diametral

  • adj.直径的
diametraldiametral

adj

1
related to or along a diameter
the diametral plane
Synonym: diametric diametrical

数据来源:WordNet

  1. This paper introduces a rarely seen method of describing with diametral distance .

    本文介绍了一种鲜为人知的用直径距离描绘椭圆的方法。

  2. Entire range diametral extensometer and study of material mechanical properties

    全程径向引伸仪及材料力学性能研究

  3. The main principles of choosing a suitable diametral clearance are presented in the paper .

    最后文中还给出了轴承径向游隙选用的一般原则。

  4. Improvement of the Behaviour of Rolling Bearing by Adjustment of Diametral Clearance

    调整径向游隙提高滚动轴承性能的研究

  5. Circular Disk Subjected To Diametral Compression Is Solved Using Experimental Method of The Electrical Analogy

    用电模拟实验法求解对径受压圆盘

  6. The solution method can be applied to corrugated shells of arbitrary diametral sections .

    提出的解决方法适应于任意轴向截面的波纹壳体。

  7. Axial and diametral γ - ray scanning for spent nuclear fuel rods

    核反应堆辐照元件的轴向和径向γ射线扫描

  8. Narrow Gap Submerged Arc Welding for Major Diametral Shell Made of BHW-35

    大直径BHW-35壳体的窄间隙埋弧焊工艺

  9. Question to the inequality of the fitting diametral clearance of ball bearing

    对滚动轴承装配径向游隙不等式的探讨

  10. Potential profile on the diametral line of uniformly charged petal-like surface

    瓣形均匀带电面在其直径处的电势分布

  11. Methods : The surface hardness , compress strength , diametral tensile strength of composites were measured .

    方法:测定材料的硬度、压缩强度、径向拉伸强度。

  12. Relationship between Axial Internal Clearance and Diametral Internal Clearance of Double Row Angular Contact Ball Bearing

    双列角接触球轴承轴向径向游隙的关系

  13. Core tests with diametral point loads

    岩芯径向点荷试验的研究

  14. Fixed Point with Orbital Diametral Function

    闭轨道直径函数的不动点

  15. A Study of Cylindrical Specimens under Diametral Point-load Test

    圆柱状试样径向点荷载试验的研究

  16. The analysis using the Jones calculus and the experimental results for a circular ring in diametral compression are presented .

    文中用琼斯运算作了分析,并且给出径向受压圆环的实验结果。

  17. Using 8031 mono-computer has achieved automatic measure of bearing diametral clearance checker .

    采用8031单片机实现了轴承径向游隙测定仪的自动检测。

  18. The conjugate ellipsograph is designed according to the characteristics of the main & diametral circle .

    共轭椭圆规是根据主径圆的性质设计的。

  19. It is shown that the fatigue life and the stiffness coefficients vary rapidly with the diametral clearance .

    通过分析可见,径向游隙对轴承的疲劳寿命和支承刚度有显著的影响。

  20. Automatic Measure of Bearing Diametral Clearance Checker

    轴承径向游隙测定仪的自动检测

  21. The mixed mode fracture of center cracked Brazilian disk specimen subjected to diametral compression is analysed by weight function method .

    用权函数方法对中心裂纹巴西试样的对径加载作了-复合型断裂分析。

  22. Diametral point load test is a very promising , simple and accurate method for obtaining compressive and tensile strength data of rock core .

    用岩芯进行径向点荷试验,是简单而较精确地获得岩石抗拉、抗压强度的极有前途的方法。

  23. This paper recommends a new type of entire range diametral extensometer which can automatically record entire range P - △ d diagram .

    推荐一种新型的全程径向引伸仪,它能够自动记录全程P-△d曲线。

  24. On Describing Ellipse with Diametral Distance

    用直径距离的拉线法描绘椭圆

  25. These analyses will help operators detect early CT diametral growth before severe damage occurs , and eliminate or reduce operational factors that contribute to growth .

    这些分析将帮助用户在连续油管发生严重损坏之前,提前诊断连续油管的直径增长,并排除或减少引起直径增长的因素。

  26. The potential profile on the diametral line on uniformly charged petal-like plane is deduced by means of potential formula of point charges .

    从点电荷的电势计算公式出发推导出了瓣形均匀带电面在其直径处的电势分布。

  27. At the same rating speed rate , the relaxation time of the sample taken at axial direction was shorter than the sample taken at diametral direction .

    在同一加载速率下,轴向试样比径向试样松弛时间短。

  28. Conclusions : The diametral tensile strength and hardness of the secondarily treated composite resins were higher than those of the light cured composite resins .

    结论:与单纯光固化复合树脂相比,经过二期处理的光固化复合树脂,其径向抗张强度和硬度不同程度的提高。

  29. With an axial tension plate , a pure bending beam and a diametral loaded disk as models , the determination of each material fringe method was performed .

    最后,以轴向拉伸板,纯弯曲梁和对径受压圆盘为试件,测定了它们的材料条纹值。

  30. Then , a logic computational diagram is constructed for calculating diametral growth by assuming fatigue cyclic softening , namely yield strength reduction as tubing fatigues .

    再通过合理的假设,建立用于计算直径增长的计算机逻辑框图。