摩擦轮

深立井小型摩擦轮提升机电动机的选型

Motor Selection of Small Friction Pulley Hoist for Deep Mining Shaft

应用ANSYS分析软件对不同结构摩擦轮的强度作了详细分析，分析了摩擦轮应力及应变的变形云图。

By applying the ANSYS analytical software , this paper made a detailed analysis on the strength of various structured friction wheel . The deformation cloud diagram of stress and strain of friction wheel was analyzed .

本文针对JKMD型（4.5米4多绳摩擦轮）提升机，对其制动系统进行设计。

In this paper , the braking system for JKMD type ( 4.5 meters over four-rope friction round ) hoist have been designed .

调速电动机行星摩擦轮断裂分析

Fracture Analysis of Planet Frictional Wheel of Speed Regulation Electric Motor

无级变速摩擦轮机构传动比确定

Determination of the Transmission Ratios of Stepless Speed Change Friction Wheel Mechanisms

单绳双摩擦轮提升中的几个问题

On the certain problems in the case of rope double friction wheel hoist

多绳摩擦轮提升机主绳与罐道绳更换的实践

Practice of Replacing Main Rope and Cage Guide Rope for Multirope Friction Winder

摩擦轮提升机恒减速制动装置的应用

Application of Constant Retarding Device in Friction-wheel Mine Hoist

多绳摩擦轮提升机首绳快速更换装置的研究

The automatic renewal of wire - rope device in multi-rope friction drive hoist

关于非金属&钢摩擦轮机构设计传动比之实现

On realization of the designing transmission ratios of the nonmetal steel friction wheel mechanisms

摩擦轮结构对强度影响规律的研究

Research on the influence law of strength affected by the structure of friction wheel

通过手柄上的弹簧调整两摩擦轮之间的间隙，还可以灵活改变介入力大小。

Pushing force is neatly changed by adjusting the distance of two friction wheels .

一种浮动式内摩擦轮减速器

Gearbox of floating - type inner frictional wheel

基于摩擦轮的自动推进系统的设计

Design of Automatic Pushing-system Based on Friction Wheel

论文介绍了摩擦轮的结构特点，详细分析了它的受力状况。

The paper introduces the structure characteristics of the friction wheel , labors the force-loading status of the wheel .

由于外摩擦轮和浮动摩擦轮布置在内摩擦轮内部，因此结构紧凑。

The outer and floating frictional wheels are assembled within inner frictional wheel , so the structure is compact .

通过对比计算结果，得出了影响摩擦轮强度的因素。

The factors that affecting the strength of friction wheel were obtained by means of the result of contrast calculation .

在综合分析摩擦轮驱动方式的基础上，结合前人的研究成果，提出了总体设计方案即摩擦轮驱动柔性铰链的微位移工作平台。

According to friction wheel driving types , gives the micro displacement working platform by the friction wheel driving the flexible hinge .

连续挤压法的特点是：挤压所需的压力是借助一个回转的摩擦轮来实现的。

The distinguishing feature of continuous extrusion process is that the pressure which is needed for extrusion comes from a rotary friction wheel .

设计的浮动式内摩擦轮减速器主要由外摩擦轮、内摩擦轮和浮动摩擦轮等构件组成。

The designed transmission case of floating-type inner frictional wheel is made of outer frictional wheel , inner frictional wheel and floating frictional wheel .

为提升机摩擦轮的设计提供了一些具有参考价值的建议，为现场生产提供了可靠的设计依据。

Thus provided some suggestions with referencing values for the design of friction wheel of hoist and offered reliable designing basis for the on-the-spot production .

提出驱动摩擦轮送丝方法，分析了摩擦驱动力与摩擦轮上开槽角度之间的关系；

The friction driving force and the best angle of the flute on the friction wheel when the friction driving force is in the max are made out .

从计算结果来看，摩擦轮上的弯矩和应力水平，远较单绳提升机卷筒的数值为低。

As shown by the calculated results , the bending moment and the stress levels for the friction wheel are far below those for the drum of a single-rope hoist .

对于大型光电望远镜，多电机摩擦轮驱动方案较单力矩电机直接驱动方案在电机的研制和低速平稳跟踪上有明显的优势，但其关键点和难点在于多电机的同步控制上。

In terms of large telescope , the design of multi-motor friciton driving is obviously more advantageous than that of single torque motor direct driving , however , synchronized control for multi-motor has its sticking point and difficulty .

计算及分析表明，利用该方法设计小弹性模量非金属-钢摩擦轮机构，可使其实际传动比十分逼近设计值。

It has been indicated by calculation and analysis that the actual transmission ratios of the nonmetal with small elastic modulus - steel friction wheel mechanisms can be made to approach quite the design values by means of the twice approaching method recommended in this article .

这种抽油机采用电动机正反转动，驱动同轴连接的摆线针轮减速器，带动摩擦轮正反向转动，使抽油杆上、下运动来抽汲产液。

The new unit uses electric motor rotating both clockwise and anti-clockwise to drive the coaxially connected cycloid needle wheel reducer , and to force the friction wheel rotating clockwise and anti-clockwise too , thereby to make the sucker rod move up and down for oil pumping .

锥轮&摩擦盘轮无级变速机构传动比确定

Determination of the Transmission Ratio for Stepless Gearshift Mechanisms with Two Cone Wheels and a Friction Disk Wheel

摩擦夹送轮有指引与推进的双重功能，可能都位于MC两方的末端。

Friction pinch wheels that serve a dual function of guiding and propulsion , possibly at both ends of the MC .

摩擦对偏心轮推杆行星传动接触应力及疲劳强度的影响

The Impact of Friction on Contact Stress and Fatigue Strength of the Eccentric Wheel Handspike Planetary Transmission

所述小车底部的走动装置包括摩擦梁、导向轮和走轮；

The friction surface of the friction beam is connected with friction wheels of a friction driving unit .