粉体材料

通过该装置可以达到试验目的，收集到合格的Al2O3纳米粉体材料。

By the equipment the purpose of the experiment can be achieved and eligible Al_2O_3 nanometer powder material can be collected .

得到如下结论：（1）首次以钒渣浸出液为原料，经除杂净化、水解沉淀和高温煅烧后制得VO2粉体材料。

The major results are listed below : ( 1 ) first time with the vanadium-bearing slag immerses a liquid for raw material , through seperated , decontaminated , hydrolytic settled , calcinated , get VO_2 powder material .

化学沉淀法制备电极用纳米β-Ni（OH）2粉体材料

Fabrication of Nano-sized Nickel Hydroxide as Electrode Materials by Chemical Deposition Method

利用常压气体放电非平衡等离子体实现了纳米粉体材料（TiO2）的制备。

Nanoscale TiO2 powder were prepared by atmospheric pressure non-equilibrium plasma .

超声辐照下化学沉积法制备Cu/Al2O3复合粉体材料

Preparation of Cu / Al2O3 Powder by Chemical Deposition Under Ultrasonic Irradiation

纳米Al2O3粉体材料激光烧结成型基础试验研究

Fundamental Experimental Study on Nano - Al_2O_3 Bulk Materials Produced by Selective Laser Sintering Technology

高频等离子体制备超细ZrO2、ZnO粉体材料

Preparation of Ultra Fine ZrO_2 and ZnO Powder by High-Frequency Plasma

Al2O3-SiO2纳米复合粉体材料的超临界制备及其性能

Preparation of Al_2O_3 - SiO_2 nanometer composite powder by supercritical technology

大气中金属阴极保护用β-Al2O3粉体材料的制备与性质

Preparation and Characteristic of β - Al_2O_3 Powdered Material as Electrolytic Coating for Cathode Protection in Atmosphere

溶胶-凝胶-喷雾干燥法制备超细Al2O3-SiO2二元粉体材料

Study on Al_2O_3-SiO_2 binary powder materials prepared by sol-gel and spray drying methods

本论文中，我们采用电化学方法制各TiO2&Cu2O纳米复合粉体材料。

In the thesis , nano-size TiO2-Cu2O particle composites were prepared by a novel electrochemical method .

掺杂纳米NiO粉体材料的气敏性能研究

Study on the gas sensitivity materials of doped nano-NiO powder

建立了有机溶剂（甲苯）液滴与超临界反溶剂（超临界CO2）之间的传质模型，用于模拟超临界反溶剂制备微纳米粉体材料的传质过程。

A mathematical model of mass transfer between droplet of organic solvent ( toluene ) and antisolvent ( CO_2 ) was presented .

从锌焙砂湿化学法制备高纯、球状纳米ZnO粉体材料的研究

Studies on the Preparation of High Purity , Spherical and Nanometer Zinc Oxide Powder Materials From Zinc Sand Calcined by Hydro-Chemical method

基于激光熔覆技术，以纳米Al2O3粉体材料为研究对象，研究了纳米陶瓷块体材料制备的技术。

Fabrication of Nano-Al 2O 3 bulk materials by laser cladding technology with Nano-Al 2O 3 powder was achieved .

以蛋壳为原料，磷酸钙为反应剂，采用煅烧合成工艺，可简单快速地制备羟基磷灰石（HA）粉体材料。

The hydroxyapatite ( HA ) powders were simply and rapidly prepared from the eggshells and calcium phosphate by the sintering synthesis process .

而VO2粉体材料，则具有更广阔的应用领域和前景。

But VO2 powder has greater application areas and prospects .

无机粉体材料改性CPVC高压电力电缆护套管的研究

CPVC protecting pipes for high-voltage power cables modified by inorganic powder materials

本文主要从HAP粉体材料及陶瓷材料的合成方面对HAP生物材料的研究进行综述。

This article summarizes the investigation of HAP biomaterial from the synthesizing of HAP powder and ceramic materials .

纳米SiO2作为一种新型无机功能粉体材料，由于其优异的性能而引起了人们的高度重视。

Nano-SiO_2 has attracted much attention in resent years as a novel type of inorganic materials because of its excellent property .

采用紫外-可见光光谱法分析了纳米TiO2等粉体材料的紫外吸收性能；

The absorbing capability for ultraviolet radiation of nano-TiO 2 is analyzed by UV-VIS spectrum . The FTIR spectrum of PP / TiO 2 nano composite is studied .

探测器的热电极为K型热电偶丝，隔离材料是NTC热敏粉体材料。

A pair of elements of the detector is K type thermocouple conductors , and the insulated material is a high NTC thermal sensitive powdered ceramic material .

SOLGEL法具有纯度高、颗粒细等优点，其主要不足为凝胶干燥时收缩性大，粉体材料的烧结性不好；

The Sol-gel process is characterized by higher purity and smaller size products , but its disadvantages are as follows : great shrinkage during Sol-gel drying and poor sintering property of powdered materials .

用电化学合成方法制备了TiO2-Al2O3的复合粉体材料，借助化学热力学数据库软件系统对体系进行了热力学分析。

The TiO_2-Al_2O_3 composite powder were obtained by electrochemical syntheses method .

采用Ti（SO4）2和尿素为原料，利用均相沉淀-发泡工艺制备出了纳米氧化钛粉体材料，并用DTA-TG、XRD、IR和FS等方法对样品进行了表征。

Nano-sized titanium oxide powders were prepared from Ti ( SO_4 ) _2 and urea by homogeneous precipitation-frothing method DTA-TG , XRD , IR and FS were used in characterizing the products .

CIS系粉体材料的研发可为吸收层薄膜的制备提供多种简洁的思路，有望大幅度改进薄膜制备工艺、降低生产成本。

The research of CIS-based powders can cast new insights on the preparation of CIS-based thin films , which are hopeful for improving the technics and reducing the cost of absorption layer preparation substantially .

介绍了高纯超细钛酸铅电子陶瓷粉体材料中铅/钛摩尔比的快速测定方法，样品中的铅、钛利用EDTA滴定法快速测定。

The determination method of Pb / Ti mole ratio in high-pure and superfine lead titanate powder was studied . Pb and Ti in lead titanate sample are determined use EDTA titration method respective .

燃烧-发泡法制备不球磨SrAl2O4∶Eu~（2+），Dy~（3+）长余辉粉体材料

Preparation of non-grinding SrAl_2O_4 ∶ Eu ~ ( 2 + ), Dy ~ ( 3 + ) Long afterglow powdery material by combustion-frothing method

电弧喷涂是一种重要的热喷涂技术，应用这种技术改变压缩气体的成分进行铝喷涂时，可以获得Al2O3纳米粉体材料。

The arc spraying is a kind of important heat spraying technology . The experiment shows that the Al_2O_3 nanometer powder can be obtained when using it for Al spraying by changing the composition of compressed air .

旋转填充床（RPB）是一种常见的超重力设备，并且已经成功应用于多种纳米粉体材料的超重力法制备。

Rotating packed bed ( RPB ) is a familiar high-gravity apparatus , and it has already been used in the preparation of nanoparticles .