仿真方法

MATLAB的平磨工件表面三维模型仿真方法

MATLAB-based simulation method of surface 's three-dimensional model in grinding process

MATLAB环境下变论域模糊控制算法的仿真方法

Simulation Method of Variable Universe Fuzzy Control Algorithm on the Matlab

PWM开关功率变换器分析与仿真方法简述

A review on the analysis and simulation of PWM switching power converters

提出了适合国产TDICCD测绘遥感相机的成像仿真方法。

It was proposed for an imaging simulation method for domestic TDI CCD camera for mapping .

并且针对Petri网模型计算复杂的特点，介绍了一种新的Petri网仿真方法，即利用WITNESS软件对Petri模型进行仿真分析。

Since calculation of Petri net model is sophisticated , the Witness software is applied to simulation of the model .

本文提出了两种基于Vega平台红外多光谱图像仿真方法，均能得到不同季节、天气、时间等不同成像条件下的红外多光谱图像。

This thesis presented two infrared multispectral image simulation methods based on Vega platform .

系统级仿真方法与WiMAX仿真

System Level Simulation Methodology and WiMAX Simulation

网络仿真方法和OPNET仿真技术

Network Simulation Method and OPNET 's Simulation Technology

Vega中云的仿真方法

Cloud Simulation in Vega

针对传统的仿真方法在网络应用方面的不足，提出了用VRML来虚拟机构运动。

To overcome the shortcomings of using traditional solid models for network-based simulation , VRML was applied to realize virtual mechanism motion .

随后在对一般的无线信道仿真方法做仿真比较的基础之上，针对MIMO信道的相关特性，阐述了MIMO相关信道的仿真方法，并给出相应的仿真结果。

Basing on simulating and comparing some simulation methods about common wireless channel , a modeling method of MIMO spatial correlative channel is expounded in the article .

改进的Log-Normal分布杂波仿真方法

An ameliorated simulation method for the Log-Normal clutter

论文最后一部分在以前章节的研究基础上，使用混合仿真方法设计了一款芯片的ESD保护结构。

Based on the former investigation , one ESD protection structure is designed using the mixed-mode simulation in the last part of this dissertation .

基于DSRC性能仿真方法的车道设施配置设计

Lane configuration based on DSRC performance simulation

本文基于ANSYS环境提出一种船舶推进轴系动力学仿真方法，并首次探讨了主机在轴系动力学仿真中的影响。

This paper proposes a method of simulation of dynamics for propulsive shafting of ship by ANSYS . And it is the first time to discuss the effects of engine on simulation of dynamics .

PSAT软件的前向仿真方法

Forward Simulation Approach in the PSAT

本论文着重研究VSC-HVDC输电系统的数学建模、仿真方法以及其对交流输电系统暂态特性的影响。

In this dissertation , the mathematical modeling and transient simulation for VSC-HVDC , as well as the interaction between VSC-HVDC and ac system are studied .

最后针对一个简单的作战任务，从信息流的角度应用仿真方法对8种典型的C2组织结构进行了评价，仿真结果反映了C2组织结构的发展趋势。

Finally , in a simple operation task , eight kinds of typical C2 organizational structures are evaluated by the emulation mode . The results validate the developing trend of C2 organization structure .

基于运动捕捉数据的人脸动画仿真方法：基于对人脸不同功能分区进行模型驱动的思想，构建了基于径向基函数方法（RadialBasisFunctions，RBF）的交叉映射，实现了不同人脸模型的运动数据生成。

Simulation of facial animation based on facial MoCap data : Based on the idea of driving facial model from different functional regions , a cross-mapping algorithm based on radial basis functions ( RBF ) method is constructed for the generation of motion data for different facial models .

在调度员培训仿真器（DTS）中传统的自动装置仿真方法是对不同类型的装置分别建模，其缺点是适应性差、扩展性不强。

The traditional method of automation devices simulation in Dispatcher Training Simulator ( DTS ) simulates each type of devices respectively , which is proved inadequate as the devices become more diverse .

研究随机海浪仿真方法，建立船舶减摇鳍系统非线性仿真模型。其次，设计GA-FC控制器改善PID控制器适应性差的问题。

Study the stochastic ocean wave simulation method . The nonlinear model of ship stabilize system is built . Next , GA-FC controller is designed to improve the compatibility of PID controller .

介绍了基于最小割集的仿真方法的原理及其具体实现过程，并分析了它在柔性制造系统FMS（FlexibleMachingSystem）可靠性研究中的应用，最后用一个FMS的实例来验证该方法的正确性。

Introduces a new simulation method based on the minimum cut sets of fault tree , analyzes the way using the method in the research of the reliability of FMS , a case is presented to prove its correctness .

接下来又讨论了不同业务源（如CBR、VBR、ABR和UBR）的数学模型的建立及本论文所使用的仿真方法&离散事件系统仿真法；

Secondly , the mathematical modeling of the heterogeneous traffic ( such as , CBR VBR ABR and UBR ) and discrete event system simulation which is used in this paper are discussed ;

本文从选定测试电路开始，对故障集的选择、解决电路容差的MonteCarlo仿真方法、基于PCA的特征提取以及机器学习算法应用等进行了探讨，详细地阐述了每个环节是如何进行的。

Each of the components is discussed in detail : the selection of testing circuit , the selection of faults set , solving tolerance using Monte Carlo simulation method , feature exaction based on Primary Component Analysis and the selection of machine learning methods .

实验结果表明，基于xPC的转台控制器实时性能的半实物仿真方法可以方便地给出控制器的实时性能指标，同时也为基于PC的转台控制器软、硬件快速开发提供途径。

The experiment result shows that FMS controller 's real time index can be obtained easily by hardware-in-the-loop ( HIL ) simulation and that the simulation platform also provides a way for quick development of FMS 's controller based on PC.

基于信道的时域及频域特性，重点研究了基于Clarke参考模型的SISO信道建模仿真方法，采用一种高效仿真模型进行仿真分析，验证了采用这种建模方法建立Rayleigh衰落信道的正确性。

Based on the characteristics of time-field and frequency-field , we studied the SISO channel modeling . Analyzed the channel simulation method based on Clarke model . And we used one efficient simulation model to generate Rayleigh channel .

针对广义平稳非相干散射（WSSUS）多径时变信道，提出一种离散延迟-离散多普勒频率的频移滤波器组模型，并以此为基础提出一种时变多径信道仿真方法。

A " frequency shifted filter bank " model with discrete delay and discrete Doppler is derived for wide-sense stationary uncorrelated scattering ( WSSUS ) time-variant multipath channel , based on which a simulation method is constructed .

VHDL-AMS语言为模拟和混合信号系统设计提供了统一的建模和仿真方法，作为模拟电路中最为通用的单元，运算放大器的VHDL-AMS模型可以划分为输入级、中间级和输出级3个部分。

VHDL-AMS provides a uniform modeling and simulation method for analog and mixed signal system . As the most general unit in analog circuit , the VHDL-AMS model of operational amplifier can be divided into three parts : input level , middle level , and output level .

最后，用仿真方法建立了一个供应链集成化模型，并与分立模型进行了比较。

Last , build a integrated simulation model of Supply Chain .

提出了双锥节流装置和梭形节流装置数值模拟的正交实验分组仿真方法。

A means of grouping orthogonal experiment is presented for simulation .