首页 / 词典 / good

al2o3

  • 【医】【=Aluminium oxide】氧化铝
al2o3al2o3
  1. Al2O3 / Cu composites have the potential use in wide field .

    Al2O3/Cu复合材料具有广阔的应用前景。

  2. Preparation of Pure α - Al2O3 Fine Powder by Sol-Gel Technique

    溶胶-凝胶法制备α-Al2O3超细粉的研究

  3. Influence of γ - Al2O3 content and baking temperature on special surface area is analyzed .

    分析了-γAl2O3的负载量及其焙烧温度对堇青石比表面积的影响。

  4. Characterization of pore development at al2o3 / feal interface during high temperature oxidation

    高温氧化时Al2O3/FeAl界面孔洞形成过程的分析

  5. Study on the microstructure of carbon fiber / pyrolytic carbon + al2o3 Composites

    炭纤维/热解炭+Al2O3复合材料的微观结构研究

  6. Effects of Al2o3 buffer layer on the properties of ZnO films were investigated .

    研究了Al2O3过渡层对ZnO薄膜结构形貌和发光特性的影响。

  7. Speed up the industrialization process of high-purity Al2O3 ceramic .

    由此可见,该方法的不断发展可加快高纯度Al2O3陶瓷的产业化进程。

  8. However , settling tank process can not be used to separate high Al2O3 concentration slurry .

    然而目前工业采用的沉降槽方案无法分离高浓度的溶出浆液。

  9. The Photocatalytic Property of Anodized Al2O3 Film on Al Surface

    铝片表面阳极氧化铝膜的光催化作用

  10. Effect of Zircon Additives upon Properties of La β - Al2O3 Solid Electrolyte

    掺杂ZrO2对Laβ-Al2O3固体电解质的性能影响

  11. The preliminarily formed Al2O3 film can protect the coatings from further oxidation .

    涂层表面优先形成具有保护性的Al2O3膜,阻止了涂层的进一步氧化。

  12. The distribution of Ag and Cu change slightly compared with Al2O3 / Ni joint .

    相比Al2O3与Ni的接头,Ag、Cu分布状况变化不大。

  13. Polystyrene was reinforced with nano-sized inorganic Al2O3 particles using selective laser sintering technology .

    基于选区激光烧结(SLS)技术,进行了无机纳米Al2O3粒子改性聚苯乙烯(PS)的试验研究。

  14. High temperature notch flexure strength and its probability distribution of Al2O3 / tic ceramics

    Al2O3/TiC复合陶瓷高温弯曲强度与弯曲切口强度研究

  15. In this dissertation , Pd / γ - Al2O3 catalyst and different methods of preparation are studies .

    本论文主要是以蒽醌法生产双氧水的Pd/γ-Al2O3催化剂为基础,探索不同的制备方法对催化剂的性能进行改进。

  16. Thermal shock resistance of Al2O3 / TiC gradient ceramic was simulated by FEM .

    利用有限元法研究了Al2O3/TiC梯度功能陶瓷刀具材料的抗热震性能。

  17. ( Ce-TZP ) - Al2O3 ceramic hot extrusion die was studied .

    研制了(Ce-TZP)-Al2O3陶瓷热挤压模具并进行了工业应用试验。

  18. This been made of 95 % Al2O3 is formed by the process of the Hot Pressing Die .

    该弹性梁采用95%Al2O3瓷热压铸成型加工。

  19. Nanocomposites of Al2O3 / SnO2 were synthesized by sol-gel method .

    利用Sol-gel法制备了Al2O3/SnO2纳米粉体,颗粒大小为20nm。

  20. In the present study chitosan-coating Al2O3 was used as supports for enzyme immobilization .

    Al2O3作核心的脱乙酰几丁质颗粒可用作酶固定化的载体。

  21. In this paper , Al2O3 / ZrO2 composite ceramics were prepared by explosive synthesis .

    本论文研究了通过爆炸合成制备al2O3/ZrO2共晶复合陶瓷。

  22. Flame spraying technique was employed to spay Al2O3 ceramic coating on metallic surface .

    采用火焰喷涂技术对基体金属表面喷涂Al2O3陶瓷。

  23. Preparation of Mo-Ni-P Impregnating Solution and Its Interaction with γ - Al2O3 Support

    Mo-Ni-P浸渍液的配制及其与γ-Al2O3载体的相互作用

  24. Apparent erosion rate increases with the Al2O3 content decreases in the slags and the temperature rises .

    表观侵蚀速率随渣中Al2O3含量的减少和温度的升高而增大;

  25. The material has well oxidation resistance mostly because of the forming of a - Al2O3 oxide scale , a ?

    Al2O3氧化膜的形成是材料具有良好抗高温氧化性能的主要原因。

  26. The effects of the solid lubricants on mechanical properties and microstructure of Al2O3 / TiC were studied .

    研究了固体润滑剂CaF2和BN对Al2O3/TiC陶瓷材料的力学性能和显微结构的影响。

  27. The ceramic composite armors consist of Al2O3 backed plates with varying density .

    陶瓷复合装甲由Al2O3陶瓷层和不同密度的均质材料组成。

  28. The nano-Al2O3 powders were prepared from the coarse Al2O3 powders by high energy ball milling method .

    以粗颗粒Al2O3粉为试样,采用高能球磨法制备了纳米Al2O3粉。

  29. With increasing addition of Al2O3 , chromium bounded in spinel phase was replaced by aluminum .

    随着Al2O3添加量的增加,尖晶石中的铬逐渐被铝取代。

  30. And make a summary and outlook on the preparation and properties of the Ni-P / Al2O3 composite coating .

    并对Ni-P/Al2O3复合镀层的制备及性能研究作出总结及展望。