热固性树脂

目前热固性树脂在绝缘粘合剂和浸渍漆方面的应用存在着韧性低、耐电晕时间短、击穿场强低等问题，这就限制了其在高压电动机及变频调速系统绝缘中的广泛应用。

The uses of thermosetting resin have problems of low toughness , short corona resistant time , lower breakdown strength filed on adhesive and impregnating varnish aspect . This restricted its use on high voltage electromotor and frequency conversion system .

LCM是闭模成型工艺，其原理是将预制成型体放入模腔内，用液态热固性树脂浸渍，树脂固化后脱模，然后进行修整得到产品。

LCM is closed casting process that the principle is the pre-molding into mold cavity with liquid thermosetting resin impregnated and the resin cured after released would be carried repairing products .

用改性热固性树脂作粘结剂，分别用A和B两种鳞片石墨作原料，采用相同的工艺条件制得和两种炭刷坯体。

Carbon brush ⅰ and ⅱ using foliate graphite A and B respectively were prepared under the same technological conditions and with modified thermosetting resin as binder .

反应诱导相分离法（Chemicallyinducedphaseseparation）制备多孔聚合物材料，是在固化反应开始之前，溶剂或热塑性塑料与热固性树脂混合均匀后，体系处于均相状态。

Chemically induced phase separation is a method for preparing porous polymer . Before curing reaction , solvent or thermoplastic mixes with thermosets and arrives to a homogenous state .

LCM工艺用热固性树脂体系化学流变模型的研究进展

Chemorheology Models of Thermosetting Resins and State of the Art for LCM Process

综述氰酸酯树脂（CE）的种类及热固性树脂、热塑性树脂、橡胶弹性体、含不饱和双键化合物等对CE树脂的改性。

The type of cyanate ester resin ( CE ) and its modification by thermosetting , thermoplastics , rubber elastomer and unsaturated compound with double bond are reviewed .

介绍反应注射成型（RIM）工艺在热固性树脂PU，EP和热塑性树脂PA&6，双环戊二烯等领域的新发展。

This thesis introduces the new development of the reaction injection molding technology in the field of thermosetting plastics PU and EP thermoplastics PA-6 and dicyclopentadiene .

双马来酰亚胺树脂（BMI）是一类高性能热固性树脂，具有良好的加工性能、耐热性能、介电性能和机械性能。

Bismaleimides , one of the most promising classes of high performance thermosetting resins , are known for their excellent processability and balance of thermal , electrical and mechanical properties .

水基冷贴纸塑复合胶（WP）的研制高性能覆铜板用热固性树脂

The Study on Water based Adhesive ( WP ) Used to Laminate Paper and Polymer Film THERMOSETTING RESIN FOR HIGH PERFORMANCE COPPER CLAD LAMINATE

PPS开始跻身于以前为环氧等热固性树脂独占的电子电气元件封装领域；

USA. PPS began to beat its way to the area of packaging of electric and electronic components which was usually dominated soly by thermosetting resins such as epoxy resin .

环氧树脂（EP）是聚合物基复合材料中最常用的热固性树脂之一，具有优异的力学性能、粘结性能、耐腐蚀性能、电气绝缘性能和耐热性等。

Epoxy resin is one of the most widely used thermosetting materials with attractive properties , such as high strength and stiffness , excellent adhesive property , anti-corrosion , insulating as well as thermal properties .

确定反应为一级反应，求算其反应活化能为13.9kcal/mole，这与用DSC和TBA法求算的活化能相近似，这为研究热固性树脂的固化反应提供一个新颖而简便的方法。

The activation energy of the reaction is 13 . 9 Kcal / mole consistent with that determined by and TBA methods . Thus for study of curing reaction of thermosetting resin , XPS technique is a simple method .

环氧树脂是一种应用广泛的热固性树脂，是ACF胶粘剂重要的基体树脂，环氧树脂型ACF具有粘结力强、固化收缩率小、耐化学介质稳定性好等优点。

Epoxy resin is a kind of thermosetting resin , which is an important base resin for ACF adhesive . Epoxy-based ACF has many outstanding performances , such as great adhesive stress , chemical resistance and low shrinkage .

氰酸酯（CE）树脂是含二个以上氰酸酯官能团（&OCN）的新型高性能热固性树脂，自20世纪70年代末出现以来，其独特的结构引起了人们的普遍关注。

Cyanate ester ( CE ) resin is a kind of novel high-performance thermosetting resins , which contains two or more isocyanate functional groups ( & OCN ) . Since its appearence in the late 70s of 20th century , its unique structure has attracted wide attention of people .

其次，通过功能性POSS与热固性树脂的反应，合成出均相杂化树脂，然后再对杂化树脂进行固化，得到无机组分与高分子基体通过化学键连接、均匀分散的有机无机杂化高分子材料。

Secondly , functional octa ( aminosilsesquioxane ) reacted with thermosetting epoxy resin to synthesize uniform hybrid resin , which was cured afterward to obtain organic inorganic polymeric hybrid materials , in which inorganic components bonded covalently with organic matrix and dispersed uniformly .

不饱和聚酯（UP）是一种重要的热固性树脂，用纤维增强的不饱和聚酯具有极广泛的应用。

Unsaturated polyester ( UP ) is an important thermosetting resin .

日本印制板用热固性树脂的进展

Development of thermosetting resins for printed circuit boards in Japan

热固性树脂固化的非模型反应动力学研究

Study on the non-model method of thermosetting resin curing kinetics

居里点裂解-气相色谱-质谱鉴别热固性树脂研究

Curie point pyrolysis gas chromatographic-mass SPECTR-OMETRIC identification of thermosetting polymers

热固性树脂/炭黑复合材料的微波介电性能

The microwave dielectric property of thermoset / carbon Black Composites

先进复合材料用热固性树脂基体的发展

Development of thermosetting resin matrix used for advanced composite materials

在给排水管道工程中推广应用玻璃纤维增强热固性树脂管

Application of Glass-Fiber-Reinfored Thermosetting-Resin Pipe in Water Supply and Sewerage Pipeline Engineering

粘土在热固性树脂/粘土体系中插层及剥离行为

Intercalation and Exfoliation Behavior of Clay in Thermoset Resin / Clay System

改善热固性树脂装饰层压板阻燃性能的研究

Improvement of Fire-resistance for Decorative High Pressure Laminate Based on Thermosetting Resins

GB/T7911.12-1987热固性树脂装饰层压板尺寸稳定性性能的测定

Decorative laminated sheets based on thermosetting resins & Determination of dimensional stability

热固性树脂真空加压浸注工艺条件的研究

Impregnating Conditions of Thermosetting Resin in Vacuum IMPREGNATING PITCH

碳纤维/热固性树脂复合材料层合板的抗冲击性能差。

CF / thermosetting resin composites laminate is of bad anti-impact property property .

热固性树脂韧性的改进途径及其增韧机理

The Modification Methods and Mechanism of Toughening Thermosetting Resins

颗粒第二相改性热固性树脂的增韧机理谱

A family of mechanical spectrums of toughening thermosetting resins with second phase particles

热固性树脂的微波固化

MICROWAVE CURING OF THERMOSETTING RESIN Ren Chong-yuan , Luo Yi-lin , Zhang Li-feng