硅锰

guī měng
  • Silicon manganese;silicomanganese
硅锰硅锰
硅锰[guī měng]
  1. 硅锰渣中(CaO+MgO)/Al2O3比值的控制与渣型的选择

    Control of Cao + mgo / al_2o_3 ratio in silicomanganese slag and choice of slag constitution

  2. X射线荧光光谱法测定硅锰合金用总量X荧光法勘查铜矿

    XRF spectrometry of silicomanganese ferroalloy using pressed disc sampling of the sample powder The total content X-ray fluorescence method for prospecting copper deposits

  3. 熔融法在X荧光分析硅锰合金中的应用

    Application of the Melting Method to Si - Mn Alloy 's XRF

  4. 复合碳硅锰压片X射线荧光光谱测定

    X-ray fluorescence spectrometric determination of compound carbon - silicon - manganese tablet

  5. X射线荧光光谱法对硅锰合金中多元素的同时分析

    Simultaneous Analysis of Multi-element in Si-Mn Alloys with X-rays fluorimetry

  6. 高碳硅锰TRIP钢低应变速率下的拉伸性能

    Tensile properties of high carbon Si-Mn TRIP steel at low strain rate

  7. 微量元素Ti在硅锰低合金钢中的作用

    Effect of Trace Titanium on Si Mn Low Alloy Steel

  8. Cr含量对铬硅锰合金耐磨铸铁性能的影响

    Effect of Cr Content on Properties of Cr-Si-Mn Alloy Wear Resistance Cast Iron

  9. 热处理工艺对低碳硅锰TRIP钢力学性能的影响

    The Effects of Heat Treatment Technology on Mechanical Properties of the Low Carbon Si-Mn TRIP Steel

  10. 低碳硅锰系TRIP钢热处理工艺的研究

    Study on the Heat - Treat Condition of the Low Plain Carbon Si - Mn TRIP Steel

  11. ICP-AES法测定硅锰合金中的硅

    Determination of the Silicon in Silicon-manganese Alloy by ICP-AES Method

  12. ICP-AES法测定硅铁、硅锰中铅和锌含量

    ICP-AES Determination of Ferrosilicon Si-Mn Content of Lead and Zinc

  13. 用低Mn/Al2O3值锰矿以高铝渣生产硅锰合金的探讨

    Discussion on producing Mn Si alloy with manganese ore of low Mn / al_2o_3 , value and high-aluminium slag

  14. ICP-AES法测定低合金钢中硅锰铬

    Determination of Silicon , Manganese and Chromium in Low Alloy Steel by ICP-AES

  15. ICP-AES法测定低碳铬铁中的硅锰磷

    Determination of si , p and Mn in low-carbon ferrochromium with ICP-AES method

  16. 铌硅锰非均匀形核表面淀积掺杂PTC陶瓷

    Barium titanate based PTC ceramics doped by Nb-Si-Mn heterogeneous nucleation surface deposition method

  17. ICP-AES法测定生铁中硅锰磷的研究

    Study on the determination of silicon manganese and phosphorous in pig iron by ICP AES

  18. 硅锰渣微粉末C60混凝土研究及应用

    Research and use of C60 concrete with silicon-manganese fume

  19. 理论计算表明,将锰矿、石灰熔化成渣,倒入摇包或其它装置,再兑入Si≥28%的高硅锰硅合金,可以生产出C≤01%的锰铁。

    Theoretical calculation shows that the FeMn with 〔 C 〕≤ 0.1 % can be produced by mixing the molten slag of Mn ore and limestone with FeMn with 〔 Si 〕≥ 28 % .

  20. 硅锰铁合金在EBT电炉上的应用

    Application of Ferro Silicon-Manganese Alloy in EBT Electric Arc Furnace

  21. 结果表明:硅锰钢中加入量w为015%的稀土合金后,其铸造性能得到了改善,铸态组织细化,为发展稀土铸钢奠定了基础。

    The result shows that the casting properties of SMS ( silicon manganese steel ) are improved and the casting structure is refined greatly after adding 0.15 % of No. 1 RE alloy to SMS .

  22. 在硅锰钛脱氧钢中主要有两类夹杂物:一类是锰钛氧化物夹杂,另一类是MnS夹杂物带有TiN析出相。

    There are two main kinds of inclusions formed in Si-Mn-Ti deoxidized steels in this research . One kind inclusion is manganese titanium oxide ( Mn-Ti oxide ) .

  23. 在长期冶炼硅锰合金实践的基础上,探讨了SiO2还原过程的热力学行为;

    On the basis of the long practice of smelting the alloy of silicon and manganese the thermodynamics behavior in the process of the reduction of silicon dioxide is probed into .

  24. 研究了硅含量分别为15wt%和10wt%的冷轧低碳硅锰TRIP钢两相区退火温度对残留奥氏体量和力学性能的影响。

    This paper studies the effects of silicon content and intercritical annealing conditions on retained austenite and mechanical properties of the two low-carbon cold-rolled TRIP steels , which containing silicon content 1.5 % wt and 1.0 % wt respectively .

  25. 此工艺可使低硅硅锰合金的降碳率达63%,合金成分均匀、含Mn量高,且工艺操作简便、技术可行、经济有利。

    By this new process , the carbon decreasing rate in low-Si SiMn can reach 63 % , components in alloy are well-distributed with high Mn content and also the operation of process ie simple with workable technology and beneficial economy .

  26. 阐述了在9MVA封闭电炉上冶炼高硅锰硅合金的实践。

    The practice of smelting high silicon ferromanganese silicon in9MVA closed electric furnace is expounded .

  27. 讨论了硅锰合金氧化脱磷的热力学条件,用硅钼棒炉,CaOSiO2MnoCaF2渣系对硅锰合金进行了氧化脱磷实验,取得了较高的脱磷率和脱硫率。

    [ synopsis ] The thermodynamic conditions are discussed for dephosphorization of silicon manganese by selective oxidization and high rates of dephosphorization and desulphurization have been achieved in the experiments in dephosphorizing silicon manganese by oxidization method using CaOSiO_2 MnO CaF_2slag system as oxidizer in a Si Mo bar furnace .

  28. 低磷低碳高硅锰硅合金的生产实践

    Production practice of low phosphorus and low carbon high SILICON SILICOMANGANESE

  29. 稀土对硅锰耐磨铸钢铸造性能的影响

    The Influence of RE Alloy on the Silicon-manganese Abrasion-resistant Steel Casting

  30. 高氯酸氧化三价锰滴定法测定硅锰铝合金中的锰

    Determination of Manganese Content in Silicon-manganese-aluminum Alloy by Perchloric-acid-oxidation-trivalent-manganese Titrimetric Method