密封胶

PVC密封胶的研制

Development of PVC sealant

纳米SiO2改性及纳米SiO2聚氨酯密封胶的制备

Modification of nano-SiO_2 and preparation of nano-SiO_2 / polyurethane sealant

PVC汽车焊缝密封胶的研制

Preparation of a PVC sealant for using on the welding seam of the car cad

单组分湿固化PU密封胶在建筑工程防排水方面的应用

Application of One-part Moisture Curable PU Sealant in Building Waterproofing

江阴市森泰密封胶制造有限公司地处中国人均GDP排名第一的县级市江阴市。

Our company locates in Jiangyin city which takes the first place in average GDP in China .

PVC塑溶胶配制的密封胶具有单组分、无溶剂、贮存稳定及弹性好、耐化学介质优良等特点。

The fluid sealant formulated with PVC plastisol has the good characteristics of mono component , non-solvent , storage stability .

用于中低压的Ns复合密封胶的研制开发与应用

Development and application of NS combination sealing compound for use in low and median pressure

单组分遇水膨胀PU密封胶的研制和生产原位合成丙烯酸盐改性氯化聚乙烯制备吸水膨胀橡胶的研究

Study and production of a one-part PU hydrophilic expansion sealant Study on water-swelling rubber with CPE modified by in situ formed acrylate

改性纳米CaCO3对RTV硅密封胶性能的影响

Application of modified CaCO _ 3 in silicon sealant

时间对缩合型RTV有机硅密封胶硬度的影响

The Effect of Storage Time on the Hardness of Condensation-Type RTV Silicone Sealant

PV聚氨酯密封胶在高寒地区水泥混凝土路面的应用

Discussion on the Application and Construction Technology of PV Polyurethane Seal Glue in Joint Maintenance of Concrete Pavement in Highly Cold Area

本文叙述了当前GY系列厌氧性密封胶的技术与产品发展概况。

In this paper , the present situation of technical develpment and products of anaerobic adhesive series GY was introduced .

本文主要介绍了聚硫中空玻璃密封胶的构成、固化机理、制备方法，适用期对聚硫中空玻璃密封胶施工性能的影响，以及温湿度、B组分的用量对其硫化性能的影响。

Composition , curing mechanism , preparation of the sealant for polysulfide hollow glass , effects of pot life onits application property and effects of temperature , humidity , dosage of component B on its curability were presented .

研究了不同类型的有机硅密封胶对PE、PP材料的粘接性能，结果表明交联剂和界面因素是影响有机硅密封胶粘接性能的主要因素。

The bond properties of different silicone sealants to PE and PP materials were studies . The results showed that the crosslinkers and interface conditions were the key factors of bond properties .

硅烷基聚氨酯（SPU）双组份弹性密封胶的研制

Development of two-component silane-terminated PU elastomeric sealants

HZ-1耐油RTV密封胶的研制及应用

Investigations and Applications of HZ-1 oil Resistance RTV Sealant

PTMG型聚氨酯密封胶筒的研制

Development of PTMG-type Polyurethane Airproof Canister

随着相对湿度的增加，脱酸型和脱醇型（填料为SiO2）有机硅密封胶的表干时间缩短、消粘时间延长、硫化深度增加；

For acetic cured and methanol cured products with SiO_2 filler , higher relative humidity shortened the surface drying time , extended the tack-free time and increased the cured depth .

根据我国重载荷、温度高、压力大的密封需要，无锡县胶粘剂厂，试剩出HZ&1耐油RTV密封胶。

According to the needs for sealing at high temperature , pressure and loads , the plant developed HZ-1 oil resistance RTV sealant .

在普通汽车用PVC塑溶胶的基础上，利用氯乙烯-醋酸乙烯共聚糊树脂（PVCAc）对塑溶胶进行改性，获得了在室温约20~100℃较宽温域内具有较好阻尼性能的密封胶。

A automobile sealant , with excellent damping property in quite a wide temperature range from 20 ℃ to 100 ℃, was derived from the modification of PVC plastic sol , on the basis of general automobile PVC plastic sol .

ZY-2指压密封胶的研制十二指肠血管压迹的影像学观察

Study on the ZY-2 Sealant Imaging Observation of Vascular Impression of Duodenum

通过溶胀实验和动态力学性能分析，讨论了增塑剂对SPU密封胶的溶胀性能、增塑效率以及力学性能的影响。

Effect of plastifiers on compatibility , plasticizing efficiency , mechanical properties of SPU sealants were discussed by swelling test and dynamic properties analysis .

DH-2点焊密封胶的研制及应用

Prepare and Application of DH-2 Welding Sealant

D-263汽车用点焊密封胶的研制和应用

Development and application of D-263 spot welding sealant for automobile

J-208厌氧型螺纹锁固密封胶的研制

Development of J-208 anaerobic adhesive for thread locking and sealing

ZY-2指压密封胶的研制

Study on the ZY-2 Sealant

SJK1500是一种单组份聚氨酯胶粘接密封胶，触变型。

SJK1500 is a one-part , thixotropic , polyurethane based adhesive and sealant .

新型建筑密封胶JJ-1的研制

New JJ-1 Sealant for Construction

介绍了制备工艺及国产BS-8型丁基密封胶的性能特点。

The preparing process and the characteristics of the domestic BS-8 type butyl rubber sealant were introduced .

考查了相对湿度对不同硫化体系、不同填料体系的单组分室温硫化（RTV-1）有机硅密封胶硫化性能的影响。

The effects of the relative humidity on the vulcanizing properties of one-component RTV-1 silicone sealant in different curing system and with different filler systems were discussed .