凝胶化

nínɡ jiāo huà
  • gel forming
凝胶化凝胶化
  1. 从总体上看,鲢肉蛋白质在冰藏条件下较为稳定,保持较强的凝胶化能力。

    However , muscle protein of iced silver carp exhibited rather stable and showed high in gel forming ability .

  2. 分子内环化反应对凝胶化范围的影响(Ⅱ)AaBb,Cc型缩聚反应

    The Effect of Intramolecular Cyclization on Curing Region (ⅱ) A_a B_b , C_c Type of Polycondensation

  3. 明胶凝胶化过程中,明胶溶液的pH值对凝胶化过程也有影响。

    The pH value of the gelatin solution also has influences to gel gelation .

  4. UV辐照尼龙-6渔网材料的凝胶化改性研究

    Study on Gel-modification of Nylon-6 Fishnet Materials by UV Irradiation

  5. PVC凝胶化及其对制品力学性能的影响

    The gelation of PVC and its influences on the mechanical properties of products

  6. 溶液中不溶的PAn的存在会加速凝胶化过程。

    The insoluble fraction in the PAn solution could accelerate the gelation .

  7. 用Sol-Gel法制备负载型纳米TiO2薄膜的凝胶化条件

    The Gelling Stipulation of Preparing Loading Nano-TiO_2 With the Mathod of Sol-Gel

  8. PVC糊凝胶化性能的测定阻燃PVC糊的粘度和凝胶化性能研究

    The Determination of the Gelling Property of PVC Paste Study of Viscosity and Gelation of Fire-Resistant PVC Paste

  9. 聚丙烯酰胺(PAm)化学转化、凝胶化。

    Chemical modification on polyacrylamide ( PAm ) and gel formation is discussed .

  10. 本文研究纳米级CaCO3填充PVC糊的流变性能、存放性能及凝胶化性能。

    The rheological property , store property and gelation property of PVC pastes filled with nanometer CaCO 3 were researched .

  11. Gemini型硅溶胶凝胶化及应用

    Gelation Process of the Gemini Silica Sol and Its Application

  12. TD对PAM和HPAM凝胶化的影响

    Effect of Thiourea Dioxide on Gelatination of PAM and HPAM

  13. 凝胶化过程是增塑粘剂向PVC糊树脂颗粒内部扩散的过程。

    The gelation of PVC paste is a process during which the plasticizer diffused into the particles of PVC paste resin .

  14. 基于此,本文采用海藻酸钠-壳聚糖为壁材,乳化-内部凝胶化法对GOD进行微胶囊化包埋,从三方面改善GOD的改良品质。

    Based on this , we embedded GOD using emulsion-internal gelation method with alginate - chitosan as wall material , improving the quality of GOD from three respects .

  15. 水的存在加速了体系的凝胶化过程,表现为临界凝胶化转变时间tg的减小。

    The presence of water could accelerated the gelation process , reflected by the decreased critical gelation time tg .

  16. 用XPS方法求得聚偏氟乙烯的凝胶化剂量为1.59mrad。

    The dose of gelation of poly - ( vinylidene fluoride ) obtained by XPS is 1.59 mrad .

  17. 本研究采用紫外线(UV)对渔网材料尼龙-6纤维辐照,继而进行接枝AA的表面凝胶化改性研究,以制备一种能防止海洋污损生物附着的渔网材料。

    Nylon-6 fishnet materials were irradiated by UV , and grafted by AA to prepare a kind of anti-halobios coherence fishnet .

  18. 体系在低于其临界凝胶化转变温度Tg的某一温度下恒温熟化一定的时间会发生凝胶化转变。

    The system would gel after a certain period of aging at a constant temperature below its gelation temperature Tg .

  19. 用XPS方法求得FPI的凝胶化剂量为50Mrad。

    The gelation dose of FPI obtained by XPS method is 50 Mrad .

  20. 本文用电子加速器的电子射线研究了凝胶化剂量(Rg)之前辐照EVA时,辐照条件对其加工性能和物理机械性能的影响在Rg之前辐照EVA,不产生凝胶而降低M.I。

    The effect of irradiating EVA with electron beam , at less than the gel dosage ( R8 ), on processability and mechanical properties has been investigated .

  21. 粉云母纸组成对环氧TOA体系凝胶化性能的影响

    The influence of composition in powder-mica papers on gelation performance of the epoxy-toa system

  22. 提高温度有利于PCL的辐射交联,温度越高,凝胶化剂量降低,辐射交联GC增加,裂解与交联比率降低。

    The higher temperature is useful to radiation crosslinking , the higher the temperature , the lower gelation dose , radiation crosslinking Gc increases , po / qo decreases .

  23. 测定凝胶化的PVF缩醛度的新溶剂体系

    A new solvent system used to determine the degree of acetals of PVF

  24. 尿素和异丁醇被用于对凝胶化过程中CS和GP两组分间的相互作用进行考察。

    Urea and isobutanol were selected to assess the interactions between the two components during the gelation process of CS / β - GP system .

  25. 利用淀粉受热吸水溶胀和糊化的性质以及糊化后淀粉糊的凝胶化特性可实现Al2O3陶瓷浆料的近净尺寸原位凝固成型。

    It is concluded that Al_2O_3 ceramics can be consolidation in-situ formed , based on the gelling network of thermally swelled and gelatinized acetate starch .

  26. 粘度下降、粘度稳定性逐渐变好,有利于PVC增塑糊的排气性能提高,延长PVC增塑糊的凝胶化时间。

    The results show that the viscosity of PVC plastisol is decreased and the viscosity stability is improved when self-viscosity and the property of solution of PVC plasticizer are poorer .

  27. 该陶瓷在烧结过程中及高温下使用都伴随着SiC组分的氧化,从而影响陶瓷的烧结致密化并导致性能衰退。高温下淀粉的凝胶化作用

    Oxidation of SiC in ZTM / SiC ceramics occurs in t e process of sintering and t'e use at high temperature . Gelatinization Behavior during The High Temperature Process of Starch

  28. 水蒸汽和拟薄水铝石的凝胶化处理加速了Al2O3的烧结,并且削弱了BaO的高温稳定作用。

    The steam and pseudo boehmite gelation treatment will accelerate the sintering of Al 2O 3 and hence weaken the high temperature stabilisation effect of BaO .

  29. 应用Flory凝胶化理论和非平衡态热力学涨落理论对环氧树脂-三乙醇胺体系不同温度下的凝胶化时间tg和tg以后树脂体系的固化行为进行了预估。

    Flory 's gelation theory and the nonequilibrium thermodynamic fluctuation theory have been used to predict the gelation time tg and the cure behavior after tgt of epoxy-triethanolamine system at various temperatures .

  30. 用改进的晶格键渗流模型研究了溶剂对化学凝胶化过程的影响,引进紧邻不饱和单元相互作用参数Z来描述溶剂的品质。

    Effects of the solvent quality on the chemical gelation processes were studied by a improved lattice bond percolation model . A Nearest neighbour interaction parameter Z between unsaturated polymeric units were introduced to describe the solvent quality .