sabot

Every morning she went to a printing office , No. 3 Rue du Sabot , where she was a folder and stitcher .

每天早晨，她到木鞋街三号，一个印刷厂里去，她在那里做装订的女工。

The Characteristic Analysis and Design of the Sabot in Rocket Passive Control System

适配器在火箭被动控制系统中的特性分析与设计

ExPerimental Study of the Effect of Sabot Discard uPon Firing Density

弹托脱落对射击密集度影响的试验研究

Research and analysis of adhesive property between sabot and rocket

弹托与火箭的粘连特性研究分析

Effects of material of band on stresses in sabot during launch

发射初期弹带材料对弹带及弹托中应力的影响

Equally important to the ballistic range tests is the design of model and sabot .

模型及弹托设计是开展弹道靶试验研究的基础。

Application of Similitude Method in the Design of Sabot Armor Piercing Projectile Power Target

相似模拟法在脱壳穿甲弹威力靶设计中的应用

Effect of Sabot Leading Edge Structures on Sabot Discarding Performance

弹托前端结构对脱壳性能的影响

Intermediate Ballistic Research of High Speed Armour - Piercing Sabot Discard Projectile

高速脱壳穿甲弹的中间弹道研究

Optimum seeking parameter of drag type 's APFSDS during sabot discard

阻力型APFSDS脱壳过程参数优化设计

Combined calculation of deformation and stress for the body and the sabot of an APFSDS

联合计算穿甲弹弹体与弹托的应力及变形

Affecting Factor Studies about Firing Consistancy of Discarding Sabot Cartridge and Penetration Properties

对脱壳枪弹射击密集度及侵彻特性影响因素的分析

So the meshing clearance technique is a feasible method for the sabot design with the materials of low density and low intensity .

因此间隙啮合技术为低密度低强度材料的弹托设计提供了可行的方法。

Study on sabot discard movement having machanical action between sabot petal and projectile

弹托与弹丸有相互机械作用时的脱壳运动研究

A finite element method model of three dimension vibration analysis for a fin stabilited sabot discarded penetrator is established .

根据尾翼稳定脱壳穿甲弹的几何形状特点，建立了尾翼稳定脱壳穿甲弹三维振动分析有限元计算模型。

The unified dynamics model was established and collision problem between the sabot and the long rod and the sabots was analyzed .

本文针对卡瓣膛外运动非对称性建立了统一的动力学模型，并分析了卡瓣与弹芯和卡瓣之间的碰撞问题。

Discernment and Process of High-speed Sabot Discard Projectile 3D-image

高速脱壳穿甲弹三维图象的识别与处理

Antioxidation of polyphenol from rapeseed A Study about the Asymmetry in the Sabot Discard Process of APFSDS

菜籽多酚的抗氧化作用APFSDS脱壳非对称性研究

In England , the sabot took the form of the clog , a fabric mounted on a wooden platform .

在英格兰，脱壳采取的形式的堵塞，织物固定在一个木制的平台。

Picks the right weapon to use against the enemy . don 't waste sabot rounds on infantry targets , for example .

使用正确的武器攻击敌军，例如不要在步兵身上浪费穿甲弹。

The grid generation and simulation methods on Armour Piercing Fin Stabilized Discarding Sabot ( APFSDS ) are introduced in this paper .

介绍APFSDS及弹托干扰流场数值模拟中的网格生成方法及其应用。

He dodged cleverly when she threw her sabot at him .

她用木底鞋砸向他时，他机敏地闪开了。

This paper discussed a new meshing scheme of armor-piercing core and sabot of long rod AP , which is adopting the structure of variational tooth clearance .

探讨了杆式穿甲弹的一种新型弹芯与弹托的啮合方案，即采用变齿隙结构方案。

German Marcel Nguyen scored 15.800 to earn a silver , with Hamilton Sabot 's 15.566 winning France a bronze .

德国的马塞尔以15.800分屈居亚军，而萨博特则以15.566分为法国队获得一枚铜牌。

While apply the technique of meshing clearance to the back push type sabot and front push type sabot , we have provided a transient dynamic analysis of this method using ANSYS .

在后推式弹托与前推式弹托上应用了啮合间隙技术，用ANSYS对其进行了瞬态动力学分析。

The paper introduces the new application of plastics and its composites in ordnance , including using them as materials for armor , gun barrel , rotating band , obturator and sabot .

本文概要地介绍了塑料及其复合材料在兵器上的新应用，包括用作装甲材料、炮管材料、弹带和闭气环以及弹托材料。

Basced on the test data , the flight characteristics of the missile model 's discarding sabot is analyzed by the principle and methods of statistics for two kind of missiles with symmetric axis .

针对2种轴对称导弹的靶道试验模型的基本特点，以试验数据为基础，采用统计学原理和方法分析了导弹模型的卡瓣飞行规律。

The dispersion of APFSDS was affected by the collision phenomenon that was found between sabot and long rod and between sabot and sabot in the post-effect period .

尾翼稳定脱壳穿甲弹在后效期脱壳阶段卡瓣与弹芯和卡瓣之间存在碰撞现象，影响脱壳穿甲弹的射击密集度。

While applying the technique of meshing clearance to the aluminum alloy sabot , results show that , compared with the traditional meshing scheme of sabot , the stress of the dangerous tooth surface minishes largely .

通过在铝合金弹托上的应用，结果表明，通过调整间隙，可以使危险齿根面应力大幅度降低并使各齿根面应力非常接近。

In order to reduce the difference of stress level of sabot dedendum surface remarkably and the stress of dangerous dedendum surface greatly , interval meshing technology was applied to the composite sabot of high power armor piercing projectiles .

为有效地降低复合材料弹托发射过程中齿根面应力水平的差异，将啮合间隙技术应用于大威力穿甲弹的复合材料弹托上，给出了间隙啮合技术应用的一般步骤和方法。