型式试验

  • 网络Type test;type testing;TTA
型式试验型式试验
  1. C型列车头两列车已在试验线上进行了型式试验和功能试验。

    Type test and functional test have been done to the first two trainsets of C type vehicle .

  2. 目前GIS的型式试验、出厂试验和现场交接试验都要求进行局部放电试验。

    At present GIS requires to do the PD test in the type test 、 factory test and field test .

  3. MATLAB软件在串补电容器型式试验检测系统中的典型应用

    Typical Application of MATLAB Software Used in the Measurement System of Type Test of the Series Capacitor

  4. OPC技术在电梯控制柜型式试验中的应用

    The Application of OPC Technology in Elevator Control Cabinet Type Testing

  5. 参与PCB的型式试验。

    Participate in PCBs type testing .

  6. 该转向架经过了型式试验及运行考核,已经安全运行了50万kM。

    The bogie has passed the type test and running examination , covering a safety operation of 500 000 km .

  7. 最终通过以上工作设计实现了一种新型的基于FPGA的谐波测量仪,该仪器的变送单元和采样单元通过实际型式试验检验,符合设计要求。该仪器的FPGA单元通过系统仿真,符合设计要求。

    Finally an new type harmonic analyzer base on FPGA are design base on those works , and meet the requirement of the custom .

  8. 基于Windows操作系统的交流电机智能型式试验控制系统的的硬件可分为前向通道和后向通道两个部分。

    The hardware of the AC motor intelligent type-tested control system based on the Windows operating system , is consisted of the forward channel and the backward channel .

  9. 对非重复充装瓶阀的技术要求和型式试验采用的国家标准(GB)和欧洲标准(EN)进行了比较分析。

    This paper analyses the specification and type testing of cylinder valves for non-refillable cylinders at home and abroad .

  10. MCGS组态软件在疏水阀型式试验数据采集系统中的应用

    MCGS application of data acquisition system in steam trap experiment

  11. 不同极数的同一壳架等级塑壳断路器3C型式试验项目的研究

    Research on Testing Item of Moulded Case Circuit-Breakers with Different Poles in Same Frame Size in 3C Certification

  12. 执行10KV真空断路器出厂试验和型式试验;

    Execute COA and comprehensive test for10KV circuit breakers ;

  13. ±500kV高压直流输电(HVDC)换流阀绝缘型式试验是目前国际上最高电压等级的换流阀绝缘试验。

    The valve insulation type test of ± 500 kV HVDC power transmission is the test of highest voltage grade now on the world .

  14. 通过分压电阻的选择及结构设计研制成10kV电阻式电压互感器,型式试验验证达到0.2级准确度。

    Sample transformer of 10 kV was made and passed all tests . The precision is rank 0.2 .

  15. 基于以上原因,本文设计开发一套基于PC的电缆半导电屏蔽电阻率测试系统,用于对成品电缆的电气型式试验中半导电屏蔽电阻率的测量。

    Based on such reasons , this paper designs a test system used to effectively measure the resistivity of the semi-conductive shield in electric type approval test , which is based on Virtual instrument ( for short VI ) about the resistivity of the semi-conductive shield .

  16. 简述了C-GIS产品及内部元件的型式试验项目,证明本产品的研制是成功的。

    The type test items for C-GIS and its internal elements are introduced to prove that the development is successful .

  17. 型式试验及线路运行实践证明该单元制动器能够满足O′ZBEKISTON型机车的运用要求。

    The test results prove that this unit brake is qualified for running requirement of type O ′ ZBEKISTON locomotive .

  18. 考虑到现代电机试验系统模块化、虚拟化和操作人性化的发展趋势,本论文利用Borlandc++Builder工具开发了电机型式试验系统的上层软件。

    As regard to the requirement of modularization 、 virtualization and GUI within modern electrical motor test systems , this paper develops the electrical motor test system software by use of Borland C + + Builder under Windows environment .

  19. 西安西电电力电容器有限责任公司所研制的1000kVCVT样机已于2006年12月完成了所有的型式试验(包括抗震试验),并通过了技术鉴定。

    The prototype of 1000 kV CVT made by Xi'an Xidian Electric Power Capacitor Co. had been completed all type tests including anti-seismic test in December 2006 , and passed through technical appraisement .

  20. 本文介绍一种符合国家标准,采用国产元器件的大容量双回路双层高压开关(10KV)的研制情况及型式试验数据,以及在贵溪冶炼厂总降压变电站扩建工程中的应用情况。

    This article describes the developing of large volume high pressure switch ( 10kv ) with double circuit and double layer and some testing data , followed by its application into the transformer substation expansion in Guixi Smelter .

  21. 介绍了两种126kV敞开式组合电器的适用环境条件与技术参数、总体结构与布置、主要型式试验及主要特点。

    Introduces the appropriate of environment and technology parameter , allover structure and arrange , main model test and main characteristic of two types 126 kV the open combination appliance .

  22. 介绍了国内工业用非重复充装焊接钢瓶型式试验的要求和主要项目,并与欧盟标准EN12205-2001及美国标准DOT-39在材料要求、爆破试验、跌落试验和压扁试验等方面进行了比较。

    Type experiment requirements and main items on nor-refillable steel welded cylinder for industry cylinder and main items are introduced , and comparison are made on material requirements , explosive test , fall down test and flattening .

  23. 低压电器的可靠性试验与型式试验技术

    Technology of Reliability Test and Type Test on Low Voltage Apparatus

  24. 异步电动机型式试验数据处理系统

    The type - test data processing system of asynchronous motor

  25. 蒸汽疏水阀型式试验自动测试系统的开发和研究

    The Design and Research of Automatic Test System in Steam Trap Experiment

  26. 扣件式钢管脚手架杆件接头型式试验分析初探

    An analysis of the experiment in JOINT-TYPES of buckle-type steel tubular scaffolding

  27. 波纹管膨胀节型式试验中平面失稳试验方法的讨论

    On the Discussion about Budding Test of Bellow Expansion Joint in Type-test

  28. 非重复充装瓶阀技术要求和型式试验标准分析

    Comparison and analysis of specification and type testing for non-refilled cylinder valves

  29. 这类准则是腿机构必须满足的.起重机械型式试验注意事项

    On of the leg . Cautions in Type Test of Lifting Machinery

  30. 液压缸型式试验台液压系统基本原理,试验台结构组成设计。在液压缸试验中取得良好的效果。

    The fundamental of cylinder hydraulic system , and the design of configuration .