室温固化

由于人们对环境保护意识的不断增强，发展室温固化和低污染、低VOC的环保涂料已成为涂料涂装行业的世界性课题。

Development of environmental protection paint with room temperature curing , low contaminant and low VOC has become world wide important topic in paint industry due to the increasing enhancement in the enviromental protection consciousness .

白色涂料聚合树脂，与K-92固化剂组合，用于无溶剂室温固化抗化学腐蚀内衬。

Formulated white pigmented epoxy resin used in combination with hardener K-92 for solvent fee , room temperature curing chemical resistant linings .

室温固化低黏度双酚F环氧树脂体系的研究

Study on room temperature cured and low viscosity diglycidyl ether of bisphenol F resin system

纳米TiO2改性室温固化硅橡胶的力学性能研究

Study on Mechanical Characteristic of RTV Silicon Rubber Modified by nano-TiO_2

硅氢加成型室温固化硅橡胶胶粘剂的研究聚二甲基硅氧烷结构的~1HNMR研究和硅氢、硅羟基含量的测定

Study of structure of polydimethylsiloxanes and determination of hydrogen and hydroxyl bonded to silicone by Fourier transform ~ 1h NMR

采用DSC、TMA等方法对CY-22室温固化耐热环氧胶粘剂的配方、工艺及性能进行了研究，并与国内外同类产品进行了比较。

The paper studies its formula , process and properties , and compares with those produced abroad .

采用室温固化硅橡胶及其它三种改性硅氧烷聚合物制成渗透汽化膜，分离丙酮（A），丁酮（B）、乙醇（E）及异丙醇（P）等有机物的水溶液。

Pervaporation of dilute aqueous binary mixtures of four organic compounds ( acetone A , butanone B , ethanol E and isopropanol P ) through silicone rubber ( PDMS ) and its modifications was investigated .

选择具有设计结构的固化剂和活性稀释剂，并研究其对体系性能的影响，确定了室温固化耐高温低黏度双酚F环氧树脂配方体系。

By selecting and optimizing the active diluents , the curing agent and the cure schedule , diglycidyl ether of bisphenol F ( DGEBF ) resin system cured at room temperature was studied .

医用聚氨酯新型室温固化剂的研制及其作为MOCA替代物的研究

Development of New Solidify Reagent for Medical Polyurethane and Studies on it 's Application as Substitute for MOCA

丙烯酸酯共聚物水溶胶／HDI齐聚物室温固化体系的固化过程认为是：共聚物侧链上的羟基和HDI齐聚物上的NCO基团进行反应，形成交联网络。

Room-temperature curing process was studied for the system of water-solubilized colloidal dispersion / HDI oligomer . It was found that the hydroxyl groups reacted with NCO , forming crosslinking network .

J-153室温固化低粘度灌注结构胶粘剂

J-153 Room - Temperature-Curable Pouring Structure Adhesive with Low Viscosity

J-22-1室温固化环氧树脂填充胶的研制

Study on J-22-1 Stuffing bulking Adhesive Curing at Room Temperature

CARDURAE-10改性水性环氧固化剂及其室温固化机理

Waterborne epoxy curing agent modified by Cardura E-10 and the cured mechanism under ambient cure conditions

用马来酸酐和乙二胺合成了含有双键的伯胺化合物（UPA），并用其与丙烯酸系单体进行乳液共聚合制备了双组分室温固化涂料的第一组分。

An unsaturated primary amine ( UPA ) was synthesized by using maleic anhydride and ethylene diamine . The UPA-acrylate copolymer latex was prepared and was used as the first component of a novel ambient curable two-component coating .

方法：测定80℃热固化，固化时间90min与室温固化23℃，固化时间24h两组油画颜料着色的硅橡胶试样的色度值（Lab），并计算试样间的色差值（ΔE）。

Method : To measure the chroma value ( Lab ) of two groups of silicone elastomer samples colored by oil paint : heating vulcanized at 80 ℃, 90 minutes and room temperature vulcanized at 23 ℃, 24 hours , and calculate Δ E value between the samples .

柔性不饱和聚酯树脂是不饱和聚酯树脂（UPR）中的一个特殊品种，树脂室温固化，固化后柔韧性好，可做家具、地板等仿木制品。

Flexible unsaturated polyester resin is one of the special kinds of unsaturated polyester resin ( UPR ) . It can be cured at room temperature . After being cured , it has a good flexility and can be made into furniture and floor wood-like products .

基于快速成型技术的双组分室温固化硅胶制模技术

Silicone Rubber Room Temperature Vulcanized Mould Based on Rapid Prototyping Technique

室温固化含硅甲基丙烯酸酯涂料的性能研究

Studies on Performance of Ambient Temperature Curing Silicon-Containing Methacrylate Copolymer Coatings

室温固化、低硬度聚氨酯弹性体的研究

Study on the low hardness pur elastomer cured at room temperature

室温固化厚胶层高强度环氧胶粘剂

High Strength Room Temperature Curable Epoxy Resin Adhesive Under Thickening Bondline

环氧树脂的芳胺室温固化

The hardening of epoxy resin with aromatic amine at room temperature

室温固化双组分环氧树脂结构胶的研究

Study on room temperature curable two component epoxy resin structural adhesive

室温固化淀粉基水性异氰酸酯胶的研究

Development of Starch-based Aqueous Polymer Isocyanate Adhesives Curable under Room Temperature

聚氨酯改性室温固化环氧结构胶粘剂的研究

Study on room temperature curable epoxy adhesive modified with polyurethane prepolymer

一种室温固化吸波涂层基料

Absorb electromagnetic wave coat base material curing at room temperature

室温固化型高温粘结剂的制备及其性能

The preparation and performance of high temperature adhesive cured at room temperature

新型室温固化引发体系在玻璃钢中的应用

A new type of initiator system used in FRP at room temperature

室温固化耐热150℃环氧树脂结构胶粘剂

RT curable epoxy resin structural adhesive with heat resistance to 150 ℃

室温固化双组分聚氨酯浇注胶的合成

Synthesis of Two-Component Casting Polyurethane Rubber Curing at Ambient Temperature

室温固化纳米颗粒/聚丙烯酸酯复合乳液涂料

Study on Properties of Nano-particles / Polyacrylate Emulsions Cured at Room Temperature