固溶

V2O5/TiO2界面固溶过程的红外特征

Infrared characteristics of the formation of v_2o_5 / tio_2 solid solution

高Al含量的树枝状α相，Al含量达到47.56%，远远超过了Al在Mg中的平衡固溶极限12.7%。

Aluminum content of dendritic α - Mg phase reached 47.56mass % , which largely surpassed the the maximum solid solution of aluminum in magnesium : 12.7mass % .

含N稀土－黄长石固溶体

Rare Earth Element N-containing Melilite Solid Solutions

PrOy-ZrO2固溶体的结构表征和CO氧化性能

PrO_y-ZrO_2 Solid Solution : Characterization and Catalytic Oxidation of CO

Cu掺杂的CeZrO2固溶体的制备及其催化燃烧芳香烃

Preparation of Cu-Doped CeZrO_2 Solid Solution and Its Catalytic Activity for Aromatic Hydrocarbon Combustion

Al含量对Fe－Al无序固溶体性能的影响

Effect of Aluminum Content on the Properties of Disorder Solid Solutions in Fe-rich Fe-Al Alloys

纳米晶Ti（C，N）固溶体粉末的制备及组织结构研究

A study of preparation and microstructure of nanocrystalline Ti ( C , N ) solid solution powders

结构的单一固溶体相，其晶胞常数随Mn含量的增加而逐渐减小。

Structure and the lattice constant reduces with the increase of manganese content .

掺ZnO快烧波特兰水泥熟料形貌及ZnO固溶情况的研究

A study the pattern and ZnO solubility of Quick - burning adding-ZnO Portland clinker

低能离子束方法制备重掺杂Fe的Si∶Fe固溶体

Si ∶ Fe Solid Solution Heavily Doped with Fe Prepared by Technique of Low Energy Ion Beam

研究了固溶时效和快速凝固时效工艺对CuCrZrMg合金的显微组织、硬度和导电率性能的影响。

The effects of different solution methods on aging properties of Cu-Cr-Zr-Mg Alloy have been studies .

MgO主要固溶于中间相和玻璃体中；

MgO mainly dissolves into middle phase and glass phase ;

研究还表明：快凝合金急冷态组织为过饱和Al基固溶体，无其它相存在；

The microstructure of the as spun alloy was in supersaturated solid solution state and no second phase in Al matrix .

水热条件下形成的PLZT固溶体的X射线分析

X-ray Analysis of PLZT Solid Solution Formed under Hydrothermal Conditions

Ti（CN）基金属陶瓷合金化后粘结相中固溶元素的定量测定

Quantitative Determination of Solid Solution Elements in Binder of Ti ( CN ) Ceramic-metal

稀土金属兼具高的固溶强化参数和沉淀强化参数，是强化Au与Au合金的重要合金元素。

The rare-earths have both parameters of high solid solution strengthening and high precipitation strengthening .

部分W原子扩散到ZrC点阵中，形成了（Zr，W）C固溶体；

A ( Zr , W ) C solid solution zone is formed in ZrC .

而Mo固溶于基体铁对摩擦材料起到了固溶强化的作用，提高了材料的强度硬度。

The solution of Mo in a-Fe can strengthen the friction material and increase the intension .

Sialon固溶体Z值与晶粒状态的相关性

Relationship Between Growth State of Sialon Grains and Its Solid-Solubility

研究表明，Fe（72）Al（28）混合粉在MA过程形成Fe（Al）过饱和固溶体。

The results show that the supersaturated Fe ( Al ) solid solution was formed during the milling the Fe_72-Al_28 powder .

湿-干法合成超细颗粒PZT固溶体粉料及陶瓷

Preparation of Super-fine PZT Powder and Ceramic by Wet-dry Method

固溶温度对含Mo量高的合金耐蚀性影响不大。

Solution temperature seems to hardly affect the corrosion resistance of the alloys with high Mo content .

高于γ′相固溶温度热处理时，弥散分布MC型碳氮化合物阻碍晶粒长大；

The dispersed MC-type carbonitrides inhibit grain coarsening during solution treatment above γ′ solvus temperature .

Cu含量对Al-Mg-Si合金固溶处理行为的影响

Effect of Cu Content on the Behavior of Solid Solution Treated Al-Mg-Si Alloy

而且稀土元素Gd，Y在固溶处理过程中也同时参与了氧化过程。

In addition , during solution , Gd and Y were also oxidized .

微量固溶Nb在钢中的作用

Effect of Micro Nb Soluted in Steel

Co、Cr元素部分溶入固溶体，部分与Mo、Be形成化合物。

The element Co and Cr are partly dissolved in solid solution and partly to form compound with Mo and Be .

X射线衍射法测定FeAl2O4在MgAl2O4中的固溶量

Determination of solid solution content of FeAl_2 O_4 in MgAl_2O_4 by X-ray diffractometry

粉末X射线衍射结果表明随着x值的增大，固溶体AMT晶格常数线性增大、热稳定性越高。

The results indicate that with the augment of the x values the crystal lattice constants and thermal stability increased .

EuSr（2-x）BaxRuCu2O8体系的固溶性和物性研究

Study on Solid Solution and Physical Properties of EuSr_ ( 2-x ) Ba_xRuCu_2O_8 System