电工钢

主要成分及工艺对极低铁损高磁感中等Si含量的无取向电工钢磁性的影响

Influence of main composition and processing on magnetic property of extre-low iron loss high magnetic induction non-oriented electrical steel

CSP流程生产全工艺无取向电工钢

Development of full-processed non-oriented electrical steel in a CSP line

磷对w（Si）0.4%无取向电工钢磁性能的影响

Effects of phosphorus on magnetic properties for w ( Si ) 0.4 % non-oriented electrical steels

CSP工艺开发电工钢的现状及其优势

Current State and Advantages on Developing Electrical Steels in CSP Process

CSP生产无取向电工钢的组织和性能

Microstructure and Magnetic Properties of Non-Oriented Electrical Steels Produced by CSP Technology

Al含量对模拟CSP工艺无取向电工钢磁性能影响的初步分析

Preliminary Analysis on Effect of Al Content on Magnetic Properties of Non-oriented Electrical Steel Prepared by CSP Process Simulated

实验结果表明，采取较低的板坯加热温度可以改善CSP无取向电工钢的磁性能。

The results show that magnetic properties can be improved by lower slab reheating temperature .

应用波长扫描X射线荧光光谱法对中低合金钢、电工钢、高锰钢、不锈钢中锰元素进行测定。

Manganese elements in low alloy steel , electrician steel , high manganese steel and stainless steel were measured with sequential wavelength scanning X-ray fluorescence spectrometry .

四辊/六辊HC中试轧机冷轧电工钢技术

Technology for cold rolling electric steel by 4 high / 6 high HC intermediate experimental mill

CSP生产半工艺无取向电工钢的组织及性能研究

Research on evolution of microstructure and properties of semi-processed non-oriented electrical steel produced by CSP line

PCVD法制6.5%Si电工钢的研究PCVD法制作高硅硅钢片的研究

Research on 6.5 % Silicon Steel Sheet Produced by PCVD Technique

PCVD硅涂层对电工钢磁性的影响

Effect of PCVD Si-Deposited Layer on Electromagnetic Properties of Silicon Steel

CSP与传统工艺生产无取向电工钢的组织和织构对磁性能影响的对比分析

Comparative Analysis of Effect of Microstructure and Texture on Magnetic Properties of Non-Oriented Electrical Steel Produced by CSP and Traditional Processes

无取向电工钢M21环保绝缘涂料的研制

Development of M21 Environmentally-friendly Insulation Coating on Non-oriented Electrical Steel

分析了薄板坯连铸连轧工艺生产电工钢的现状，与传统的厚板流程相比，分析了CSP工艺生产电工钢的优势。

This article analyzes the present situation of electrical steel manufacture by thin-slab casting process and describes the advantages of CSP process for manufacturing electrical steel compared with the traditional slab casting process .

并与传统的厚板流程进行了对比分析，表明采用CSP工艺生产的电工钢具有铸态与热轧态晶粒组织细小、温度加热均匀、板形易于控制、成材率高等优势。

In comparison with traditional process , CSP process has advantages of finer grain size , at cast and rolled state , homogeneous heating , controlling shape with ease and high production yield .

介绍了马钢无取向电工钢用M11含铬绝缘涂层的开发过程及工艺流程。

The development , performance and application of M11 chromate-containing insulation coating on non-oriented electrical steels of Masteel was presented .

Al-TRIP钢、无磁钢、电工钢等高铝钢中Al含量一般超过0.5%，在浇铸过程中活泼元素Al易与保护渣中的SiO2发生反应。

The high aluminium steels , such as alumina-containing TRIP steels , non-magnetic steel , electrical steel , and so on , generally contain more than 0.5 % Al , whose chemical property is so lively that can react easily with SiO2 in mould fluxes during casting .

概述了NKK钢铁公司近年来一系列高附加值产品的最新研发动态，涉及汽车板、电工钢等产品。

The status of research and development of high additional value products , such as car sheet and silicon sheet in NKK is introduced .

我们已要求同中国展开磋商，讨论其未能在美国输华的取向电工钢的反倾销、反补贴关税问题上遵守WTO义务的情况，美国贸易代表迈克弗罗曼（MikeFroman）周一表示。

We have requested consultations with China on its failure to bring antidumping and countervailing duties on US exports of GOES ( grain oriented flat-rolled electrical steel ) into compliance with its WTO obligations , said Mike Froman , US trade representative , on Monday .

阐述变压器电工钢、HIB钢对变压器空载损耗与噪声水平的影响，并对2005年和2010年的取向硅钢消耗量进行了预测。

Effects of adopting transformer electrical steel and HIB steel on no-load loss and noise level of transformer are analyzed . In addition , a forecast to the annual consumption of oriented silicon sheet for 2005 and 2010 is given .

武钢冷轧电工钢牌号探讨

Discussion on the Brands of Cold Rolled Electrical Steels in WISCO

国内外电工钢市场调研

Survey and Study on internal and external markets of silicon sheet

在我国申请的无取向电工钢专利技术的分析

Analysis on Patented Technology of Non-Oriented Electrical Steel Applied in China

无取向电工钢冷轧及退火织构的演变

Evolution of Cold Rolling and Annealing Textures in Nonoriented Electrical Steel

新型电工钢片磁性能无损检测传感器及应用

New Nondestructive Test Sensor for Magnetic Sheet Properties and Its Application

高牌号无取向电工钢中硫化物、氮化物析出的热力学分析

Thermodynamics of sulfide and nitride precipitation in high-grade non-oriented electrical steel

2000年以来国外无取向电工钢的研究进展

Technical Progress in Non-oriented Electrical Steels in the World Since 2000

新日铁公司在中国申请电工钢专利技术综述

Summarization of NSC applied patent to the electrotechnical steel in China

电工钢连续退火机组的特点及其比较

Features and comparison of continuous annealing lines for silicon steel strip