直流无刷电机

  • 网络brushless dc motor;bldc;bldc motor;bldcm
直流无刷电机直流无刷电机
  1. 本文介绍了一种通过DSP软件示波器结合无位置传感器直流无刷电机控制系统来实时地观测电机运行时各种变量的波形的方法。

    This paper introduces a way of observing wave form of variables at the motor running by software-oscilloscope in combination with sensorless brushless DC motor control system .

  2. 直流无刷电机电流检测技术的研究

    Research on Current Measurement Technique of Brushless DC Motor

  3. 基于DSP的无位置传感器直流无刷电机控制系统的实时观测方法

    Realtime Observing Sensorless Brushless DC Motor Control System Based on DSP

  4. 三相直流无刷电机DSP控制系统的设计

    The Design of DSP Control System Applied to Three Phase Brushless DC Motor

  5. 基于DSP的直流无刷电机控制器的硬件设计

    DSP-based Hardware Design of Brushless DC Motor Controller

  6. 应用磁敏Z元件直流无刷电机电子换相电路的研究

    Research on Reversing Electric Circuit of Brushless DC Motor Used Magnetic-Sensing Z-Element

  7. PWM控制技术在直流无刷电机调速系统中的应用

    Application of PWM Control Technology in Speed Control System of DC Brushless Motor

  8. 本文设计了48V/800W直流无刷电机的DSP调速系统的硬件和软件。

    The hardware and the software of DSP control system applied to the three phase brushless DC motor of 48V / 800W are designed .

  9. 开发了以直流无刷电机驱动的AMT车辆电控操纵系统。

    This paper discusses the brushless-DC-motor-driven electronic control system of an AMT vehicle .

  10. 介绍了直流无刷电机的工作原理和基于位置传感器的控制方法,提出了基于数字信号处理器(DSP)的控制系统。

    The principle of brushless DC motor the control method with position sensor is introduced , and the control system based on DSP is presented .

  11. 系统采用CPU驱动直流无刷电机转动,编码器输出的正余弦信号指示电机的位置。

    The system with CPU drives the DC brushless motor , and the encoder indicates the motor position outputting the sine and cosine signal .

  12. 直流无刷电机LQG控制系统研究

    Research of LQG Control of Brushless Direct Current Motor

  13. 根据直流无刷电机的特性,计论了数字PID控制系统的设计原理和实现方法,并给出了实验曲线。

    The design principle and realization method of digital PID control system are discussed in terms of the characteristics of DC brushless electromotor , and the experimental curve is also presented .

  14. 介绍PWM技术的工作原理,以及应用于直流无刷电机调速系统的实例分析。

    The operation principle of pulse width modulation ( PWM ) is presented , and the example of its application in DC brushless motor speed control system is analyzed .

  15. 通过采用FPGA的在线可编程技术完成对直流无刷电机的驱动控制,使整个驱动系统结构灵活紧凑,易于调试,极大地简化了驱动电路的结构,实现驱动系统的微型化。

    Using online programming technology of FPGA to complete driving control of brushless DC motor . So that the whole structure of driving system is flexible , compact and easy to debug .

  16. 针对电机空间矢量控制和直流无刷电机120电角度换相控制算法的电路实现,采用了控制状态机与PWM发生电路相结合的方法。

    The method of finite state machine together with PWM circuit is given to realize the algorithms of Voltage Space Vector control and 120 electrical angle changing phase control of DC brushless motor .

  17. 文章首先探讨了直流无刷电机的二二控制的一般方法,然后在此基础上提出了新型的二一PWM控制法。

    This paper discussed the general method with two-two control method to control brushless DC motor , then put forward a new type of control method with two-one PWM control method on this basis .

  18. 在变频产品开发中,通过变频模块产生的PWM信号,在控制直流无刷电机中,会产生严重的电磁噪声,将影响电磁兼容测试中的指标。

    In inverter product system , electromagnetic noise produced by PWM amplifier signal from the inverter module in control system of DC motor with non-brush can effect the levels of voltage conducting and power radiation .

  19. 论文研究了深海水下液压机械手驱动系统的压力适应型控制器,主要包括ECU控制单元、直流无刷电机控制器以及比例控制放大器。

    This thesis investigates pressure adaptive controller for deep-sea hydraulic underwater manipulator , including ECU control unit , brushless DC motor controller and the proportional control amplifier .

  20. 用于混合动力汽车ISAD系统的直流无刷电机的设计及优化

    Optimization and Design of Brushless DC Motor in ISAD System for Hybrid Electric Vehicle

  21. 首先对直流无刷电机的基本组成环节、基本工作原理、运行特性和传递函数作了详细的介绍,分析了直流无刷电机的换相过程和PWM信号的分配情况。

    I first talk about the basic component part , the basic running principle , the running characteristic and the transfer function of the BLDG motor . Followed , it analyses the course of changing phase and distributing of PWM signal .

  22. 本文提出了一种基于DSP的直流无刷电机控制器的硬件电路,包括电流环、速度位置环和IPM(智能功率模块)驱动的硬件电路设计。

    In the paper , the hardware circuit design of a DSP-based Brushless DC Motor Controller is given , which includes a current loop , a speed position loop , and IPM ( Intelligent Power model ) driver .

  23. 论述了基于C8051的直流无刷电机控制系统设计,实现了速度、电流的双闭环控制。

    Brushless motor control system design based on C8051 was introduced , speed and current double close loop control was realized .

  24. 描述了DSP56803在直流无刷电机控制中的应用,以及直流无刷电机的控制方法,最后给出实验波形。

    Application of DSP56803 in the control of DC brushless Motor and control method are also described .

  25. 直流无刷电机(BLDCM)因为具有低压特性好,转矩过载能力强,启动转矩大,启动电流小等优点而得到了广泛的应用。

    Brushless DC motor ( BLDCM ) is used widely for the reason that it have many advantages of good low-voltage performance , strong torque overload capacity , great starting torque and low starting current .

  26. 开关电容变换器在直流无刷电机驱动电路中的应用

    Application of Switched Capacitor Converter in DC Brushless Motor Driver Circuit

  27. 一种特殊直流无刷电机的驱动及调速系统

    A drive and speed regulating system for special brushless DC motors

  28. 直流无刷电机神经网络直接转矩控制

    Neural Network Control on Direct Torque Control for Brushless DC Motor

  29. 直流无刷电机在织机送经中的驱动控制

    The Drive and Control of DC Brushless Motor in Loom

  30. 永磁直流无刷电机设计混合型专家系统的研究

    Study on Integrated Expert System for Permanent Magnet Brushless DC Motor Design