research on fabrication method of Al_2O_ ( 3p ) / Cu composites by internal oxidation has been carried out on the basis of theoretical and experimental analyses .

Al2O3弥散强化铜复合材料是一类具有优良综合物理性能和力学性能的新型结构功能材料，在现代电子技术和电工等领域具有广阔的应用前景，因而成为铜合金材料的研究热点之一。

Due to the excellent comprehensive mechanical and physical properties of Al_2O_ ( 3p ) / Cu composites , It has been found a wide application prospect in the fields of modern electronic technology and electrotechnics . It is now a hotspot in the study of copper-based alloy .

弥散强化铂的材料特性和应用研究

Material Properties of Dispersion - Strengthened Platinum and Its Application

新型弥散强化铂合金材料的研制

The Study on A New Dispersion Strengthened Platinum Alloy

研究了含08%Al2O3的弥散强化铜电极材料在点焊镀铝钢板时的作用机理、失效形式及成因。

The failure modes of spot-welding electrode of Al_2O_3 / Cu , as well as their causes and interaction between steel and electrode , were studied during spot welding of aluminum-coated steels .

弥散强化铜复合材料具有高导热率、高导电率和优良的高温强度、高温抗蠕变性能、耐磨性能好等优点，广泛应用于机电、电子、宇航和原子能等领域。

The composite material of dispersion-strengthen copper owned high thermal conductivity , high electrical conductivity and excellent high temperature strength , high-temperature creep resistance , good wear-resistance and so on , is widely used in electromechanical , electronics , aerospace and nuclear fields .

Al2O3弥散强化Cu基复合材料高温拉伸行为研究

Tensile Behavior of Al_2O_3 Dispersive Strengthened Copper-based Composite at Elevated Temperature

混粉工艺对纳米Al2O3弥散强化铜基复合材料摩擦学特性的影响

Study on the Tribology Characteristics of Nano-Al_2O_3 Reinforced Copper Based Composite

硝酸盐分解法制备Al2O3弥散强化铜基复合材料的研究

Al_2O_3 Dispersion Strengthened Copper Composite Manufactured by Decomposing of Nitrate

机械合金化制备SiC弥散强化铜基复合材料

Preparation of SiC Particulate Reinforced Cu Matrix Composites by Mechanical Alloying

陶瓷颗粒Ti3SiC2-碳纤维弥散强化铜基复合材料组织和性能研究

Microstructure and Properties of Ti_3SiC_2 / Carbon Fibre Dispersion-strengthening / Cu-graphite Composites

本文用Cu粉和Ti3SiC2粉，结合热压烧结的工艺方法，成功地制备了Ti3SiC2弥散强化铜基复合材料&Cu/Ti3SiC2。

In this paper , we successfully fabricated Ti_3SiC_2 dispersion strengthened copper composite & Ti_3SiC_2 with Cu powder and Ti_3SiC_2 powder by hot pressing .

综述了Al2O3弥散强化铜基复合材料的各种制备工艺及研究进展，对内氧化法制备Al2O3弥散强化铜基复合材料进行了详细的阐述。

The fabrication processes of Al_2O_3 dispersion strengthened copper composite are reviewed in this paper . The method of internal oxidation process is discussed in detail .

Al2O3弥散强化铜基复合材料（Al2O3/Cu复合材料）因其具有优良的高强度高导电性能以及抗高温软化性能而成为备受瞩目的一种工程材料。

Alumina dispersion strengthened copper composite ( Al_2O_3 / Cu composite ) is an attractive engineering material for applications requiring high strength , high thermal and electrical conductivities and resistance to softening at elevated temperatures .

以纳米Al2O3为增强相，用粉末冶金法制备了弥散强化铜基复合材料，研究了混粉工艺对复合材料滑动摩擦学特性的影响。

Using nano-Al_2O_3 as reinforced phase , dispersing strengthening copper based composite materials was fabricated by powder metallurgy method . Effects of mixed processing on the tribology characteristics were studied .

W以碳化物的形式加入到Fe-Mn-Mo-Cu-C烧结硬化钢基体中，起到了弥散强化的作用，材料的磨损量显著降低。

The wear amount of the materials was remarkably reduced due to the dispersed strength of tungsten carbide that was added into Fe-Mn-Mo-Cu-C sintering-hardened steel .

点焊电极用弥散强化铜基复合材料的进展

Development of Oxide Dispersion-Strengthened Copper-based Composites for Electrode of Spot Welding

弥散强化铜基复合材料制备工艺

A new method to prepare dispersive strengthened copper matrix composites

弥散强化铜基复合材料钎焊接头强度

Strength of vacuum brazing joint of dispersive strengthening Cu base matrix composite