硅树脂

以PVB为造孔剂采用硅树脂制备泡沫陶瓷

Fabrication of SiOC Ceramic Foam with Silicon Resin and Polyvinyl Butyral

硅树脂材料热光特性的测试与分析

The Test and Analysis for Thermo-Optic Effect of Silicon Resin

采用苯基甲基硅树脂对聚碳酸酯（PC）进行阻燃改性。

The flame retardant modification of polycarbonate ( PC ) with methyl-phenyl silicone resin is studied .

~（60）Coγ射线辐照对甲基苯基硅树脂结构和性能的影响

Effect of ~ ( 60 ) Co γ Ray Irradiation on Structure and Properties of Silicone Resins

研究了PET短纤维和硅灰石晶须混杂增强硅树脂复合材料的拉伸性能。

The tensile properties of short PET fiber / wollastonite / silicone resin hybrid composites have been studied .

MQ硅树脂及其压敏胶粘带的研究

Study on MQ silicone resin and the pressure sensitive adhesive tape

分别用PET短纤维和硅灰石（无机针状晶须）增强甲基乙烯基硅树脂，研究了纤维长度、含量与复合材料力学性能的关系，并考察了增强纤维对硅树脂热稳定性的影响。

The mechanical properties and thermal stability of short PET fiber and wollastonite reinforced silicone resin were studied respectively .

结果表明，含乙烯基的MQ硅树脂对加成型室温硫化硅橡胶的增强作用明显，硅橡胶的透明性很好。

The silicone rubbers reinforced by MQ silicone resins had high transparency .

甲基乙烯基MQ硅树脂的制备工艺研究

Research of the Preparation Process of Vinyl-substituted MQ Silicone Resin

MQ硅树脂增强加成型室温硫化硅橡胶

Reinforcement of addition-curing type room temperature vulcanizing silicone rubber by MQ silicone resin

MQ硅树脂/纳米TiO2复合改性环氧树脂的结构与性能

Structure and performance of composite epoxy resin modified by MQ silicone / nano-TiO_2

MQ硅树脂对加成型室温硫化硅橡胶性能的影响

Effects of MQ Silicone Resin on the Properties of Addition-cured Room Temperature Vulcanization Silicone Rubber

对用MQ硅树脂增强缩合型双组分室温硫化硅橡胶进行了研究。

MQ silicone resins was used to reinforce two component RTV silicone rubbers of condensation-curing type .

质子辐照对MQ硅树脂增强加成型硅橡胶力学性能的影响

Effect of proton radiation on mechanical properties of addition silicone rubber reinforced with MQ silicone resin

精选优质的进口玻纤布，采用独特，精细的工艺技术涂层PTFE树脂，再单面涂上硅树脂粘胶剂而制得。

Teflon coated fiberglass cloth impregnated with PTFE ( polytetrafluoroethylene ) dispersion and coated with high-temperature , pressure-sensitive silicone adhesive .

结果表明：增强效果主要决定于MQ硅树脂的结构，包括M／Q（摩尔比）和硅羟基的质量分数。

The reinforcement effectiveness mainly depended upon the structure of MQ silicone resin including M / Q ratio and the content of hydroxyl groups .

纳米TiO2对真空紫外辐照下MQ硅树脂增强硅橡胶质损及热性能的影响

Effect of Nano-Titanium Dioxide on Mass Loss and Thermal Performance of Silicone Rubber Reinforced by MQ Silicone Resin Under VUV Irradiation

MQ硅树脂的制备及其对硅橡胶的补强作用采用水玻璃法制备了MQ硅树脂；

MQ-type silicone resin was prepared by water-glass method , and the function of different solvents in MQ-type silicone rubber was researched .

M/Q决定了硅树脂和硅橡胶的相容性，随着M/Q的增加，MQ硅树脂和硅橡胶的相容性变好；

The compatibility of MQ resin with the silicone rubber relys on the M / Qratio and improved with tne increment of it .

硅树脂模具以混合树脂和金属粉末填充，用作制造RT模具的半成品部件。

This silicone mould is used to manufacture a green part of the RT-mould by filling in a compound of resin and steel powder .

对合成的硅树脂采用FT-IR进行了结构表征，结果表明合成出含端羟基的甲基苯基硅树脂。

The structure of silicone resin was characterized with FT-IR methods . It was shown that the silicone resin was polymethylphenylsiloxane termined by hydroxyl groups .

适当加入惰性填料SiC（5%，质量分数）或活性填料（纳米Al、Si粉）可以大幅度提高硅树脂对Cf/SiC复合材料的连接性能。

An appropriate ( amount ) of inert filler SiC ( 5 % , mass fraction ) or active filler nano-Al / Si powder is good for the joining of C_f / SiC composites .

研究了水解温度、搅拌速度以及溶剂等因素对水解反应的影响，并用IR、29SiNMR谱图表征了硅树脂的结构，研究了其耐热性及固化性能。

The structure was characterized by IR and ~ 29Si-NMR spectra . The thermal properties of the silicone resins and curing system were studied .

特氟龙薄膜胶带永盛精选优质的PTFE薄膜作为胶带基材，经过特殊表面处理，单面涂上一层硅树脂粘胶而制得特氟龙薄膜胶带或带衬纸卷状自粘胶带。

Youngsun selects high quality Pure Teflon film , with a special surface treatment and then coating with high quality silicone adhesive to produce the PTFE film adhesive tape .

结果发现，以20mL乙醇作混配溶剂、六甲基二硅氧烷为萃取剂制备的MQ硅树脂性能较好；

The result showed that MQ silicone resin , which with 20 mL alcohol as solvent , hexamethyldisiloxane as extractant , had good properties .

未改性纳米Co3O4粒子的加入降低硅树脂的耐热性；

The untreated Co_3O_4 particles deteriorate the thermal properties of the silicone resin .

另外，本文还对比了甲基苯基硅树脂与硼酚醛树脂对PBMA的性能影响。

In addition , this article compared the methyl-phenyl silicone with the boron phenolic resin .

基于铜片的硅树脂膜附着力为1级，冲击强度等于或大于500N·cm。

The adhesion strength of silicone resin membrane to metal copper sheet was the first class , and impact resistance strength was ≥ 500 N · cm .

采用空间综合辐照模拟设备研究了100keV和150keV能量的质子辐照对MQ硅树脂增强的加成型硅橡胶的损伤及其对硅橡胶热性能的影响。

The effect of proton radiation with the energy of 100 keV and 150 keV on thermal properties of additional silicone rubber reinforced with MQ resin by space combined radiation simulator was studied in this paper .

分别采用丙烯酸类聚合物与硅树脂材料实现了长周期光纤光栅（LPFG）的大范围波长调谐与温度补偿。

Both acrylate-based polymer and silicone resin were proposed as recoating materials for broadband wavelength tuning and temperature compensation of LPFG .