卷扬机

浅谈不同型号卷扬机在施工现场的应用

A brief talk on the application of various types of windlass in construction spot

本文的目的是解决卷扬机的重载起动，通过交-交变频的方法来实现。

But how to solve the windlass 's over landing starting is purposed and AC-AC variable frequency is given .

他会把钢丝绳拴在汽车底盘上，用卷扬机把汽车吊到运河岸上。

He would attach a cable around the chassis of the car and winch it up on to the canal bank

JK－D系列快速卷扬机系采用少齿差行星减速系减速，按扭电控卷扬；

High speed winch series JK D uses planetary reducer with less gear number difference and electric button control .

JTP电脑控制智能卷扬机是专门为建筑施工和安装工程物料的垂直运送而设计的施工设备。

JTP computer-controlled intelligent hoister is the construcion equipment specially designed for vertical transport of materials for construction and installation .

介绍了卷扬机大型粉末冶金含油轴承的研制过程。重点讨论了低温烧结铁基合金Fe－Cu－Me的物理力学性能、成形模具结构和制品的耐久性与可靠性。

The present poper has introduced the developing process of large type P / M oilless bearings used in winch and put an emphasis on the physical and mechanical properties of Fe-Cu-Me alloy sintered at low temperature , die structure for forming , and durability and reliability of products .

介绍了利用千斤顶、移运器、卷扬机及钢筋混凝土滑道等设备对24m预应力混凝土箱梁进行顶升、横移、存放的施工技术。

The paper introduces the jacking up , transverse shifting , and storaging of 24m PC box girder by using jacks , shifting device , winch and reinforced concrete slipway .

QT-25塔式起重机差动调速卷扬机的最优化设计

An optimal design for the speed regulator of the differential gear train of tower crane qt-25

通过对现有22.5t料车卷场机和鞍钢35t料车卷场机的结构特点进行比较，确定1高炉扩容后29.25t料车卷扬机的结构。

Through comparing the structure and characteristic of the 22.5t and 35t hoist carriage , the structure of 29.25t hoist carriage would be decided .

文章介绍了利用固定锚点和卷扬机牵引设备，通过简单的滑动方法，在两天之内把两座5000m3储罐顺利搬迁到800m远的地方，并且安全就位的工程实例。

Two 5 000 m3 storage tanks were successfully moved to the position 800m away and safely fixed within 2 days by simple sliding method with the aid of fixed anchor points and winch drag equipment .

少齿差建筑卷扬机的设计与加工

Design and manufacturing of the construction winch with differential gear drive

双驱动行星传动卷扬机多级优化设计

Multiple stage optimum design of winch with dual driven planetary gearing

包钢1高炉料车卷扬机的选型

Definition on hoist carriage of 1 # BF at Baotou Steel

卷扬机式钢筋冷拉机拖拉机空冷系统流场的数值模拟研究

Winch type cold-drawing machine Numerical Simulation on Tractor Air Cooler System

JK-D系列快速卷扬机的设计研制

Design and Development of High Speed Winch Series JK D

一种卷扬机自动定位停车控制装置的设计

A Design of Hoister with Auto Position Stall Control Unit

玛连尼MAP320沥青拌和设备卷扬机液压系统分析

Hydraulic system analysis of winch for Marini MAP 320 asphalt mixing plant

小型卷扬机卷筒强度的计算

Strength calculation of the drum of small type winding engine

自坑内取出之卷扬机，固定于水泥制展示台上。

The winch used inside the mine was took out for displaying .

双速传动行星齿轮卷扬机设计系统的软件开发

Software development of design system for double - speed winch with planetary gearing

高炉卷扬机大齿轮副振动及噪音分析

Vibration and Noises Analysis of the Big Gear Pairs of the BF Hoist

JK&1型建筑卷扬机是一种广泛使用于建筑行业的提升设备。

JK-1 hoists are widely used in architectural field .

双速卷扬机多流传动系统动力学建模及动态性能分析

Dynamic Modeling and Dynamic Analysis for Multi-Flow Transmission System of Double Speed Hoist

卷扬机传动轴的断裂分析

Failure analysis of the driven shaft in a hoister

建筑卷扬机的单片机控制系统设计

Control system design of hoisters based on single-chip microprocessors

卷扬机用蜗杆机构自锁能力分析

Analysis of the Itself Lock Ability for the Worm Gear Used the Hoist

预应力钢筋张拉设备卷扬机式钢筋冷拉机

Stretching equipment for prestressing reinforcement winch type cold-drawing machine

基于模糊逻辑的液压卷扬机故障诊断专家系统

Fuzzy logic based hydraulic winch fault diagnosis expert system

卷扬机冷拉钢筋工艺的控制技术

Control Technique of Cold Drawing Bar with Cable Hoist

卷扬机滑轮组系统在锅炉汽包吊装中的应用

Application of Windlasses and Pulley-block in Boiler Drum Installation