密封材料

在此基础上，选择陶瓷密封材料作为研究对象，对其结构进行了设计，确定了以Al2O3微粉为主的原料体系和流延制备工艺。

According to the above results , ceramic sealing materials were selected as the subject of study and the microstructure of the seal was designed ; accordingly , Al2O3 fine powder was chosen as the baseline material for the seals prepared by the tape casting process .

预制体对C/C密封材料性能的影响

Effect of Preform on Properties of C / C Sealing Materials

耐N2O4新型羧基亚硝基氟橡胶密封材料性能研究

Study on Sealing Properties of New N_2O_4 Resistance Carboxy Nitroso Fluororubber

基于Matlab的浸锑石墨密封材料的分形特征研究

Study of Fractal Characteristics of Antimony Impregnated Graphite Seal Material Based on a Matlab

用于火箭液体氧化剂（N2O4）系统的新型橡胶密封材料

A New Type of Rubber Sealing Material for the Propulsion Systems of Liquid Propellant Rockets

SiC陶瓷密封材料的性能分析

Analysis of properties of SiC ceramic material for sealing

SF6电器密封材料和密封结构的研究

Research into Sealing Material and Sealing Structure for SF_6 HV Apparatus

BN对镍基可磨耗密封材料烧结性能的影响

Effect of BN on Sintering Properties of Ni-based Abradable Seal Alloy

在热循环条件下，通过漏气率测量来评价Al2O3基密封材料的热循环性能。

Leakage rate was tested during thermal cycling to evaluate the thermal cycle stability of Al2O3 based composite seal .

超细SiO2增强聚硅氧烷特种有机硅密封材料形态结构与动态流变行为

Preparation , Morphology and Dynamic Rheological Behavior of Specific Organosilicone Sealants Composed of Ultrafine Silica Reinforced Polysiloxanes

不同Al2O3密封材料性能之间的差异主要与这些材料的微观特征有关。

The difference in sealing effectiveness between seals prepared with various Al2O3 powders is mainly correlated to their powder characteristics .

基于MDI浇注型聚氨酯弹性体密封材料的研制

Development of MDI Based Castable Urethane Elastomer Material

对压缩非石棉短纤维增强橡胶密封材料（简称CFS材料）蠕变理论和试验进行了研究。

The creep theory and experiment of compressed non-asbestos fiber-reinforced sheet ( CFS ) were investigated .

EPDM密封材料组分多且复杂，各组分通过化学交联反应，彼此成为一个相互影响，相互牵制的复合系统。

EPDM seal material is complex by chemical cross-linking reaction to be a composite system which is mutual influence and restraining .

MCR缸头垫&新型金属复合橡胶密封材料的研发与应用

MCR Cylinder Head Sealing Gasket-Research , Development and Application of Metal Compounded Rubber Sealing Material

铜原位改性HMS材料的表征及抗菌性能改性聚氨酯防水密封材料的流变特性

Characterization and Antibacterial Ability of Copper-Modified Hexagonal Mesoporous Silica in situ Rheological Behavior of Modified Polyurethane Waterproof-sealing Material

提高压缩机自润滑抗磨密封材料PEC的界面力之研究

The Improvement of the Interfacial Bonding of the Self-Lubricating and Wear Resistant Sealing Material , PEC , for a Compressor

介绍了垃圾卫生填埋场防渗系统中密封材料HDPE膜及GCL的主要性能及特点。

This article introduces the main functions and features of HDPE membrane and GCL used as the water resistance material for the refuse landfill site .

结果表明：用RFL乳液处理过的芳纶纤维增强橡胶基复合密封材料的性能最佳。

The results show that the Aramid fiber pretreated by RFL latex reinforced sealing material is perfect .

高温电解水蒸气制氢用SOEC微晶玻璃密封材料制备

Preparation of Glass-Ceramics as Sealants of SOEC Stack for Producing Hydrogen by Electrolyzing Vapor at High Temperature

核潜艇用G-39型隔声密封材料释放气体测定及卫生学评价

Measurement of Gases Released by Type G-39 Sound Isolating and Sealing Material Used aboard Submarines and Its Medical Evaluation

研究了BN含量对镍基可磨耗密封材料烧结性能的影响，分析了Ni-Cr和Ni-Cr/BN的烧结过程，并建立了烧结过程模型。

The effect of BN content on sintering properties of Ni-based abradable seal alloy was investigated . The sintering process and model with BN and without BN were studied . To establish model to research the process of Ni-Cr / BN sintering expansion .

目的：评价G-39型隔声密封材料能否用于核潜艇舱室。

Purpose : The study was carried out to evaluate whether type G 39 sound insulating and sealing material can be used aboard submarines .

QFN是一种焊盘尺寸小、体积小、以塑料作为密封材料的新兴的表面贴装芯片封装技术。

The QFN package ( Quad Flat No-lead Package ), a new and developing technology for chip package , is a small footprint , low profile , surface mount , plastic encapsulated package with leads on the bottom .

碳轴承、密封材料轴承转子系统动力学

Carbon & Material for Bearing and Sealing Dynamics of Bearing-Rotor System

浅谈国外橡胶密封材料及制品的应用现状

Existing Condition of Application of Foreign Rubber Sealing Material and Products

复合工艺制备炭／炭密封材料弯曲断裂特征

Fracture Characteristics of Carbon / Carbon Composites Prepared by Mix Technics

以自产聚醚多元醇为主要原料，研制成功汽车空气滤芯用聚氨酯密封材料。

Polyurethane gasket in air filter has been developed for automobile .

新型密封材料在水泵中的节能应用

Energy saving application of new mode sealing material in water pump

非石棉短纤维增强橡胶密封材料蠕变的理论和试验研究

Study on creep of compressed non - asbestos fiber-reinforced rubber sheet