微硬盘

目前阶段基于此平台上实现了MP3的播放，并且采用了微硬盘技术，与目前采用的存储媒体闪存和硬盘相比，具有体积小、容量大、功耗低等特点。

Now we have already achieved the MP3 music playback on this platform , also adopt Micro Drive ( MD ) technique , the practice proves that the platform attain the design requirement completely , has the characters of low cost and high efficiency .

并介绍了微硬盘的基本结构，以及指纹识别模块的基本原理，说明指纹识别微硬盘的一个关键在于两模块间接口的设计。

Later the thesis introduces the structure of the micro drive and the basic principle of the fingerprint identification . It is noted that one of the key designs is the design of the interface between the two modules .

用Solidworks和ANSYS对微硬盘悬臂梁进行建模及模态分析

Modal Analysis and Modeling of Micro Hard Disk Driver Suspension , Using ANSYS and Solidworks

指纹加密模块与微硬盘SOC接口的设计

Design of the Interface between Fingerprint Identification Module and SOC Module of the Encrypted Micro Hard Disk

基于改进免疫算法的微硬盘双级控制模型辨识

Identification on Microdisk Dual-stage Control Model Based on Improved Immune Algorithm

微硬盘的不确定性非线性系统及其跟踪控制

Uncertain nonlinear system of micro hard disk and its tracking control

微硬盘时变线性系统的随机扰动衰减研究

Study on Stochastic Disturbance Attenuation of Time-variant Linear System on Micro Hard Disk

微硬盘驱动器的时变线性模型及其跟踪控制研究

Study on Time-Variant Linear Model of Micro Hard Disk Driver and Its Tracking Control

利用锁相环跟踪马达转速在微硬盘伺服写入中的应用

Applications of PLL for Micro-hard Disk Servo Writing to Follow the Motor Rotate Speed

贵州省微硬盘产业的起步、生存和发展

Probed into the Initiation , Current Situation and Further Development of Guizhou Micro-disk Industrial

微硬盘时变线性系统的降阶观测器及跟踪控制

Reduced Order Observer and Tracking Controller of the Linear Time-variant System of Micro Hard Disk

回答经常是“闪存”，“一个微硬盘”或者其它一些技术。

The reply is usually " flash memory ,"" a little hard drive " or some other technology .

在研究微硬盘读写通道时，模拟伺服信号的信号发生器必不可少。

The device for servo signal generation is necessary for reading and writing the channel of micro hard disks .

随着微硬盘在科技、商业以及军事等特殊领域的广泛应用，信息安全性也越来越重要。

In the special fields such as technology , business , military , etc , information security is a very important aspect .

微硬盘以其容量大、寿命长、传输速度高、高防震性等优点，在各类设备中得到广泛应用。

Micro hard disk drives were widely used in many products and equipments with their advantages such as large capacity , long life , high-speed transferring and shockproof .

随着硬盘驱动器技术的发展，微硬盘被广泛应用于便携式计算机及其他数码产品中。

With the development of The Technology in Hard Disk Drive ( HDD ), The Microdrive has been widely used in the portable computer and other digital products .

本文针对微硬盘装配中压片送料机构设计和过滤片变形行为仿真，从送料机构需求分析、概念设计、结构参数设计、变形仿真四个方面研究了送料系统的开发。

In this thesis clamp feeding mechanism design and a filter deformation simulation in micro hard disk driver assembly are researched , a feeding system is developed based on requirement analysis , concept design , structure parameter design and deformation simulation .

针对微硬盘伺服系统中音圈马达驱动器的不确定时变线性模型，利用李亚普诺夫稳定性理论及线性矩阵不等式，提出一种非线性观测器及其相应的含饱和项的反馈控制器。

For the uncertain time-variant linear model of voice coil motor in micro hard disk servo control system , a nonlinear observer and its corresponding feedback controller with one saturation term are proposed by utilizing Lyapunov stability theory and linear matrix inequality .

首先，对硬盘驱动器的结构和工作原理进行分析，得到了微硬盘磁头弹性臂的工作环境，用Solidworks2005软件建立了微硬盘磁头弹性臂的简化三维实体模型。

Firstly , the author analyzed the structure and operation principles of the HDD , obtained the working conditions of the elastic arm . Then , the simplified 3-D model of the elastic arm is built with Solidworks 2005 . Import the 3-D model to ANSYS software .