化学腐蚀

高密度反应烧结SiC的耐化学腐蚀性能

Resistance to Chemical Corrosion of High Density Reaction - bonded SiC

聚丙烯（PP）是汽车用塑料主要品种之一，具有密度小、性能/价格比高、耐热性优良、耐化学腐蚀及应力开裂等优点。

PP is one of main automotive materials , and has some advantages of small density , high performance / price ratio , heat resistance , chemical corrosion resistance and stress crack resistance .

选用耐酸碱的材料加工制成覆盖蹭，具有良好的抗化学腐蚀性能和良好的物理性能

The rubber cover , which is form resistant material . Has fine anti-chemical corrosiveness and good physical properties .

深振幅Al调制靶的化学腐蚀制备工艺研究

Aluminium target with deep amplitude modulation fabricated by chemical wet etching process

薄GaAs层化学腐蚀及它的表面结构

Chemical Etching of Thin GaAs Layer and Its Surface Structure

湿法化学腐蚀法估算GaN外延层中位错密度

Evaluation of Dislocation Densities in GaN Epilayers by Wet Chemical Etching

利用线形液膜的红外热像测定GaAs的湿法化学腐蚀启动时长

Duration of Startup of GaAs Wet Etching Measured by Infrared-Image of Linear Liquid Film

利用化学腐蚀金相显微镜法、扫描电子显微镜（SEM）能谱分析和X射线双晶衍射等方法观测了掺锗硅的原生晶体中缺陷及氧的沉淀的状况。

Crystal defects are observed by SEM and X-ray double-crystal diffraction , and oxygen content the crystals are measured by FTIR .

本文用化学腐蚀和透射电镜及其能谱分析研究了重掺Sb硅单晶中的氧沉淀。

The oxygen precipitation ( OP ) in heavily Sb-doped silicon crystal has been investigated .

介绍以氧化、扩散、光刻等现代半导体技术结合化学腐蚀工艺实现对Si片的定向自截止腐蚀，制备获得用于研究驱动光束不均匀性的自支撑Si平面薄膜的工艺。

The preparation process of thin silicon foil used to study the spatial nonuniformity in the laser driven intensity was introduced .

因此，本文采用化学腐蚀的方法，利用组分、浓度不同的腐蚀液对光纤Bragg光栅进行腐蚀，制作出不同锥度的锥形光纤Bragg光栅，并对这种光栅的传感特性进行了深入的分析。

The different cone-shaped fiber Bragg gratings is fabricated by chemical methods with different concentration of corrosion solution .

VAcBAMMA三元共聚乳液的研制及其耐化学腐蚀性

Preparation of VAC-BA-MMA Terpolymer Emulsion and Its Chemical Resistance

首先利用电化学方法在金电极上制备了ZnO纳米棒阵列，然后进一步通过化学腐蚀的方法得到了ZnO纳米管阵列。

The ZnO nanotube arrays were prepared by chemical etching of ZnO nanorods that were electrochemically deposited on the Au surface .

YBCO高温超导薄膜激光化学腐蚀进程的实验观测

Experiment of YBCO film of laser assisted chemical etching processes

聚丙烯（PP）由于具有价格低、原材料丰富、力学均衡性好、耐化学腐蚀等特点，近年来成为最热门的汽车零部件材料。

For many advantages of polypropylene ( PP ), so it is become the best part material for auto in recent years .

为了制备高性能铁电薄膜红外探测器，对Si微桥的湿化学腐蚀工艺进行了研究。

The Si micro bridge was fabricated by wet chemical etching technique in order to get good infrared thermal imaging system with ferroelectric thin films .

采用选择化学腐蚀将光致抗蚀剂光栅浮雕图形转换到GaAs（100）面衬底上。

The grating relief patterns of photoresist is then transfered to GaAs ( 100 ) plane substrate by preferential chemical etching .

本文采用掺钛化学腐蚀法制备出了发光稳定性和均匀性都较好的多孔硅（PS）。

Porous silicon ( PS ) with good luminescent stability and homogeneity was fabricated by using a novel titanium-doped stain etching approach .

随着化学腐蚀条件的不同，可生长出优先定位不同的ZnO（100）和ZnO（002）薄膜。

ZnO ( 100 ) and ZnO ( 002 ) films having different preferred orientations were grown according to the different chemical etch conditions .

水润滑条件下，摩擦表面产生了Si（OH）4反应膜，降低了磨损，主要是化学腐蚀磨损。

Under water lubrication , the film of Si ( OH ) _4 is found on the friction surface . The worn surfaces characterized by chemical fretting wear .

化学腐蚀法制作SERS活性衬底

Corrosion chemical etching making SERS pedestal

化学腐蚀和硫处理对InSb（111）表面的影响

Influence of chemical etching and sulfide treatment on insb ( 111 ) surfaces

EPDM具有良好的抗磨损和抗撕裂性能，以及优秀的抗酸碱化学腐蚀的性能。

EPDM has good abrasion and tear resistance and offers excellent chemical resistance to a variety of acids and alkalines .

SOI／SDB硅片化学腐蚀自停止减薄方法

The Self stop Thinning Method Using the Electrochemical Etching for the SOI / SDB Silicon Wafer

K9基片的亚表面损伤探测及化学腐蚀处理技术研究

Studies on subsurface damage detection and wet-etching process of K9 optics

XLPE绝缘比PVC绝缘具有绝缘强度高，抗老化，耐化学腐蚀及防水性能等优点。

XLPE insulation strength the PVC insulation to be higher than the anti-aging bears merits and so on chemistry corrosion and waterproof performance .

在运营期间，由于地基不均匀下陷、缩性形变、机械破损、化学腐蚀等原因引起HDPE膜渗漏。

In landfill operation period , the HDPE was also leaked because of the ground deformation , machinery breakage , chemistry corrosion reasons .

结论CAP具有急性化学腐蚀作用，严重者可以造成栓塞后动脉瘤模型的破裂。

Conclusions We think that acute chemical erosive effect of CAP was evident . A strong effect could lead to rupture of some of the CAP thrombosed aneurysmal models .

GaSb晶片低指数面的化学腐蚀

Chemical Etching on the Low-Index Faces of GaSb Wafers

PBT具有优异的机械性能、耐摩擦、耐化学腐蚀以及良好的电绝缘性能等优点，被广泛的应用于汽车、电子电器产业。

Now PBT has been widely used in auto , electronics and electrical industries due to its excellent tensile properties , high abrasion and chemical resistance .