构形
- configuration
-
[configuration] 一种几何图形,通常由谋和线以及这些点、线得出的面组成
-
构形可约性证明的DNA算法
A DNA Algorithm of Proving Configuration Reducibility
-
基于自构形快速BP网络的并联机器人位置正解方法研究
Forward Displacement Solution of Parallel Robot Based onSelf configuration Quick BP Neural Network
-
solidworks三维造型与构形设计
Three - dimensions Modeling in Solid Works and Designing of Shape
-
(m,n)构形的带宽论马克思主义的出场形态
On bandwidth of the ( m , n ) - configuration
-
新构形法硬齿面插齿刀及其CAD
New configured hardened face gear pinion cutter and its CAD
-
仿真结果证明了自主构形重构算法的有效性和基于Agent的自主构形重构的可行性。
Simulation results show the validity of reconfiguration algorithms and the feasibility of Agent-based autonomy methods .
-
分布式SAR超分辨成像的卫星编队构形优化设计方法
Optimization Design Approach of Formation Flying for Distributed Spaceborne SAR Super-resolution Imaging
-
SAR干涉测高分布式小卫星编队构形优化设计
Formation Optimized Design for the Height Measurement of InSAR Using Distributed Micro-Satellites
-
介绍了棋盘构形中m×n棋盘r染色的同色矩形存在性的问题。
The existence of a concolorous rectangle on m × n chessboard dyed by r-color is introduced .
-
主星带伴随小卫星编队SAR系统干涉测高精度与编队构形设计
Height-Measure Accuracy of INSAR in Spaceborne Parasitic SAR System and Flying Formation Design
-
J2摄动对编队飞行卫星相对轨道构形的影响
J_2 perturbation effect on relative orbital configuration of satellites in formation flying
-
最后根据分布式小卫星SAR的空间编队构形,通过与单颗星载SAR回波信号相比较,分析了分布式小卫星SAR回波信号的特点,为其数据处理提供参考。
Finally , the characteristic of DSS-SAR signal is analyzed in comparison with conventional spaceborne SAR .
-
确定完全随机构形分布不均匀表面定域吸附能分布函数的CA法
Determination of Localized Adsorption Energy Distribution Functions of Heterogeneous Surface With a Fully Random Topo graphical Distribution by Condensation Approximation Method
-
星载InSAR均匀相位构形的空间基线稳定性
Stability of Baselines of Spaceborne InSAR in Even Phase Configurations
-
编队构形设计是分布式干涉SAR系统总体设计的关键问题,它必须紧密结合系统性能评价和编队运动规律进行。
The formation configuration design of the distributed spaceborne interferometric SAR ( DSInSAR ) is the key issue of the system design .
-
论述了在制图教学中结合Solidedge的建模原理和方法,突出形体表达,加强对学生形体构形能力培养的具体方法。
The article discusses the integrated teaching mingled with solid edge and the principle of modeling , and specific methods in training students ' ability of structure shaping .
-
基于测高精度最优值的星载分布式InSAR编队构形设计方法
A Formation Design Approach of the Distributed Spaceborne InSAR Based on Height-measure Optimal Accuracy Value
-
文中给出了利用修改后的设计方法所设计的三种特殊构形,并用卫星工具软件(satellitetoolkit,STK)进行了仿真。
Three special formations are designed under the new method and simulated by the mission analysis software STK ( Satellite Tool Kit ) .
-
提出采用均匀设计与BP神经网络相结合的方法进行基于工件成形构形约束的管材无模轴压胀形工艺设计。
The dieless tube axial force bulging process design based on the part forming configuration constraints by using the uniform design combined with BP neural network is set forth .
-
本文基于卫星编队的构形原理,定义了星载InSAR均匀相位构形。
Based on the principle of satellite formation , the even phase configuration for the spaceborne InSAR was defined .
-
Spinvortex自旋构形是铁磁多层膜里很普遍出现的磁构形,这种涡旋状的自旋构形在平行于磁膜平面的外磁场下会很容易地漂移。
Spin vortex configuration is a very common structure founded in ferromagnetic multilayers . This kind of vortex spin configuration will shift easily by applied an in-plane field .
-
针对InSAR构形下的分布式卫星SAR系统,分析了垂直航向基线对数据相关性和运动目标检测性能的影响。
Aiming at the distributed SAR systems with InSAR formation , the influence of the cross-track baseline on the performance of target detection are analyzed .
-
采用模糊逻辑控制器与LQR相结合的控制策略来解决自主运行卫星编队构形重构问题。
A hybrid control strategy of fuzzy logic control and LQR is adopted for autonomous satellite formation reconfiguration .
-
本文探讨用DNA计算的方法来解决构形的可约性证明,因为DNA计算具有大规模并行计算的能力,能够大大地减少证明所需的时间。
In this paper , we try to solve the proof of configuration reducibility using DNA computing . Because of the massively parallel computing ability of DNA computing , we can shorten the time of the proof greatly .
-
通过仿真分析表明,这种自主分布式规划和整体协同方法能有效处理构形保持规划这一复杂问题。多Agent协商为DSS的自主规划提供了有益的思路。
Simulation indicates that this mechanism of autonomous distributed planning and coordination accomplishes relative formation keeping task well , and multi agent negotiation provides a promising way for DSS autonomous formation planning . 2 .
-
概述了数据构形技术的主要功能,通过简单的示例介绍了如何构建SHAPE命令并生成动态分层记录集,讨论了采用多种方法生成动态分层报表的关键技术。
It is summarized main functions of the Data Shaping , introduced through simple examples how to make the SHAPE command and create dynamic hierarchical recordset , and discussed the key technique to form dynamic hierarchical data report by various methods .
-
他们应用的研究手段和一些主要的研究结果,重点放在DNA的实验力学的物理、化学基础,实验的原理和方法,对目前讨论得较多的DNA的超绕构形也作了介绍。
Emphasis is placed on the physical principles and advanced methods of measuring the mechanical properties of DNA based on the mechanics of continuous media , and some experimental results are given . The DNA supercoiling problems are also discussed .
-
模拟结果表明,用MonteCarlo方法模拟砂土的自然堆积结构是非常有效的,可以为砂土的流动、压实等的数值模拟工作提供初始构形。
The simulation results indicate Monte Carlo method is very valid for simulating sand particles packing under gravity . The simulating results can provide initial configuration for simulating flow and compaction of sand materials .
-
本文主要针对DSS的位置构形调整规划展开深入研究,主要内容与成果如下:1.提出了基于多智能体(multiagent)协商的DSS构形保持自主规划方法。
In this thesis , systematic research on formation adjusting planning was conduct , main contents and accomplishments are as follows : 1 . Autonomous formation keeping planning method based on multi agent negotiation was proposed .
-
应用ALE参考构形及ALE参考粒子速度描写充填过程中的熔体质量运动。
The material movement of the melt polymer in the filling process is described by means of the ALE referential configuration with the referential particle velocity .