厚板轧机

这是我厂的双机架厚板轧机生产线。

This is our double - stand heavy plate mill line .

临钢3300mm中厚板轧机简介

Brief Description of 3 300 mm Medium and Heavy Plate Mill

中厚板轧机液压辊缝控制系统研究及其PLC实现

Hydraulic Roll Gap Control System of Plate Mill and its Development in PLC

动态设定型AGC在中厚板轧机上的应用

Application of dynamic setting AGC on plate mill

中厚板轧机液压AGC系统的动、静态品质分析

Analysis of Dynamic and Static Characteristics of Hydraulic AGC System for Medium and Heavy Plate Mill

介绍了中厚板轧机ACC水冷装置的设备组成及控制过程。

This article has described the constitution of the ACC water cooling system as well as the control process .

根据计算结果选取MAS轧制参数，在中厚板轧机上进行了现场生产试验，效果良好。

The experiments were carried out on a plate mill with parameters selected based on simulation results , and the results were satisfactory .

针对柳钢2800mm双机架中厚板轧机，自主设计开发了完整的LevelⅡ计算机控制系统。

An entire Level ⅱ computer control system for 2 800 mm medium and heavy mill of LISCO was independently designed and developed .

现场的在线应用结果表明：运用给出的辊缝设定模型，可以大幅提高中厚板轧机的辊缝设定精度，为厚度精度的提高和AGC控制打下了良好的基础。

On-line applications indicate that the gap-set model can improve the precision of set greatly and offer the base to thickness precision improvement and AGC system control .

基于GRNN神经网络的中厚板轧机宽展预测模型

Prediction Model of Width Variation of Heavy and Medium Plate Mill Based on Generalized Regression Neural Network

基于四辊中厚板轧机，分析了温度、头部沉入、AGC系统、压力传感器和展宽比对中厚板头尾厚度超差的影响。

For plate rolling mill , the influence of slab temperature , head end immersion at biting , use of AGC system , pressure sensor and broadening ratio on oversize in thickness of plate at head and tail ends is analyzed .

首钢新建3500mm中厚板轧机生产线采用自主设计开发的过程控制系统，在该系统中包括有轧件跟踪功能。

The process control system developed by us is used on new 3 500 mm Shougang plate mill . In this system , the plate tracking function is included .

本文简要介绍了舞钢新建3800mm中厚板轧机的产品方案、工艺平面布置和主要工艺装备水平，并论述了该生产线采用的主要工艺和先进技术。

This paper briefly introduces the product structure , plant layout and main installation level of the 3800 mm medium and heavy plate production line of Wuyang Iron and Steel Co. , Ltd. , and describes the main process and advanced technology of the production line .

控制冷却技术是生产高质量钢板的有效手段，为满足首钢3500mm中厚板轧机轧后控制冷却设备和工艺的控制要求，采用了基于西门子S7-400PLC的控制冷却基础自动化系统。

Controlled cooling is an efficient method for product improvement in modern plate production . To meet the control system requirements of the cooling control technical equipment in the 3 500 mm Plate Mill in Shougang Group , a basic automatic system based on Siemens S7-400 PLC is adopted .

中厚板轧机参数测量及其结果的应用

Parameter measurement of plate rolling mill and application of measured result

气雾式在线冷却装置在厚板轧机上的应用

The application of air-vapor tyre on-line cooling apparatus on plate mill

中厚板轧机轧制力测量传感器原理分析

Principle Analysis of Rolling Force Measure Sensor in Heavy Plate Mill

人工神经网络在中厚板轧机轧制力预报中的应用

Application of Neural Networks to Predict Rolling Force of Plate Rolling Mill

中厚板轧机轧后加速冷却装置循环水处理控制系统

Control system of circulating water plant for plate mill 's ACC device

中厚板轧机两侧刚度差异对辊缝设定的影响

Influence of Bilateral Stiffness Difference of Plate Mill on Gap-Setting

A3APC机在厚板轧机辊道中的应用

Application of A_3APC in Roller Table of Plate Rolling Mill

中厚板轧机轧辊断裂原因分析

Analysis of fracture causes of roll used in plate mill

1990年全国中厚板轧机生产技术研讨会

National Symposium on production and technology of plate mill 1990

中厚板轧机全自动轧钢控制功能的在线实现

On-Line Implementation of Full Automatic Rolling Control on Plate Mills in Tandem

四辊式中厚板轧机轧辊轴向窜动初探

Discussion on Axial Running of roll in 4 - high plate mill

中厚板轧机工作辊疲劳断裂测算算法研究

Algorithm study of fatigue fracture calculation for work rolls in plate mill

中厚板轧机无回缩变精度快速辊缝设定法

Retraction Less Variable Precision Gap Setting Method of Plate Mill

厚板轧机坯料设计专家系统

The expert system of slab design for heavy plate mills

厚板轧机支承辊的制造

The Manufacturing of the Backup Rolls for the Heavy Duty Plate Mill

中厚板轧机轧辊辊型算法探讨

Discussion on Algorithm for Roll Contour of Plate Rolling Mill