简化设计

而且本系统采用了MVC的架构设计，简化设计和实现逻辑同时具有高度的可扩展性。

Finally , this system also uses MVC architecture design to provide simple design , implement and highly expansibility .

悬挂式欹器的静力学分析及简化设计

Static analysis and simple design of Qi Qi

PWM芯片分析及其振荡器电路的简化设计

Analysis of a PWM chip and the simply design of its oscillator circuit

SDH异步复用映射模块简化设计与仿真

Design and Simulation of Asynchronous Mapping Multiplexing in SDH

MOS无源驱动电路的简化设计方法

Simplified Design Method for Power MOSFET Passive Driving Circuit

为简化设计，液面计逻辑时间电路用LOGO逻辑继电器代替。

In order to simplify the design , use the LOGO logic relay to replace the logic time circuit .

HRR脉间变频外场RCS测试设备的简化设计

Simplified Design of High Range Resolution Pulse to Pulse Frequency Shifting Outdoor RCS Measurement Device

MDP提供和简化设计流程。

MDP improves and simplifies the design process .

基于pushover分析方法，提出粘滞阻尼器消能减震结构的一个简化设计方法。

A simplified design method based on pushover analysis was developed for energy dissipation systems using viscous dampers .

本文提出一种结构简单、易于工程实现的信号综合自适应MRAS的超稳定性简化设计方法。

In this paper , a hyperstability design method for the signal-synthesis adaptation MRAS is proposed .

提出可编程序控制器PLC程序设计的一种新方法&模拟状态图法，该方法能简化设计，提高设计速度和质量。

This paper introduces a new method of PLC programing-simulating state pattern , which can be applied to any type of PLC . This method can simplify design , improve quality and speed of design .

叉角为90°的RSSR机构的简化设计

A Simplified Design for the RSSR Mechanism with a Twist Angle of 90

通过Solidworks的二次开发环境，利用VB编程，生成三维实体图和二维工程图，简化设计过程，提高了设计效率。

Through further development of solidworks and by using VB programming to form three-dimensional graph together with two-dimensional engineering graph , designing procedure is simplified , which improved the design efficiency .

基于对界面剥离破坏机理的充分认识，根据数值分析结果和试验结果，建立了CFRP混凝土组合梁剥离承载力的计算模型，并进一步提出了实用简化设计公式。

Based on the results of numerical analysis and experimental , the author set up the CFRP concrete beams spin-off bearing capacity calculation model . And propose a practical formula to simplify the design .

高层钢结构TMDs风振舒适度控制最优参数与简化设计

Optimum parameters and simplified design for wind-induced vibration comfort control on tall steel structure with TMDs system

单用户OS环境具有实时多任务特征系统（RTMT）的简化设计与实现

Simple Designing and Accomplishing of Real Time and Multi Task ( RTMT ) System in Single User Operation System ( OS ) Environment

提出用BP网络实现高斯光束衍射变换的方法，为聚焦光学系统的设计提供新途径，简化设计过程，达到了实用化的要求。

This paper puts forward a method to realize the diffraction transformation of the focused gaussian beam with Bp network . The method provides a new approach for the design of focused system , simplifies designing process and meets the requirement of practical use .

详细介绍一种三轴简化设计制造四轴回转类零件的一种方法，避免了四轴回转类零件复杂造型设计，使设计过程更加简单、快捷，也使NC编程更为方便。

The methed of design manufacturing for 4-axis rotary parts simplified to 3-axis to is detailed . So , the complex design for 4-axis rotary is avoided , and it makes design course more simple , shorten , and makes NC programming simplification .

利用ORDBMS的长处可以简化设计，以及极大地提高结果系统的性能。

Taking advantage of the strength of ORDBMSs can simplify the design and greatly improve the performance of the resulting system .

模糊规则修正器能充分利用对被控对象的分析成果；GA寻优算法能进一步简化设计，提高性能。

In this control system , the fundamental fuzzy controller is simple and applicable , the fuzzy rule reviser can use sufficiently the analysis result of the object controlled , GA can simplify the design and improve the performance of this controller .

分析和对比了两种常用的HRR脉间变频外场RCS测试设备的设计方法，针对脉间变频格式RCS测试一维成像的特点提出了一种简化设计的思路。

Two usual designs of High-Range-Resolution pulse to pulse frequency shifting RCS outdoor measurement device are analyzed and compared . A simplified design is presented point to the peculiarity of the pulse to pulse frequency shifting RCS measurement One-Dimension imaging .

分析了平衡流形展开形式的增益调度控制器的简化设计问题、简化形式的存在条件，以及进一步化简为LPV形式的条件。

Issues related to design of gain scheduling controller in EME form were discussed , including simplified controller of this type and its existence , and requirement of further simplification to LPV form .

最后，讨论了长细比取值较大的高柔桥墩和不等高MDOF全桥结构的多阶模态效应，引入多自由度振型分解反应谱理论提出了全桥结构基于性能的简化设计方法。

Finally , multi-phase modes effect of flexible bridge pier with high slenderness and MDOF full-bridge structure was discussed , and decomposition theory of multi-degree of freedom response spectrum was introduced to develop a performance-based seismic design method for full-bridge structure .

本文阐述一种连续时间广义预报控制器（CGPC）的简化设计方法，这种简化设计将原来CGPC控制器的15项设计参数减少至两个，同时不失去原CGPC控制器的优良控制性能；

In this paper , a simplified design of Continuous-time Generalised Predictive Control ( CGPC ) is proposed . With the design , 15 items of design parameters of original CGPC can be decreased to 2 items , without losing the basic good control performance .

钢筋混凝土双向板简化设计方法&改进条带法

Simplified Design Method of Reinforced Concrete Two-Way Slab Modified Strip Method

阻滑桩加固土坡稳定性分析与桩基的简化设计

Stability analysis of slopes with stabilizing piles and their simplified design

多输出组合逻辑电路的简化设计

The Simplified Design of Combinatorial Logical Circuit with Many Output Variables

夹板式单层玻璃板承载性能的简化设计方法

Simplified Design Method for Capability of Glass Panels with Overlapped Connectors

铂电阻测温仪表的简化设计与非线性补偿

The Simplified Design of Pt Resistance Temperature Instrument and Non-linear Compensation

光电跟踪最优控制的简化设计

A Simplified Design of Optimal Control for An Electro-Optical Tracking System