旋转编码器

旋转编码器与PC接口设计

The Design of Interface Between Rotary Encoder and PC

基于FPGA的旋转编码器抗抖动四倍频电路设计

The Anti-jitter Fourfold Frequency Multiplication Circuit Design of a Rotary Encoder Based on FPGA

叙述了旋转编码器在有轨缆车PLC控制系统中的应用。

Circumvolve coder application in the rail cable car PLC control system was discussed in this paper .

基于USB技术和旋转编码器的旋转运动检测与控制系统

System of rotating motion test and control based on USB technology and rotating encoder

基于CPLD的旋转编码器接口电路设计及应用

Interface Circuit Design and Application of Rotary Encoder Based on CPLD

利用旋转编码器将电梯的位移转化为脉冲数，PLC对此脉冲进行高速计数。

Utilizing revolving conder for transforming the position of elevator into pulse , pc takes high-speedy count of the pulse .

本系统使用了PLC内部专用的旋转编码器输入型高速计数器，实现了针灸机械手的运动控制。

This system realizes controlling the move of acupuncture manipulator by means of the inner high speed counter with quadrature encoder .

用旋转编码器、接近开关等传感器与CPU实现长度计数智能控制电路。

A novel intelligent control circuit for length counting with rotating codec and approaching switch was introduced in this paper .

介绍一套由PLC、触摸屏和旋转编码器组成的煤量测量装置。

One set for measuring the belt conveyor coal capacity formed by PLC , touching screen and revolving coder is introduced in this paper .

采用PLC、步进电机和旋转编码器组成半闭环控制系统，解决了高速频繁启动停止运动下步进电机的丢步问题。

The system controlled by PLC , in which rotary encoder and stepper motor forming the semi-closed loop control system to overcome the problem of step-out .

着重介绍了使用旋转编码器与PLC相结合来提高定尺长度精度的方法。给出了PLC控制系统的硬件接线图及程序设计。

Meanwhile , in combination of the rotary coder and PLC is emphatically introduced , the hardware wiring diagram and the program design of the system are also given .

然后实现了系统的硬件开发，完成变频器的参数设置及PLC的选型、I/0点数分配以及旋转编码器与PLC的连接。

Then realized the system hardware development , complete inverter parameter and PLC of the selection of the I / 0 points distribution and rotary encoder and PLC connection .

该系列仪器采用LCD显示器，配合数字键盘与旋转编码器，使仪器显示直观，全面，操作更简单方便。

The meter adopts LCD display which makes display direct and complete and operation more easy and convenient with digital keyboard and revolving encoder .

高分辨磁旋转编码器磁鼓表露磁场分析与AMR检测磁头设计

Analysis of Surface Magnetic Field on High-resolution Magnetic Rotary Encoders and Design for AMR Magnetic Heads

将可编程控制器引入电控系统，新系统的启动、停止、安全保护和安全制动由PLC进行控制；速度反馈信号由装在电机轴的旋转编码器采回。

The start and stop of the new system , security protection and safety brake was controlled by PLC ; The speed feedback signal was collected by the rotary encoder installed in the motor shaft .

简介了旋转编码器在Φ100mm自动轧管机组中的应用情况。

Briefly described here is the application of rotary coder to O. D. 100 mm plug pipe mill .

设计制作出性能优良的磁旋转编码器AMR检测磁头，理论分析结果与对磁鼓表露磁场的实际测试结果进行了分析对比。

A good AMR magnetic head for the magnetic rotary encoder was designed . The results of theoretical analysis and practical test were contrasted .

研制了轮式拖拉机瞬态滑转率测量装置。该装置由MCS-51单片机系统和旋转编码器组成。

An apparatus for measuring slip of wheeled tractor is developed , which is composed of a monolithic computer MCS-51 system and slip detecting components ( rotary encoders ) .

其工作原理简单的说就是在开环控制的交直流电机的基础上将速度和位置信号通过旋转编码器、旋转变压器等反馈给驱动器做闭环负反馈的PID调节控制。

In brief , the principle is that velocity and position signal are returned to drivers to adjust feedback negative close loop for PID by rotate encoder or rotate transformer on the basis of AC or DC motor for open loop control .

研制成的磁性旋转编码器的性能为：分辨率为800PPR、输出电压>40mV（V（cc）

A magnetic rotary encoder is developed . The properties of the device are : resolution ≈ 800 ppR , output voltage > 40 mV ( V_ ( cc )≈ 5 V ), sensitivity ≈ 0.5 mV / Oe .

底螺分解机控制系统以PLC为核心，IPC为上位机，检测由接近开关、旋转编码器、压力传感器、磁尺等实现。

PLC is used as control core , and IPC is used as upper PC in control system for base adapter dismantlement machine . Test was realized with proximity switch , rotary encoder , pressure sensor and magnetic scale etc.

为了更加有效的防止重物下滑，在桥式起重机起升机构各加上一套由旋转编码器、PG数模转换和PLC相结合的闭环系统，使主副吊钩拖动更加稳定、可靠。

Prevent the heavy object from gliding for being more effective , rise organization of crane add one rotate encoder , PG count mould change combine PLC with close ring system , make clivers more steady , more reliable .

系统采用带有现场总线Profibus-DP接口的旋转编码器来测量闸门的位置，可靠性得到很大提高，并给出了通信程序。

In this system the position of the gate 's displacement is measured by a rotating coder which provides a Profibus-DP interface , and the reliability is enhanced . The communication program is listed .

磁旋转编码器四倍频电路分析与集成化设计

Quadruplicated Frequency Circuit Analysis of Magnetic Rotary Encoder and IC Design

旋转编码器在汽车转向角试验台中的应用

The Application of Rotary-encoder in the Automobile Turning Angle Test Bed

增量式旋转编码器在复摆法冲量测量中的应用

Application of incremental revolving encoder in impulse measurement with compound pendulum

磁性旋转编码器磁阻磁头研制磁编码器多极磁鼓材料的研究

Fabrication of the Magneto Resistance Readout Head for Magnetic Rotary Encoder

半闭环采取传统的两个旋转编码器控制方式。

The half - closed - loop takes two common rotary encoders .

增量式光电旋转编码器及在角减速度测量中的应用

Incremental Photoelectric Rotary Encoder and Application in the Measuring of Angular Deceleration

基于旋转编码器的长度测量系统设计

Design of the length measurement system based on rotary encoder