催化重整

介绍了催化重整工艺中HCl的来源与危害，讨论了脱氯剂在预加氢及重整氢和再生气脱氯中的应用及其特点。

The use of dechlorination absorbents in catalytic reforming process was necessary due to the formation of hydrogen chloride and its harmfulness .

DJ-3新型塔盘在催化重整脱水塔中的应用

Application of New DJ-3 Tray in Catalytic Reforming Dehydration Tower

甲烷催化重整制合成气反应的Ni基复合催化剂的研究

The Research of Ni Based Heterogeneous Catalysts for Synthesis Gas of Methane Reforming

Ni-Ce/Al2O3催化剂上CH4、CO2和O2催化重整制合成气

A Study of Ni-Ce / Al_2O_3 Catalysts for Catalytic Reforming of CH_4 , CO_ 2 and O _2 to Syngas

为适应加工高硫高氮催化重整原料和加大装置处理量的需要，石油化工科学研究院开发成功了高空速石脑油加氢精制催化剂RS－1。

A naphtha hydrotreating catalyst RS 1 was developed for processing high sulfur and nitrogen content reforming feedstock at high space velocity .

系统分析和研究了重整反应条件如重整反应温度、反应压力和催化剂装填比等对K的影响规律，为催化重整工艺的优化提供了一个理论依据。

Effects of reforming reaction temperature , reaction pressure and catalyst stacking ratio on the value of K were analyzed systematically , supplying theoretical basis for reforming process .

结果表明，CO2催化重整过程开发成功的关键是有效抑制催化剂积炭失活。

It is shown that the key to successful development of reforming processes is inhibition of coke deposition which causes deactivation of the catalyst .

PLS回归软测量方法在催化重整稳定油组分估计中的应用

Application of Soft Sensing Method Based on PLS Regression for Estimating the Stabilizing Oil Components of Catalytic Reform Reactor

采用用户模型技术，将自主开发的17集总反应动力学模型与aspenplus稳态流程模拟软件集成在一起，从而在aspenplus平台实现了包含重整反应装置在内的催化重整全流程模拟。

The industrial catalytic reforming process is simulated by developing the seventeen lumped kinetics model as a user module on ASPEN PLUS platform .

新开发的HDO18型催化重整生成油选择性加氢催化剂，以γAl2O3为担体，钯为活性金属组分并加有助剂。

The newly developed catalyst HDO-18 for reformate selective hydrogenation takes γ - Al 2O 3 as carrier , and palladium as active metal with co-catalyst is added .

Gd对催化重整反应有两方面影响：其一是与金属Pt相互作用增加活性中心、加强金属功能；

Gd may influence catalytic performance by two ways , namely , ( 1 ) the Gd in Pt Gd / KL increases mainly the active sites of catalyst and enhances the metal function of catalyst ;

HDO-18催化重整生成油选择性加氢催化剂的工业试验

Commercial application test of catalyst HDO-18 for reformate selective hydrogenation

改质后的环丁砜用于锦州石油化工公司300kt／a催化重整的芳烃抽提，表现出优良的选择性和稳定性。

The upgrading sulfolane shows superior selectivity and stability in the application of aromatics extraction of the 300kt / a reforming unit .

催化重整装置氯的腐蚀及脱氯剂CT-72的工业应用

The Industrial Application of Dechlorination Agent CT-72 in Catalytic Reforming Unit

CH4和水蒸汽首先在加热炉中发生催化重整反应，生成少量H2，再与空气预混后，在试验段出口处被热棒点燃。

The catalytic reform reaction of CH 4 and steam in the furnace produced a part of H 2 , then the pre mixture with air was ignited by a hot rod located inside the test tube .

NC-01颗粒白土在催化重整装置上的工业应用

Commercial application of NC-01 particulate clay in catalytic reformer

采用河北工业大学开发的新型大通量高效塔板&立体传质塔板（CTST），在石家庄炼油厂催化重整装置的芳烃抽余油分馏塔扩产技术改造中成功应用。

The combined trapezoid spray trays ( CTST ) developed by Hebei University of Technology have been successfully used in the technical transform of the reformer raffinate fractionating column in Shijiazhuang Refinery .

结合某炼油工程催化重整装置四合一炉炉管焊接施工要求，对炉管用钢的焊接性进行了试验研究，并进行了TIG焊和手工电弧焊的工艺评定。

An experiment study is made to the weldability of the steel of furnace tube in accordance with the welding requirements for the furnace tube of the 4-in-1 catalytic reforming equipment in the refinery engineering . The procedures of TIG welding and SMAW are also assessed .

采用我国自行研制的NIR-6000型多通道在线近红外光谱分析仪同时检测8套催化重整中型试验装置，实时测量重整生成油的RON和芳烃组成等5项物化指标。

The Pilot scale test of eight catalytic reforming units have been simultaneously monitored with the domestic NIR-6000 multiple-passage analyzer to measure five physical / chemical targets of the reformate ( RON , aromatics composition etc. )

本文采用两步共沉淀法制备了高稳NiO-MgO重整催化剂，以鼓泡流化床为重整反应器，对生物质气化粗燃气NiO-MgO催化重整制取合成气性能进行了研究。

The synthesis gas production via reforming of biomass raw fuel gas was investigated over NiO-MgO catalyst in a fluidized-bed reactor The NiO-MgO catalyst was prepared by the method of two Steps co-precipitation .

济南炼油厂0.15Mt/a催化重整装置采用两段混氢、4台反应器混装两种催化剂，并配有制氢系统为开工提供氢气。

In the 0.15Mt/a catalytic reformer in Jinan Refinery two-stage hydrogen mixing scheme was adopted and a hydrogen manufacturing system was provided to supply hydrogen for start-up purpose .

石脑油加氢脱砷剂解决了制备过程中的Mo-Ni共浸渍溶液配制的难题，具备了工业生产和工业应用的条件，可以应用于炼油厂催化重整石脑油脱砷生产装置。

We solved naphtha hydrogenation catalyst for de-arsenic Mo-Ni co-impregnation solution preparation process problems , so industrial production and commercial application of this catalyst for de-arsenic will become a reality , it can be used on catalytic reforming naphtha de-arsenic unit in refining plant .

甲烷二氧化碳催化重整制取合成气的研究进展

Progress in Methane Catalytic Reforming with Carbon Dioxide to Synthesis Gas

催化重整炉炉管的现场焊接技术与生产管理

Field Welding Technology and Management for Pipes of Catalytic Reforming Furnace

含约束条件遗传算法在连续催化重整优化操作中的应用

Optimization of Continuous Catalytic Reforming Based on Genetic Algorithm with Constrains

低压组合床催化重整装置的设计及考核

Design and running of reforming unit with low pressure combination bed

热管空气预热器在催化重整装置上的应用与改造

Application and Improvement of Hot Pipe Air Preheater in Catalytic Reformer

近期国外催化重整和芳烃生产技术的主要进展

Recent Principal Development of Foreign Catalytic Reforming and Aromatics Production Technologies

催化重整流程模拟及优化研究

A Study on Simulation and Optimization of Naphtha Catalytic Reforming Processes

催化重整乙烯的乙二醇-水逆流萃取物；

Raffinates , petroleum , catalytic reformer ethylene glycol-water countercurrent exts .