同轴度

  • Coaxiality;concentricity;axiality;proper alignment
同轴度同轴度
  1. 工件机壁孔之公差必须为H7,保证内外环较高同轴度。

    The rabbet for install the outer must be H7 tolerance , ensure a high axiality .

  2. 大型机械工件高精度同轴度误差测量的新方法

    A New Non-contact Method for Measuring Axiality Error of Large Parts

  3. 一种V形块测量同轴度的误差处理方法

    A error treating method for coaxality measuring with V-block

  4. 一个基于CCD的同轴度测量仪

    A CCD-Based Measuring Instrument of Coaxality Error

  5. 基于PSD技术的孔-孔同轴度测量仪的研制

    Developing a kind of PSD-based hole-to-hole proper alignment measuring apparatus

  6. 基于ActiveX和MPI测量注射成型制品的平行度及同轴度

    Measuring parallelism and coaxiality of injection molding products based on ActiveX and MPI

  7. 一种基于LVDT的新型同轴度快速测量装置

    A Novel And Fast Coaxiality Measuring Device Based On LVDT

  8. 基于PC-DMIS的同轴度检测方法研究与应用

    The Proper Alignment Examination Method Study and Application Based on PC-DMIS

  9. 2t叉车液压泵齿轮箱传动轴装配同轴度的质保体系

    Quality assurance system for assembly coaxial degree of transmission shafts and gearbox of 2 t forklift truck ′ s hydraulic pump

  10. 介绍一种用于大孔同轴度测量的激光准直系统,该系统主要由单模尾纤半导体激光二极管、面阵CCD探测器、图像卡、以及计算机组成;

    A fiber pigtailed semiconductor laser collimating system designed for use in coaxiality measurement of large scale holes is introduced . This system is mainly composed of a pigtailed laser diode , a CCD detector , an image card and a computer .

  11. 为了减小加工工艺对EP阀工作性能的影响,磁铁和阀罩的同轴度应控制在8级,铁芯外径表面粗糙度应抛光至0.8μm。

    In order to lessen the effect of the machining process , the coaxality between valve head and iron core and surface roughness of iron core should be controlled within level 8 and 0.8 m respectively .

  12. 远距离孔系铅锤同轴度检测中的图像处理

    Image Processing in Measurement of Plumbing Coaxial Error for Long-Distance Orifices

  13. 保证压路机铰接机构同轴度精度的工艺方法

    Process to Ensure the Coaxial Accuracy of Articulation Mechanism on Compactors

  14. 模具结构及整形方式对轴承同轴度的影响

    Influence of die structure and coining mode on coaxality of bearings

  15. 材料试验机受力同轴度测量技术的发展

    Development of measurement technique of forced coaxality for material testing machine

  16. 一种检测导电式三维触发测头同轴度的新方法

    A New Way of Coaxality Inspection for 3D Electric Trigger Probe

  17. 测量多孔同轴度时孔径变化的影响与分析

    Influence and Analysis of Hole Diameter Variations when Measuring Multi-hole Coaxality

  18. 一种大轴同轴度测量方法的研究

    The study of coaxial error measuring method for big axis

  19. 同轴度误差最小包容圆有限元后处理算法

    Minimum circumscribed circle finite element post-processing algorithm for coaxial error

  20. 远距离孔同轴度测量误差探讨

    A discussion of measurement errors of coaxiality of long-distance bores

  21. 三坐标测量机同轴度误差检测功能的开发

    Development of Coaxality Error Test on the Coordinate Measuring Machines

  22. 同轴度误差的解析评定与几种计算机算法

    The Analytical Evaluation of Coaxality Error and Some Algorithms with a Computer

  23. 基于LD/PSD的激光同轴度校正技术研究

    Research on Coaxiality Calibration Technology Based on LD / PSD

  24. 对同轴度基准及其公差值选择的探讨

    Discussion on Selecting Base line and Tolerance of Coaxial Level

  25. 封隔器同轴度计算机辅助检测系统研制

    Development of Computer-assisted pressurized partition implement proper alignment measuring system

  26. 用定位最小区域法评定同轴度误差的微机处理程序

    Microcomputer Processing Program to Evaluate Coaxiality Errors by Located Minimum Area Method

  27. 一种可消除安装误差影响的激光同轴度测量方法

    A Kind of Coaxiality Measurement Method Unaffected by Installation Error

  28. 三坐标测量机测量圆度同轴度误差初探

    Preliminary Research on Concentricity and Roundness Error Measurements by Three-coordinates Measuring Machine

  29. 介绍了孔间同轴度误差的测量,计算方法,可供箱体类零件镗孔加工和检测时参考。

    Measuring and computing methods of the deviation are introduced .

  30. 柴油机主轴孔、凸轮轴孔同轴度探讨

    Study of Coaxality of Main Spindle Hole and Camshaft Hole