热塑性

利用，X-ray，DSC，SEM等对氰乙基化木的微观结构和热塑性进行了研究和表征。

FTIR , X-ray , DSC and SEM were used to characterize the chemical structure and thermoplasticity of cyanoethylated Wood .

指出PTT集良好的加工性、机械性、热塑性、高弹性、尺寸稳定性和染色等诸多特性于一体，具有广阔的市场前景。

Pointed out that PTT has good workability , mechanical properties , thermoplasticity extensibility , high elasticity size stability and dye-ability , and would take good application prospect .

热塑性聚氨酯弹性体主要由含OH的低聚物多元醇、小分子扩链剂和异氰酸酯等原料聚合而成。

Thermoplastic polyurethane elastomers are prepared with polyol ester containing OH , isocyanate and a chain extender .

聚乙烯（PE）、聚丙烯（PP）是非常有用的热塑性材料。

Polyethylene ( PP ) and Polypropylene ( PP ) are widely used thermoplastic materials .

采用不同相对分子质量的聚丁烯热塑性弹性体，对聚丙烯（PP）进行共混改性，并研究了共混物的力学性能和热性能。

Polypropylene was modified by thermoplastic elastomer poly-1-butylene ( PBt-TPE ) of various molecular mass .

剑麻纤维和聚乙烯改性SBS热塑性弹性体的性能研究

Properties of SBS Thermoplastic Elastomer Modified by Sisal Fiber and Polyethylene

本文研究了以PVC树脂为基质，通过橡塑共混改性PVC的方法制备热塑性弹性体。

In this paper , PVC-TPE was studied by means of modifying PVC and rubber-plastic blending .

研究动态硫化EPDM／PP热塑性弹性体相态结构及其力学行为。

Morphology and mechanical behavior of dynamically vulcanized EPDM / PP blend were discussed .

用热塑性弹性体改性HDPE的发泡研究

Studies of Foaming of HDPE Modified by Thermoplastic Elastomer

基于PM的SiCp/Al复合材料在热塑性变形时的组织变化研究

Research on the Microstructure Transformation of SiC_p / Al Composite Based on Powder Metallurgy in Hot Plastic Forming

SBS热塑性弹体改性沥青的研究

Modification of Asphalt by Thermoplastic Elastomer SBS

白炭黑补强热塑性聚烯烃（POE）的性能研究

Study on Properties of Thermoplastic Polyolefin ( POE ) reinforced with Silica

结构钢热塑性变形后冷却过程的数值模拟研究综述锻造CAPP系统的研制

Review of numerical simulation for the cooling process of the structural steel hot forging The Study on Forging CAPP

共混方法和设备对聚酯短纤维增强动态硫化EPDM／PP共混型热塑性弹性体性能的影响

Effects of blending methods and equipment on properties of short fiber reinforced epdm / pp blending thermoplastic elastomer

聚碳酸酯（PC）是手机外壳常用材料，它是一种综合性能优异的热塑性工程塑料，具有较高的回收价值。

Polycarbonate ( PC ) is a typical material used widely in mobile phone shell . It is an engineering polymer with excellent comprehensive properties .

热塑性弹性体SBS的工业开发&Ⅰ.SBS的合成与质量

The industrial development of SBS thermoplastic elastomers & ⅰ . synthesis and properties of SBS thermoplastic elastomers

随着热塑性弹性体中EVA用量增大，弹性体的拉伸强度、赵氏硬度和拉伸永久变形增大。

The tensile strength , hardness and permanent deformation of the elastomer increased with the increase of EVA content .

PA用量为35份的EPDM/PA热塑性弹性体具有良好的力学性能、耐溶剂性能和耐热老化性能；

The EPDM / PA thermoplastic elastomer with PA 35 phr had good mechanical properties , resistance to solvent and thermal ageing properties .

短Kevlar纤维增强的热塑性聚氨酯弹性体

Thermoplastic polyurethane elastomers reinforcing with short Kevlar fibre

研究了金属粉末注射成形新型PEG基热塑性粘结剂的注射料性能。

A Novel PEG-Based Binder for Metal injection Molding The properties of MIM feedstock with a novel PEG-based binder were studied in this paper .

制备胶粉/高密度聚乙烯（HDPE）热塑性弹性体（TPE），并研究其性能。

A crumb rubber / HDPE thermoplastic elastomer ( TPE ) was prepared and its properties were investigated .

选用氯丁橡胶（CR）和高聚合度聚氯乙烯（HPVC）为主体材料，用动态硫化法制备了一类性能优异的材料&CR/HPVC共混型热塑性弹性体（TPE）。

The thermoplastic elastomers from CR / HPVC blend with excellent mechanical properties were prepared by dynamically curing .

研究了热塑性聚氨酯（TPU）与丙烯腈-丁二烯-苯乙烯共聚物（ABS）共混对ABS结构和性能的影响。

This paper studied the influence of blending ABS with thermoplastic polyurethane ( TPU ) on the structure and properties of ABS resins .

对通用性热塑性塑料PP进行了挤出试验，分别在存在滑移状态和非滑移状态下测量并观察挤出制品的径向尺寸和截面形状。

Having made extrusive experiment on pp versatility and thermoplastic , measured and observed the radial size and pressure of extrusion products in slipping state and slipping less state .

用GPC测定了苯乙烯类热塑性弹性体（SBS）合成过程中生成的二嵌段SB质量分数，讨论了其对SBS力学性能和加工性能的影响。

The effect of the mass fraction of diblock SB on the mechanical properties and processability of linear SBS and star SBS was discussed .

在微波合成的基础上，研究不同双酚A（BPA）加入量对热塑性酚醛树脂性能的影响，并对树脂的分子结构进行分析。

The effect of different bisphenol A ( BPA ) contents on the properties of novolac resins was studied by microwave synthesis method , and the molecular structures of the resins were analyzed .

着重讨论了合成方法、反应温度、软段和硬段的组成结构、弹性树脂R值及熟化条件等因素对热塑性聚氨酯弹性树脂性能的影响。

The influences of synthetic method , reaction temperature , soft and hard segment composite structure , elastomer R value and curing condition etc. on the property of thermoplastic elastic urethane resin were emphatically discussed .

聚对苯二甲酸丁二醇酯（PBT）是一种重要的热塑性工程塑料，主要缺点是裂纹扩展能较低和裂纹引发能很高，缺口冲击强度特别低。

PBT is an important engineering thermoplastic with low crack propagation energy , high crack initiation energy and low notched impact strength .

聚丙烯（PP）是最具发展前途的热塑性高分子材料之一，但是，由于它是非极性聚合物限制了其使用。

Polypropylene ( PP ) is one of the most promising thermoplastic polymer . However , the use of polypropylene has been restricted because it is a kind of non-polar polymer .

热塑性聚酰亚胺（PI）具有突出的热稳定性、良好的抗冲击、抗辐射和耐溶剂性能，是一类很有发展潜力应用于摩擦学领域的基体材料。

Thermoplastic polyimide ( PI ) with outstanding thermal stability , good impact resistance , solvent resistance and anti-radiation is a potential matrix material applied to the field of tribology .