双环戊二烯

  • 网络Dicyclopentadiene;dcpd;PDCPD;endo-TCD
双环戊二烯双环戊二烯
  1. 双环戊二烯型树脂(DCPD树脂)是一种低粘度树脂,具有较好的综合性能。

    DCPD resin is a resin of lower viscosity . It has better synthetical properties .

  2. 热聚法合成双环戊二烯石油树脂

    Synthesis of DCPD Petroleum Resin by Thermal Polymerization

  3. 裂解C5馏份热二聚制双环戊二烯

    Formation of Dicyclopentadiene by Thermal Dimerization from C_5 Fractions

  4. 丙烯酸双环戊二烯酯在UV固化反应中的FT-IR研究

    Investigation on UV curing reaction of dicyclopentadienyl acrylate by FT-IR

  5. 反应注射成型(RIM)用单体双环戊二烯的改性及表征

    Modification of dicyclopentadiene for reaction injection molding system

  6. 纳米SiO2负载12-钨磷酸催化双环戊二烯环氧化

    Epoxidation of Dicyclopentadiene on Nano-SiO_2 Supported 12-Tungstophosphoric Acid Catalyst

  7. 本文报导了由双环戊二烯为第三单体的三元乙烯丙烯共聚物(简称EPDM)的辐射交联。

    This paper reports the radiation crosslinking reaction of three-compo-nent ethylene-propylene copolymer ( EPDM ) .

  8. 采用Diels-Alder加成法制备了双环戊二烯型不饱和聚酯树脂。

    Dicyclopentadiene unsaturated polyester resin is prepared through Diels-Alder reaction .

  9. 介绍反应注射成型(RIM)工艺在热固性树脂PU,EP和热塑性树脂PA&6,双环戊二烯等领域的新发展。

    This thesis introduces the new development of the reaction injection molding technology in the field of thermosetting plastics PU and EP thermoplastics PA-6 and dicyclopentadiene .

  10. 采用形成共沸物的方法使双环戊二烯(DCPD)与水在较低的温度下共同气化,将水蒸气作为稀释剂引入DCPD的气相裂解过程中。

    Here , water vapor was introduced into the process of the vapor-phase thermal cracking of DCPD as the diluting agent .

  11. 该文对以双环戊二烯(DCPD)和乙炔为原料,经DielsAlder反应制备2,5降冰片二烯(NBD)的工艺进行了研究。

    2,5-Norbornadiene ( 2,5-NBD ) was prepared by the Diels-Alder reaction of dicyclopentadiene ( DCPD ) and acetylene in an autoclave .

  12. 用FT-IR对丙烯酸双环戊二烯酯(DCPA)中的丙烯酸双键和脂环双键在UV固化过程中和固化后的化学反应行为进行了研究。

    Reaction behavior of the acrylic and the cyclic double bond of dicyclopentadienyl acrylate ( DCPA ) during and after UV curing were investigated by Fourier-Transform-infrared ray ( FT-IR ) .

  13. 双环戊二烯(简称DCPD)是一种具有很大应用潜力的新型塑料材料,在汽车制造、家用电器、建筑等行业有典型应用。

    A new process for manufacturing thermally polymerized aromatic petroleum resins using crack C9 fraction which are rich of DCPD has been developed .

  14. 以环戊二烯基钠(CPD-Na)与氯醇橡胶(CHR)反应,制得了含CPD侧基和双环戊二烯交联的聚合物。

    The crosslinked rubber with dicyclopentadiene ( DCP ) crosslinkage was prepared by the reaction between the chlorohydrin rubber ( CHR ) and the cyclopentadienyl sodium ( CPD-Na ) .

  15. 从环戊二烯和双环戊二烯的利用、异戊二烯的利用、间戊二烯的利用以及C5石油树脂的利用等几方面分析裂解C5的综合利用。

    From the application of cyclopentadiene , dicyclopentadiene , isoprene and piperylene and the application of C5 petroleum resin , the paper analyzes the comprehensive application of cracking C5 .

  16. 聚双环戊二烯(PDCPD)是一种性能优异,具有广泛应用前景的新型热固性工程塑料。

    Polydicyclopentadiene ( PDCPD ) is a novel high performance thermoset plastics with widely application prospect .

  17. 研究了在酸性催化剂存在的情况下,双环戊二烯(DCPD)与苯酚反应制备苯酚树脂的工艺条件。

    The preparation process of phenol resin from dicyclopentadiene ( DCPD ) and phenol with the presence of acidic catalyst was studied in this paper .

  18. 双环戊二烯主要来自石油裂解制乙烯副产物的C5馏分和煤炭焦化副产物。

    Dicyclopentadiene ( DCPD ) mostly comes from the C5 fraction of by-product which is produced in the process of preparation of ethylene by petroleum cracking and by-product of the coal-coking process .

  19. 采用管式连续反应器及釜式间歇反应器对石油裂解C5混合原料中的环戊二烯(CPD)进行热二聚,生成双环戊二烯(DCPD)后进行分离。

    Isolation of CPD from C 5 which are side production of oil cracking by means of polymerizing into DCPD in tube continual reactors and kettle batch reactors was studied .

  20. MoCl5-AlCl3-AlEt3催化双环戊二烯的聚合反应研究

    Study on Polymerization of Dicyclopentadiene With MoCl_5 / AlCl_3-AlEt_3

  21. 其中双环戊二烯(DCPD)的EPDM的非牛顿性,较乙叉降冰片烯(ENB)的EPDM更为显著,这可归因于分子量分布及长链支化的不同。

    The experimental data showed that the non-Newtonian behaviour of DCPD-EPDM was more pronounced than that of ENB-EPDM , which was attributed to the differences in molecular weight distribution and long chain branching .

  22. 研究了采用水溶性铑膦络合催化体系对双环戊二烯的氢甲酰化反应,考查了反应温度、相转移剂CTAB、铑催化剂浓度等对反应的影响。

    The use of the water soluble rhodium phosphine complex for catalytic hydroformylation of dicyclopentadiene ( DCPD ) in two phase system was studied . The effects of reaction temperature , phase transfer agent ( CTAB ) and the concentration of rhodium catalyst were examined .

  23. 二氧化双环戊二烯环氧树脂(DCPDE)是良好的耐水耐溶剂的白色固体。

    Dicyclopentadiene dioxide epoxy ( DCPDE ) resins is an white solid which is water-resistant and insoluble in most organic solvents .

  24. 桥式四氢双环戊二烯(endo-TCD)的异构化产物金刚烷和挂式四氢双环戊二烯(exo-TCD)是两种重要的精细化学品原料。

    Both the adamantine ( ADH ) and exo-tricyclodecane ( exo-TCD ) are important fine chemical intermediates which can be prepared by endo-tricyclodecane ( endo-TCD ) isomerization .

  25. 从聚合机理入手,对反应注塑成型聚双环戊二烯(PDCPD)的合成方法、性能及用途进行了综述。

    Beginning from the polymerization mechanism , the present paper has reviewed method of synthesis , properties and application of polydicyclopentadiene ( PDCPD ) prepared by reactive injection molding ( RIM ) .

  26. 提取乙烯裂解副产物C5馏分中的双环戊二烯馏分,与裂解C9、C5馏分按不同配比混合,通过自由基聚合反应得到热聚型石油树脂,并确定了热聚型石油树脂的工艺参数。

    DCPD extracted from the by-product Cs of ethylene cracking blends with cracked C9 fraction , C5 fraction . and then the petroleum resin can be produced through free radical polymerization reaction , and the process parameter for petroleum resin of the thermal polymerization after reaction .

  27. 简述了国外双环戊二烯(DCPD)的应用,说明了加成水解法生产DCPD改性不饱和聚酯(UP)树脂的工艺技术、产品性能等,讨论了影响因素。

    The application of dicyclopentadiene ( DCPD ) was reviewed briefly . The technology for producing DCPD modified unsaturated polyester resin with addition - hydrolysis process was described . The factors affecting the properties , quality and appearance of the product were also discussed .

  28. 加入双环戊二烯(DCPD)进行改性,树脂的固化速度差异不大,但放热峰温度降低,树脂具有很好的韧性。

    Unsaturated polyester resin modified by dicyclopentadiene ( DCPD ) has same curing time but lower curing temperature and higher toughness compared to that of general resins . The amount of dicyclopentadiene is in the range of about 0.1 to 0.2 mole against the MA component .

  29. 首先,以丙烯酸和二氧化双环戊二烯为原料,反应生成二氧化双环戊二烯丙烯酸酯,再把硅烷偶联剂处理过的不同质量的纳米Si02粒子分散到该体系中,固化制得复合材料。

    First , the acrylic acid reaction with the dicyclopentadiene dioxide generated the acrylate , then the nano-SiO2 particles of different quality which is treated by silane is dispersion to the system , composites are got through curing .

  30. 实验表明,在343~473K温度范围内,过氧化二叔丁基、双环戊二烯和硝酸丙酯对受热温度和受热时间的变化较为敏感,热分解现象明显,热分解产物易于检测。

    Based on the experimental results , di butyl peroxide , di cyclopentadiene and propyl nitrate are found to be sensitive to the change of heating temperature and heating time , and their thermal decomposed products can be detected easily .