互溶

hù rónɡ
  • mutually dissolvable
互溶互溶
  1. 用EXCEL实现部分互溶体系液液萃取工艺全程自动计算

    Auto Calculation of Liquid Extraction Proeesses for No-miscible System in Entail Using Excel

  2. 结果表明:Mg、Cu粉末在机械合金化过程中是互溶的,机械合金化可以大大提高它们之间的固溶度;

    The results showed that Mg and Cu powders could dissolve into each other and the dissolution degree became larger after milling .

  3. XRD物相分析证明产品为立方晶系的完全互溶取代固溶体。

    XRD phase analysis demonstrates that the compounds are mutually miscible in the solid solutions with cubic crystal structure .

  4. 其还是一种互溶性较好的钙钛矿铁电材料,其居里点温度Tc可较容易地调至室温附近,介电温度系数较大,是一种非常适用于电场调节元件的材料。

    Because of the expedient modulation of curie temperature Tc to room temperature , the larger dielectric-temperature coefficients , PST materials are favorable to be used in microwave tunable devices .

  5. 用AutoCAD处理完全互溶双液体系相图,不但准确而且方便快捷。

    With AutoCAD , processing phase diagram of complete mutual solution of two liquids attains both accuracy and facility .

  6. DuhemMargules公式在讨论完全互溶双液系PX曲线时的应用

    The Application of Duhem Margules Formula to P x Curves of Perfectly Miscible Liquid system

  7. 溶解实验表明:TPI和TPB在较高温度下能很好互溶;

    The solution test showed that TPI and TPB were compatible .

  8. Cu-Cr难互溶系机械合金化中氧化控制及介稳相形成

    Control of oxidation and formation of non-equilibrium phase in Cu-Cr alloys during MA

  9. 用膨胀仪、红外、应力-应变和DSC确定和测定其中的组分分离运动,阐述组分分离对互溶性的影响。

    Using the methods of dilatometer , IR , stress-strain curve , DSC , and electron microscopy , the components ' separation was found .

  10. 但由于W和Cu没有互溶性,很难生产出具有均匀微观结构的合金或复合材料。

    But it is difficult to fabricate alloy and composites with a homogeneous microstructure , because W and Cu have no solubility of each other through the whole composition .

  11. 研究发现,Ni/(Ti,Me)(C,N)体系的润湿机理是存在元素扩散与金属/陶瓷互溶的反应性润湿。

    It is also found that wetting mechanism of Ni / ( Ti , Me )( C , N ) system is virtually a process in which diffusion and dissolution of elements are characterized .

  12. 难互溶Cu-Fe系机械合金化的高分辨电镜研究

    High resolution electron microscopic study of immiscible Cu-Fe system during mechanical alloying

  13. 用NRTL方程预测部分互溶体系的汽液平衡

    Correlation and Prediction of Vapor-Liquid Phase Equilibrium by NRTL Equation for the Partially Miscible System

  14. 采用适合于部分互溶体系的NRTL模型作为精馏模拟计算的物性方法。

    The NRTL model is used to simulation calculated the distillation of the system of acrylonitrile-water .

  15. 研究了PMMA的旋涂成膜工艺,解决了层间互溶、应力开裂、光刻起皱等薄膜表面质量问题;

    The spin coating process of PMMA membrane is studied , and the surface-quality problems such as the dissolve among layers , stress crack and lithography crinkle are solved .

  16. γMn-Cu合金在(γ+α)亚稳互溶区时效过程Spinodal分解的热力学判据

    Thermodynamic criterion of Spinodal decomposition aging in the (γ+α) metastable miscibility gap in γ Mn-Cu alloys

  17. 因此,从水和汽油体系的互溶性来看,DMC和DEC都适合做汽油添加剂。

    In other word , DMC or DEC could be considered as a suitable alternative gasoline additive in the view of the intersolubility of water and gasoline .

  18. 同时,对Cu-Cr难互溶体系在机械合金化过程中饱和固溶体、氧化物非晶的形成以及氧化现象的控制进行了探讨分析。

    The phase transformation and oxidation control of Cu-Cr system during MA is also investigated . The mechanism of dual activation reactive milling is discussed .

  19. 不互溶混合工质R-113和水在水平管内冷凝及强化传热研究

    Heat Transfer of Condensation Augmentation of Immiscible R-113 and Water in a Horizontal Tube

  20. 碳酸二甲酯(DMC)具有含氧量高、沸点高、与柴油互溶性好等特点,适合作为柴油机的燃料添加剂。

    Dimethyl carbonate ( DMC ) is one of the best additives for diesel engines due to its features such as highly oxygen content , suitable boiling point and intersolubility with diesel .

  21. 完全互溶双液体系气&液平衡t-x关系式的线性拟合方法

    The Linearity Fitting Method for the t-x Formula under the Gas-Liquid Equilibrium of Compatible Liquid-Liquid System

  22. 应用动态热力学分析仪测定了动态硫化EPDM/PP共混物的动态力学行为、Tg峰的变化,表明PP的非晶部分与EPDM具有部分互溶性,同时讨论了共混物动态模量的特点。

    Dynamic mechanical behaviors of dynamically vulcanized EPDM / PP blends were measured by dynamic thermal mechanical analyser . The changes of T g peaks in various compositions shows that uncrystal part of PP and EPDM is partial miscible .

  23. 二元不互溶Cu-Ta体系非晶相的形成

    Formation of amorphous phase in binary immiscible Cu-Ta system

  24. 动态机械热分析(DMTA)显示热塑性乙酰化淀粉包含富甘油和富淀粉两相,乙酰化淀粉和甘油为部分互溶。

    Dynamic mechanical thermal analysis ( DMTA ) indicated that acetylated starch and glycerol were partially miscible with separated acetylated-starch-rich phase and glycerol-rich phase .

  25. 用改进的Rose釜测定了101.33kPa下醋酸异丙酯-醋酸、醋酸异丙酯-醋酸-水(互溶区内)的等压汽液相平衡数据。

    Isobaric vapor-liquid equilibrium ( VLE ) data for isopropyl acetate-acetic acid and isopropyl acetate-acetic acid-water systems were measured at 101.33 kPa by using an improved Rose equilibria cell . The fugacity coefficients of components in the vapor phase were calculated by Hayden-O ' connell method .

  26. 本文以R-113和水为混合工质,在水平光滑管和七种管型的内螺旋翅片管内进行不互溶混合工质蒸汽的冷凝传热研究。

    The heat transfer in forced convective condensation of immiscible R-113 and water in a horizontal smooth tube was studied experimentally .

  27. 本文以适用于部分互溶液体的循环式平衡釜,测定760mmHg柱下的正丁醇-异丁醇-水体系的汽液平衡数据。

    A recirculating still specially designed for partially miscible systems was used for the determination of isobaric vapor-liquid equilibrium data at 760 mm Hg for the n-butanol-isobutanol-water system .

  28. 体外角质形成细胞(HaCaT)的器官样(气&液交界面)培养气泡在不互溶两相流体界面行为的数值模拟

    The Organotypic Culture of Keratinocytes in Vitro Numerical simulation of the gas bubble behavior in the immiscible two-phase fluid interface

  29. 天然绿色制冷剂丙烷(R290)与冷冻油的互溶特性研究已成为替代CFCs和HCFCs的焦点。

    The solubility of propane ( R290 ) , the natural refrigerant , with different kinds of refrigerating oil has become the focus to the substitutes for CFCs and HCFCs .

  30. 不互溶双组分气液两相混合物在TEMA-F型换热器壳侧的传热

    Two - component two - phase gas - liquid heat transfer on shell - side of Tema - f heat exchanger