mfr

Discussion on the Process for Producing PP with High MFR

论聚丙烯高熔融指数（MFR）产品的生产工艺

Mfr 's control in the production of PBT engineering plastics

PBT工程塑料生产中MFR的控制

Preparation of Polypropylene with High MFR β Crystalline Form

高熔体流动速率β晶型聚丙烯的研制

Modeling of Bulk Propylene Polymerization in Loop Reactor and MFR Prediction

本体法环管式丙烯聚合过程建模和MFR预报

The relation of hydrogen modulation and MFR of batch liquid bulk polypropylene

间歇式液相本体法PP的MFR与氢调的关系

The MFR decreasing with increasing of molecular weight ;

一般，随着SDS相对分子质量增大，熔体流动速率减小；

Melt flow rate ( MFR ) determination of polypropylene ( PP ) and study on its relationship parameters

聚丙烯熔体流动速率的测定及相关参数的研究

According to the high molecular theory , the molecular weight and molecular weight distribution can be showed by MFR .

借助高分子理论，指出以MFR值表征分子量及分布的可行性；

The influence of MFR of PP and mixing technology on the properties of the special material is discussed .

探讨了PP的MFR，以及挤出共混工艺对专用料性能的影响。

The effects of stabilized agent , MFR and melt temperature on degrading behavior were discussed .

对助剂量、熔体温度等工艺条件对降解行为的影响进行了讨论。

The join of fire retardant increase the melt flow rate ( MFR ), make forming more convenient .

阻燃剂的加入提高了熔体流动速率（MFR），使成型加工比较方便。

Evaluation of the uncertainty of measurement of thermoplastics MFR

热塑性塑料熔体质量流动速率测量不确定度的评定

The size of the connecting flange on drum will be provided by pump MFR .

连接法兰上鼓的大小，将提供泵的MFR。

Development of a molecular detection assay for the physiological race MFR of Puccinia triticina

小麦叶锈菌生理小种MFR的分子鉴定研究

For pursuing lower ERR , Multimodal Face Recognition ( MFR ) based on Visual Image and Infrared Image was studied .

为了追求更低的识别错误率，本文研究了基于可见光图像和红外热图像相结合的多模式人脸识别技术。

Soft Measurement of Polypropylene MFR

聚丙烯熔融指数软测量

The melt flow rate ( MFR ) impacting to crystallinity and properties of polypropylene ( PP ) was studied .

研究了聚丙烯（PP）熔体流动速率（MFR）对结晶度及性能影响。

The influences of reaction temperature and the raw materials during the production on MFR and lamination of coating grade polypropylene were analyzed .

本文分析了在生产过程中，反应温度和原料对高熔体聚丙烯产品指数、剥离强度的影响。

It was that found it was proper that the flow ability was characterized by MFR and the deformation ability was characterized by dynamic viscosity .

发现对色母粒这类特殊体系，其流动能力和变形能力之间存在很大的区别；

Nonhalogenated . 7.0 MFR , for thicker sections without sinks .

非卤化。7.0熔体流动，为较厚的路段没有汇。

The result of MFR showed that the compounded fire - retardant with 40 phr could meet the needs of processing craftwork .

熔体流动速率（MFR）的测定表明当复合阻燃剂的添加量为40份时，仍能满足加工工艺的要求。

22.9 % and 36 % improvement in maximal urinary flow rate ( MFR ) and average urinary flow rate ( AFR ), respectively .

最大尿流率（MFR）和平均尿流率（AFR）分别提高22.9%、36%。

Donations of $ 10 can be made by texting " MFR " to 85944 .

发送MFR到85944就可以捐款10美元。

When the mass fraction of nano-meter CaCO_3 was 4 % , the MFR was the maximum .

当nano-CaCO3的质量分数为4%时，MFR出现最大值。

The results of rheological behavior testing and melt flow rate ( MFR ) show that PP 's rheological performance is improved effectively by graft-modification .

流变性能和熔体流动速率（MFR）测定表明，接枝反应有效地改善了PP流变性能。

The melt flow rate ( MFR ) of PP separated from the resulting blends decreased sharply with the addition of GTL .

从挤出物中分离出聚丙烯组分测试熔体流动速率表明，加入亚油酸三甘酯后，其熔体流动速率有很大下降。

The results showed that in the same MFR , CR-PP has higher impact strength and HM-PP has higher elongation .

研究结果表明：相同熔体流动速率的CR-PP与氢调法PP比较，CR-PP的冲击强度高，氢调法PP的断裂伸长率高。

The model can count the important index of production , such as slurry concentration in the reactor , solid contents of products , catalyst residual and MFR .

本模型可以准确地计算CSTR反应器的浆液浓度、产物固含率、催化剂残留率、熔融指数等重要的生产指标。

Influences of the Elastomer Content in E-TMB on the Mechanical Properties and MFR of HDPE / E-TMB Blends

母料中弹性体含量对HDPE/E-TMB共混物力学性能及熔体流动速率的影响

In this thesis , this method is applied to monitor the melt flow rate ( MFR ) of polypropylene . The simulation results demonstrate the effectiveness of this method .

该递推方法用于对聚丙烯熔融指数的监控，仿真结果表明的该方法的有效性。