吹膜

研究了聚乙烯醇（PVA）改性及吹膜技术。

Modification of PVA and blown film technique for it were studied .

同时该母料也可用于一般吹膜产品的生产。

EC32B also can be used to produce blown film products .

DSP技术在吹膜机故障早期预报及定位检测中的应用

The Application of DSP to Fault Infant Predication and Train Detection for Co - Extrusion Blown-Film Line

有机氟加工助剂对LLDPE吹膜工艺和性能的影响

The Effects of Organic Fluoride Processing Aid on the Technology and Performance of LLDPE Blown Film

作者在Pearson和Petrie等人研究基础上，建立了吹膜理论数学模型。

A mathematical model in the Film Blowing Process is established on the basis of the results Pearson 's and Petrie 's investigations .

将三种光敏剂分别与LLDPE进行共混密炼后吹膜，并对制备的薄膜试样进行性能检测。

Three kinds of photosensitizers with LLDPE were mixed in the banbury mixer separately , then the LLDPE film blown by the plastic film blowing machine , and then the performance of specimen was tested .

使用电磁动态吹膜机组加工m-PE-LLD薄膜，将振动力场引入到塑化挤出的全过程，考察了振动力场对m-PE-LLD薄膜拉伸强度的影响。

The extrusion of m-PE-LLD blown films was carried out in the presence of vibration field on an electromagnetic dynamic extruder .

综述了高密度聚乙烯（HDPE）的性能特点和其在注塑、吹塑、吹膜和管材四个主要应用领域方面专用料的市场供需状况及今后的发展建议。

The capability characteristic of high-density polyethylene ( HDPE ) and the supply and demand on the market in four basic applied fields of injection moulding , blowing moulding , blown-film and piping were described . Some suggestions for development of HDPE specialized materials were put forward .

聚乙烯醇改性及吹膜技术研究

Study on Modification of PVA and Blown Film Techniques for It

吹膜法纤维素膜透水气性和取向结构的研究

Studies of water vapor transmission and orientation structure of cellulose blown films

不同类型吹膜级聚乙烯树脂结构与性能研究

Study on Structure and Property of Different PE Resins for Film Blowing

应用：吹膜，管材，线材，拉丝等。

Applications : Blowing film , extruded wire , extruded tube , etc.

吹膜法制备全生物降解农膜的研究

Studies on Full - biodegradable Films Modified by Blowing

吹膜过程多参数测控系统

The Multiple Parameters Monitoring System for Membrane Blowing Process

用有限元法对吹膜机头内熔体流动的速度场进行了模拟。

The velocity field in blown film die was simulated by FEM method .

单片机控制塑料吹膜机直流调速系统

DC Speed Governing System of Plastic Film Blower Controlled by Single chip Microprocessors

并讨论了影响树脂吹膜加工的流变学参数。

The effect of rheological parameters on film blowing of resins was discussed .

并为设计吹膜机头及辅助设备，提供了理论依据。

This paper provides theoretical references for designing blowing film die and accessory equipment .

纤维素溶液吹膜过程中拉伸黏度的测定

Experimental Determination of Elongational Viscosity during the Process of Blown Film in Cellulose Solution

塑料吹膜过程的热传递分析

Analysis of Heat Transfer in Film Inflation Process

平面螺旋式吹膜模头熔体流动特性的数值模拟

Numerical Simulation on Melt Flow Characteristic of Flat Spiral Type Die for Blown Film

挤出吹膜的进展

Advances On B low n Film Extrusion

大型吹膜机组插板的设计与探讨

Design and Discussion of Gusset of Large - size Extrusion Line for Blown - film

它没有料辊和可容纳下的权利吹膜线。

It has no infeed rolls and can fit right underneath a blown film line .

GB/T10004-1998耐蒸煮复合膜、袋塑料吹膜制袋生产线

Plastic film blowing and bag making line

聚乙烯醇吹膜加工性能研究

Study on Processability of PVA Blown Film

吹膜机头内熔料流动及冷却控制技术应用

Melt Flow in the Extrusion Die Head for Blown Film and Application of Cooling Control Technology

可通过吹膜、挤压铸造、溶液铸造或轧光工艺制造。

It can be made by blowing , extrusion casting , solution casting , or by calendaring .

机筒进料段开槽对吹膜有良好的效果；

The grooving in the feed zone on the barrel had a good result for blown film .

对操作参数进行优化调整后，大幅度改善了吹膜工艺中存在的薄膜褶皱多的问题。

The problem of crease in the inflation film process was improved significantly by adjusting the operation parameters .