反推

磁悬浮系统的基于RBF网络的自适应反推控制

Adaptive Backstepping Control Using RBF Networks for Magnetic Levitation Systems

针对一类磁悬浮系统，研究了基于RBF网络的自适应反推控制器的设计和分析问题。

For a class of magnetic levitation systems , the problem of the design and analysis for adaptive backstepping controller based on RBF networks is studied .

超声波电动机的反推自适应PID控制

Adaptive PID Control For Ultrasonic Motor Based on the Backstepping Method

公交线路OD反推的结构化模型研究

Structural model of OD matrix estimation on route public transport flow

多路径OD矩阵反推下的路阻函数标定方法

Method of Link Performance Function Calibration in Multi-path OD Matrix Back-calibration

此后学术界提出了通过路段交通流量反推OD矩阵的方法。

Then academic put it forward through road traffic flow .

OD反推理论应用中的关键问题研究

Research on Key Issues of OD Estimation Theory in Applications

基于多中心的公交客流OD反推法研究

Study on Bus Passenger Flow OD Matrix Estimation Methods of Multi-center Cities

基于公交客流OD反推的公交乘客乘车站数分析

Public Transport Passengers ' Boarding Station Counting Analysis On OD Matrix Estimation

本论文将反推技术和耗散性理论结合起来，研究了复杂动态系统的控制问题，主要包括：线性多变量系统的H∞控制的构造性设计；

Based on dissipative theory , the problems of H_ ∞ control and adaptive control for complex dynamic systems are investigated by using backstepping technique .

用于OD反推的路段交通量观测点设置研究

Research on traffic counting locations for OD matrix estimation

基于交叉路口的动态OD反推模型与算法研究

Study on estimation of Dynamic Origin-Destination flows for intersections

基于随机模拟的遗传算法在OD反推中的应用研究

Application of a Genetic Algorithm Based on Stochastic Simulation for Estimating Origin-Destination Matrices

涡轮机后特殊的燃气分配截流阀、燃气管线和燃气反推控制喷口系统被首次用于火箭E段的控制。

A system of special gas distribution throttles , gas lines and control gas-reaction nozzles behind the turbine was first used for control on unit E.

基于模糊路段流量的OD反推的不确定规划模型与算法研究

Uncertain programming model and algorithm for estimating origin-destination matrices based on fuzzy link flow

OD反推在公路工程可行性研究中应用的关键技术研究

Research on Key Technical Issues of OD Matrix Estimation Applied to Highway Engineering Feasibility Study

局域路网IO矩阵反推模型研究

Research on IO Matrix Estimation Model of Local Network

建立了锚杆轴力分布的高斯曲线模式，并且建议通过实测的资料反推高斯分布模式中的参数n。

Gauss distribution model for anchoring body 's axial force is put forward , the method of determination of parameter called ' n ' from the test data is also achieved .

交通配流是交通需求预测的最终归宿，也在OD矩阵反推过程中扮演重要角色。

Traffic assignment is the destination of traffic demand forecast , and plays important part in OD estimation .

根据大型活动局域背景OD矩阵推算特点，提出了两种由交通量反推OD矩阵的方法。

Base on local area network OD matrix estimation character , two OD matrix estimation methods were developed .

利用正交变换和反推技术提出了一种新的方法，并用这一方法研究了线性多变量系统的H∞控制问题。

The main contents and results are as follows : 1 . A new approach to H_ ∞ control of linear multivariable systems is proposed by using an orthogonal transformation and backstepping-like technique .

再次，考虑路段流量的区间不确定性，构建了区间OD反推双层规划模型。

Thirdly , considering uncertainty of interval link flow , an interval bi-level model is established to estimate interval OD matrix .

为解决腐蚀疲劳条件下无法由断口判读获得（a，N）数据集以确定裂纹扩展公式参数的问题，提出了确定疲劳裂纹扩展参数的寿命反推方法。

Since the ( a , N ) databank can not be easily obtained in corrosion fatigue , the method for determine the parameters of crack growth parameters in terms of fatigue life is presented .

基于平衡分配法的区域O-D矩阵反推技术

Technology for inverse deduction of O-D matrix based upon balanced traffic distribution

一类参数不确定Rossler系统的自适应反推混沌控制

Adaptive backstepping control of a class of uncertain parameters Rossler system

最后，对全文的研究工作进行了总结，对OD反推问题进一步的研究工作提出了一些设想。

Finally , the work of this dissertation is summarized and the prospect of further research in OD matrix estimation is also discussed .

由交通观测资料得到的路段交通量来推算OD量的所谓反推OD模式，正被广泛深入地进行着研究。

According to the road traffic obtained in traffic observation papers , the variable OD can be estimated , which has been studying broadly .

设计了静态多路径一次分配概率矩阵，采用了遗传算法，并运用矩阵理论设计了OD表反推计算程序。

A static multi-path matrix was designed . By the genetic arithmetic method , along with the matrix theory , the OD table was designed .

由p0和D0反推聚乙烯醇的起始数均聚合度（DP）0。

The initial number average degree of polymerization ( DP ) _0 , derived from the value of D_0 and p_0 is approaching to the value of ( DP ) _0determined by viscometric method .

结合板料成形过程的CAE技术，提出基于板料冲压成形FEM分析结果的毛坯形状反推算法。

The blank shape is an important factor in metal forming , a method to calculate the blank shape based on the results of FEM forming numerical simulation is developed in this paper .