乳聚丁苯橡胶

10万t/a乳聚丁苯橡胶工艺技术改进及应用

Technical improvement for ESBR with production capacity of 100 kt / a and its application

离子交联乳聚丁苯橡胶的合成与性能

Synthesis and properties of E-SBR with ionic crosslinking bond

研究了锡偶联型溶聚丁苯橡胶（SSBR）生胶及其混炼胶的流变性能，并与乳聚丁苯橡胶（ESBR）作了对比。

The rheological properties of Sn-coupled SSBR raw and compound were studied and compared with ESBR .

选取乳聚丁苯橡胶、溶聚丁苯橡胶（C）和溶聚丁苯橡胶（B）3种典型的丁苯橡胶，研究了它们与天然橡胶复合体系的动态力学性能。

The dynamic mechanical properties of blends of natural rubber respectively with three kinds of styrene butadiene rubbers , two solution polymerized styrene butadiene rubbers : SSBR ( B ), SSBR ( C ) and an emulsion polymerized styrene butadiene rubber : ESSA have been investigated .

试验研究白炭黑补强乳聚丁苯橡胶（ESBR）混炼胶中的网络结构及网络结构对胶料门尼粘度和动态粘弹性的影响。

The network structure of silica-filled ESBR compound and its effect on Mooney viscosity and dynamic visco-elasticity were experimentally investigated .

以活性炭或γ-Al2O3为载体，先采用浸渍工艺制备出一元或二元负载型催化剂，然后以H2O2为氧化剂对乳聚丁苯橡胶生产废水进行催化氧化法处理。

Monobasic or binary supported catalyst were prepare by dipping process with activated charcoal or γ - Al2O3 as carriers . Then the waster-water produced in process of emulsion polymerized styrene-butadiene rubber were treated with H2O2 as oxidant .

提高乳聚丁苯橡胶SBR1502的聚合转化率

Increasing monomer conversion of emulsion polymerized SBR 1502

研究了国产锡偶联溶聚丁苯橡胶（SSBR）在加工过程中相对分子质量、相对分子质量分布及微观结构的变化，并与乳聚丁苯橡胶（ESBR）进行了比较。

The effects of modification on the molecular weight ( Mw ) and the molecular weight distribution ( MWD ), as well as the microstructure of tin coupled SSBR and ESBR were investigated .

介绍了溶聚丁苯橡胶（SSBR）和乳聚丁苯橡胶（ESBR）在轮胎工业中的发展现状及其性能对比，分析认为，SSBR在发达国家大部分只用于高性能轮胎。

The development condition of solution-polymerized styrene-butadiene rubber ( SSBR ) and emulsion-polymerized styrene-butadiene rubber (( ESBR )) in tire industry were introduced , the performances of domestic SSBR , ESBR were compared with those of abroad .

国外乳聚丁苯橡胶品种及生产技术

Brief Introduction of Foreign Emulsion Type SBRs Species and production Technologies

提高转化率对乳聚丁苯橡胶性能的影响

Effect of increasing conversion on performance of emulsion polymerized styrene butadiene rubber

提高乳聚丁苯橡胶转化率的影响因素

Influence factors of increasing conversion of emulsion styrene butadiene rubber

乳聚丁苯橡胶装置浓硫酸系统腐蚀分析

Corrosion Factors and Protective Measures of Sulfuric Acid System of E-SBR Unit

影响乳聚丁苯橡胶门尼粘度的因素

Factors of affecting Mooney viscosity in e & SBR

低滚动阻力轮胎用乳聚丁苯橡胶

Emulsion Type SBR for Low Rolling Resistance Tyres

国外乳聚丁苯橡胶生产技术的发展趋势

Development trends of E-SBR production technology abroad

低温乳聚丁苯橡胶实时优化系统构造及模型研究

Real Time Optimization System Rebuilding and Model Study of Low-Temperature Styrene and Butadiene Emulsion Polymerization

乳聚丁苯橡胶的分子量分布和凝胶

MWD and gel in SBR

形成了短反应时间、高转化率乳聚丁苯橡胶合成新技术。

It is formed a new technology for SBR emulsion polymerization with short reaction time and high monomer conversion rate .

本文的目的是建立起低温乳聚丁苯橡胶聚合单元的稳态模拟平台，并在此基础上对生产装置进行优化计算。

The aim of this paper is to build the steady state simulation platform of the low temperature styrene / butadiene emulsion polymerization unit .

本论文建立了过程工业的实时优化系统，并将其应用于低温乳聚丁苯橡胶装置。

Real time optimization system of process industry is built in this paper , and is applied to low-temperature styrene and butadiene emulsion polymerization .

试验结果表明，用溶聚丁苯橡胶替代乳聚丁苯橡胶和用白炭黑部分替代炭黑可以有效降低胎面胶的滚动阻力；

The test results showed that the rolling resistance of tire tread could be significantly decreased by using S SBR instead of E SBR , and silica partly instead of carbon black ;