增强尼龙

MC增强尼龙梭的修复方法及其配件降耗的实践

The Renovating Methods of MC Strengthened Nylon Shuttle and the Practice of its Consumption Reduced

GF增强尼龙1010复合材料的摩擦学性能研究

Study on Tribological Behaviors of Glass Fiber Reinforced Nylon 1010 Based Composites

比较和分析了不同类型阻燃剂对玻纤增强尼龙（PA）66性能的影响。

The effect of various flame-retardants on the properties of glass fiber reinforced PA66 is compared and analyzed .

PTFE对纤维增强尼龙66材料摩擦学性能的影响

Effect of Filled PTFE on Friction and Wear Property of Glass Fiber Reinforced Polyamide 66 Composites

采用熔融共混工艺研制了阻燃、抗静电增强尼龙6（PA6）。

Through mixing melt technology , the fire-retardant and antistatic reinforced PA6 has been developed .

结果表明，CF的加入可显著改善尼龙的摩擦学性能，以体积分数为20%的CF增强尼龙1010复合材料的耐磨性能最好。

The results show that CF can considerably improve the tribological properties of nylon 1010 composites and 20 vol.

介绍了三维编织碳纤维增强尼龙（简称C（3D）/PA）复合材料的发展历史，并归纳了C（3D）/PA复合材料几种合成工艺的利弊所在。

This paper reviews the history of 3D-braided carbon fiber reinforced nylon ( C3D / PA ) composites , and summarizes the advantages and disadvantages of methods of synthesizing the composites .

Kevlar纤维增强尼龙6复合材料的力学性能

Study on Mechanical Properties of Kevlar Fiber Reinforced Nylon 6 Composites

高CTI值、无卤阻燃玻纤增强尼龙66的研究及应用

Study on high CTI value , halogen free flame-retardant glass fibre reinforced nylon 66

研究了纤维体积比对三维编织芳纶纤维增强尼龙（简称K（3D）/PA）复合材料力学性能的影响。同时，研究了γ射线辐照处理对K（3D）/PA的影响。

The influence of fiber volume fraction on the mechanical properties of K3D / PA and the effect of Kevlar fiber surface treatment by y-ray on K3D / PA were studied .

NL系列弹性联轴器玻璃纤维增强尼龙66内齿套的研制

Development of glass fiber reinforced nylon 66 inner gear sleeve in NL series elastic shaft coupling

以注塑成型法制备了尼龙1010及碳纤维（CF）增强尼龙1010复合材料，研究了CF含量和载荷对材料摩擦学性能和磨损机制的影响。

A micro injection machine was used to prepare all the specimens of nylon 1010 and carbon fiber ( CF ) reinforced nylon 1010 composites . The effects of various loads on the tribological properties and wear mechanism of composites were investigated .

在400N载荷的水润滑下复合增强尼龙材料的耐磨性能明显优于单一炭纤维增强尼龙材料，比其干摩擦下耐磨性能也提高了1～2个数量级。

The wear resistance of Gr. - CF-nylon is distinctly higher than CF reinforced nylon only in water condition ; meanwhile , it is increased by 1 ~ 2 orders of magnitude than that in air condition at a load of 400 N.

短切玻璃纤维增强尼龙材料的摩擦与磨损

On the Friction and Wear of Short Glass Fiber Reinforced Nylon

原位聚合法制备三维编织纤维增强尼龙复合材料

Preparation of 3-D Braided Fiber Reinforced Nylon Composites Using In-situ Polymerization

玻纤增强尼龙插座注射模设计

Design of Injection Mold for the Glass Fiber Enhanced PA Plug

高抗冲玻纤增强尼龙-66的研制

Preparation of Glass Fiber Reinforced Nylon 66 with High Impact Strength

竹纤维增强尼龙复合材料动态机械热分析

Dynamic Mechanical Thermal Analysis of Nylon Composite Reinforced with Bamboo Fiber

钛酸钾晶须增强尼龙66时的偶联与造粒

Coupling and pelleting of potassium titanate whiskers for reinforcing nylon 66

四脚状氧化锌晶须增强尼龙6复合材料的研究

Study of Nylon-6 Composites Reinforced by Tetra-pod Like Zinc Oxide Whisker

阻燃增强尼龙66的抗粘锡性能研究

Study on the anti-adhering tin of flame-retardant and reinforced nylon 66

连续玻璃纤维增强尼龙的介质腐蚀效应

Study on behaviors of continuous glass-fiber reinforced Nylon in corrosive medium

玻纤增强尼龙6材料环境吸湿老化研究

Study of Aging of Environmental Moisture on Reinforced Polyamide 6

无卤阻燃玻纤增强尼龙6的性能研究

Study on Properties of Halogen-Free Flame Retardant Glass Fiber Reinforced Polyamide 6

增韧增强尼龙各组份的协同效应

The Synergism of the Components in Toughened and Reinforced Nylon

抗冲增强尼龙66工程塑料研究

Study on the impact & resistant and reinforced polyamide 66 Engineering Plastics

玻纤增强尼龙在机床电器线圈骨架上的应用

The application of fiberglass & reinforcer nylon to bobbins on machine tools

碳纤维和二硫化钼混杂增强尼龙复合材料的摩擦学性能研究

Tribological properties of hybrid carbon fiber and mos_2 Reinforced Polyamide 1010 composites

增强尼龙机械性能和热性能的研究

A Study of the Mechanical Property and Thermal Performance of Reinforced Polyamid

混杂短纤维增强尼龙1010的热水老化

Effects of hot water immersion on hybrid short fiber reinforced nylon 1010